Some interesting mods on this custom build.
https://medford.craigslist.org/cto/d/anderson-willys-jeep/7500926755.html
“49 willys cj2a
Chevy v8 327
auto trans runs and drive great
super clean jeep.
ready to drive right now.”
Some interesting mods on this custom build.
https://medford.craigslist.org/cto/d/anderson-willys-jeep/7500926755.html
“49 willys cj2a
Chevy v8 327
auto trans runs and drive great
super clean jeep.
ready to drive right now.”
Bill shared this hardtop-ed Mitsubishi jeep for auction on eBay (currently $1525).
View all the information on eBay
“This 1979 Mitsubishi J24H Jeep is an original. The owner has had it for 1 year. The vehicle is drivable.
2.7L 4DR5 Diesel 4 cylinder, 30 MPG
Ultra Tough 24V System
4WD equipped
Right Hand Drive from Japan
Runs and drives good, turn key starts up every time. Off road ready Willys style JEEP!
Front floor pans will need to be replaced, I found replacement floors for about $60 total for the metal
Everything else is solid, a few imperfections, dents as seen on pictures
Very cool unit that you could get into for cheap and restore to your desired taste.
Please message me with your email if you would like a short walk around video of it running”
“
UPDATE: **SOLD** Was $7500.
Glenn’s helping sell this CJ-5 with a Koenig PTO winch.
“Grampa’s JEEP just out of storage. It’s a CJ5 put together many years ago from several donors. All stock, no rust, nice full cab, free running hubs, recent paint, looks great but not show quality. Body has been weld repaired, excellent frame, brakes working well, all gears quiet, engine runs but has an ocassional skip. Nice Koenig PTO Winch as per factory specs. I just drove it around and it goes and sounds like an old Jeep should, like an old school build from the 70’s. Maybe fresh gas or some tune up will help, but you can go JEEPIN’ today. Selling for a friend, Grampa’s Grandson. Grampa lived to 100 and was a fanatic about details. Bill of Sale only. If you need title, it’s at your expense as Maine is no title needed for this vehicle. Contact me thru C.L. for phone, more pix, or discussion.”
This apparently has a rear facing PTO, but there’s no hole in the bumper for the shaft to connect to a rear gearbox (or am I missing something).
https://www.facebook.com/marketplace/item/1076917716502717/
“1947 CJ2A Willys Jeep Very original condition except for paint and seats Starts, runs, drives, and stops great Still 6 volt system Has rear PTO setup Comes with many extra parts including plow w/pump and controls, extra set of 4 original painted wheels with tires, transmission, new hood in box, lockout hubs, tow bar, and more! Recent work includes: complete new exhaust, new master cylinder, new battery and voltage regulator, seat belts, new ignition and light switches, transfer case output shaft seal, windshield wiper assembly. I will consider interesting trades Located in northeastern Pennsylvania”
This looks to be an ex-racing jeep. That pinto engine might have some other HP updates besides the offy intake manifold. Note those “heart” rims; I’ve never seen them before (see last pic).
https://portland.craigslist.org/clc/pts/d/brightwood-40s-willys-jeep/7499992613.html
“Old Willys jeep project. Pinto motor with offenhouser intake and custom header- doesn’t run appears to have factory transmission/ transfer case but I’m not an expert on that. 4×4 with power steering custom wheels and tires. Full set of the wide wheels with turf tires that are old plus tractor tires that appear to be in very nice shape. Custom roll cage – aftermarket gauges . No title not street legal price is Firm clearing up the yard of projects so no trades- lots of potential- thanks”
Includes a rear PTO with gear box.
https://www.facebook.com/marketplace/item/574163684120206
“Runs, drives, but does not stop. Need tub for restoration or would work well on a farm. 4wd works and so does the PTO. It is not the correct engine for this year model. Sold with bill of sale but bonded titles arr easy to get”
The body looks in great shape.
https://www.facebook.com/marketplace/item/1302157690193757
“I have a very nice 1974 CJ-6 for sale with a great running 4.2 (258) straight six cylinder. Motor runs perfect and is strong. PO siad it had a rebuild about 4K ago. I believe it. Jeep came out of Colorado and is pretty much rust free and very solid, including hats channels, floors and tool box floor. Very hard to find these in New England or anywhere else for that matter. Original T14, Dana 20, flanged 44 rear and Dana 30 up front with drums on all four corners. Brakes were done by PO and have all new parts, but need to be blead better.
What I have time to do and new parts include new Bestop just installed last year new. 5 ew BFG Mud Terrains 31/1050-15 on Renegade alloy rims. Rims are good from 10 foot away, but could use a good cleaning. Also added last year was a very nice and straight swing tire carrier close to correct era. Jeep was originally cooper metalic, not orange. Full roll bar, nicely done. New full tank. Power steering, but manual brakes. Very comfy seats even for bigger people. Installed new rear emergency brake cables. Awesome running 74 intermediate CJ6.”
UPDATE: **SOLD** Was $2800.
Seems worth a look.
“Pretty Fair 51 Flat Fender, Flat Head 4cyl and original running gear. I installed 2 1/2 Rancho Springs and a SNAP High Torque Starter with Starter Button. I still have the original Foot Starter. Minor rust , floors have been replaced. Have extra Trany and drive lines as well. Runs great and driveable Needs minor work to be roadworthy. Breaks and wheels cylinders replaced about 10 years ago, New Fuel tank and fuel pump. Seats Recovered.”
This was up for sale back in 2012. Now, it’s being relisted. No description provided.
Given the colors, this is likely a former Shriner Jeepster.
https://www.facebook.com/marketplace/item/2247946072019868
“1948 Willy’s jeepster. 305 ci edelbrock intake and Holley Carb, headers. Heads redone last year. Needs 2 side vent windows and a new top. Frame is there but needs fabric. Inspected, runs and drives”