To Top

1951 Wagon Ellensburg, Wa **SOLD**

March 30, 2010 • CATEGORIES: Willys Wagons • TAGS: . This site contains affiliate links for which I may be compensated.
1

UPDATE: **SOLD** Was $6200

(02/17/2010) Nice Wagon!

“A Cool 1951 Willys Wagon. It is a two wheel drive. The engine is a fuel injected Vortec V6 backed up by a 5 speed manual with about 45,000 miles on them. Just installed this summer is a heavy duty mustang II independent front suspension with tubular a arms power disk brakes and rack and pinion POWER steering. New shocks all around, just tuned up and oil change, does have a collectors license. Wipers, lights all work turn signals installed, high-back bucket seats in front, foldaway bench in back with 5 seat belts installed. guages work. Gets about 24 mpg and good power. cruses at 75 with no problems. get in and drive it. you don’t have to mess with mechanicals. ”

[fb_button]
 
To Top

1970s Jeep Go-Kart Greenfield, Wi **SOLD**

March 29, 2010 • CATEGORIES: toys This site contains affiliate links for which I may be compensated.
0

UPDATE: **SOLD** Was $500.

Matt spotted this great find in Wisconsin.

“vintage 1970s pepsi soda jeep truck go kart has gas powered engine in great shape size 21 tall by 62 long and 33 wide 500.00 or best offer”

[fb_button]
 
To Top

1957 CJ-5 Orange County, CA **SOLD**

March 29, 2010 • CATEGORIES: CJ5 This site contains affiliate links for which I may be compensated.
0

UPDATE: **SOLD** Was $1100

The body looks in great shape.

“I HAVE 1957 JEEP CJ5 VERY CLAEN US FOR PARTS OR TO RESTORES CALL MIKE FOR QUESTIONS PINK IN HAND”

 

[fb_button]
 
To Top

1951 CJ-3A Salinas, CA **SOLD**

March 29, 2010 • CATEGORIES: CJ-3A • TAGS: . This site contains affiliate links for which I may be compensated.
0

UPDATE:  **SOLD** Was $2800.

It needs a little work.

“1951 CJ3A Willys Jeep. The Good: Complete, mostly original, flat-four. Also includes full 6-point cage, new tires, new shocks, new gas tank and lines, and new brake lines. The Issues: It has been sitting for a while and was in the middle of a 12-volt conversion that was never finished (no generator or alternator currently) when I bought it, wiring needs attention, turns over and starts, has a couple rust-out spots under the rear tail lights, quater size hole under the drivers seat in the pan, and rust in the rigger body braces under the body near the frame (where the wood was located). No pink slip.

I bought it as a project and have not had the time to finish it. It had been sitting for a while prior to me buying it… I massaged the cylinders with some Marvel oil, added some fresh gas to the carb and it cranked over and it tried to run. Sputtered, puttered, but ran. Since then, I have replaced all the gas lines, cleaned the new tank (it had old gas in it), added two inline filters, new plugs, new wires, and there it sat. Thus, I know it’s not frozen and only needs minor tweaking to run.”

[fb_button]
 
To Top

1947 CJ-2A Wenatchee, Wa $2000

March 29, 2010 • CATEGORIES: CJ-2A This site contains affiliate links for which I may be compensated.
0

Here’s a pretty good looking project.  It appears some good work has already been done.

“47 CJ2A needs to be assembled. 1.Frame needs brake cylinder kits installed. Have kits. 2 Body has section in tool box under passenger seat that needs patched otherwise it needs small dings fixed. Its in very good condition. 3. Has good windshield and grille and fenders and tailgate. Just need to be bolted on. 4. Engine was supposed to be rebuilt. I put new gaskets in it but ran into problems when I tried to put the oil pump in. It ruined the gears on the pump but have a pump that gears can be taken off of. Not sure what is the problem there. May need a new cam or just a better gear?. Flywheel has been turned and ready to install. Have 16″ rims with old tires for it, but the 15″ tires for pushing it around go with it. Have a steering wheel but needs to be epoxyed. I have too many projects right now so I decided to sell it, but will keep it if I can’t get what I have into it out of it. Body and parts are really nice condtion.”

http://wenatchee.craigslist.org/cto/1667108546.html

[fb_button]
 
To Top

1948 CJ-2A Southern New Jersey $4800

March 29, 2010 • CATEGORIES: CJ-2A • TAGS: . This site contains affiliate links for which I may be compensated.
0

This looks pretty stock.

“1948 CJ2A Jeep willys…. 100% Frame restoration, New brake lines & hoses, New brake clyinders, New Clutch, New shocks, Rebuilt 134 4cyl Flathead (3 Miles on Engine).. Rebuilt T-90 trans w/ dana 18 transfercase… New universal joints front and rear.. Dana 41 rear, Dana 25 Front….. Runs and drives.. Needs very little body work.. Comes with a spare rolling frame in great shape.. Also lots of extra parts.. Non original seats!!! $4800 cash firm CLEAR NJ Title, or will trade for a Harley or older triumph or Indian.”

http://southjersey.craigslist.org/cto/1666379601.html

[fb_button]
 
To Top

1958 Truck Reno, Nv **SOLD**

March 29, 2010 • CATEGORIES: Willys Trucks • TAGS: . This site contains affiliate links for which I may be compensated.
2

**SOLD**

“For Sale:1958 Willys Jeep pickup 4×4, 226 ci super hurricane flathead 6 cyl engine,manual trans. Body is pretty good shape other than the rust in the floorboards(not a bad repair),little rust elsewhere in the truck. Rear window is cracked,otherwise glass is good.The engine should run with a good 6 volt battery, almost had it fired when the battery in it gave out comepletely. Good resto project or good to customize. Asking 1000.00 O.B.O”

[fb_button]