To Top

1947 CJ-2A Phelan, CA **SOLD**

• CATEGORIES: CJ-2A • TAGS: This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was $2400.

It’s got the Worman-manufactured early half cab.

1947-cj2a-phelan-ca5 1947-cj2a-phelan-ca6 1947-cj2a-phelan-ca7 1947-cj2a-phelan-ca8 1947-cj2a-phelan-ca9

“1947 Willys cj2a Factory half cab very very rare ! A link below will explain this cab. Floor is soild need rear quarter repairs, engine and trans are froze
$2200.00 with bill of sale $2800.00 if i find the pink slip.

Cash no checks no cashier’s check

If it’s listed it still for sale

This is the factory cab not aftermarket Sears, JC Whitney, Acme

UPDATE: I’ve been asked if this is a Worman MFG cab ,from my understanding wormans were the first aluminum Willys Factory contracted. Please click link below for explanation on this cab

Like most steel aftermarket hard tops, the Willys halfcab was much too heavy to casually remove and re-install, so many of these impressive half cabs have been scrapped, making this a rare and very desirable hard top.

https://www.cj3b.info/Hardtops/WillysHardtop.html

[fb_button]
 
To Top

CJ-2A & M-38A1 Parts Antelope, CA

• CATEGORIES: CJ-2A, M-38A1 This site contains affiliate links for which I may be compensated.

A CJ-2A body and various parts for sale.

https://losangeles.craigslist.org/ant/pts/d/lancaster-willys-cj2a-project/7501780642.html

cj2a-parts-antelope-ca43 cj2a-parts-antelope-ca4

“1946 cj2a tub with vin $600
Flat fender 1 peice fiberglass front end $50
Stainless steel flat fender windshield $200
M38 windshield frame $50
Cj2a front fenders $50
Cj5 frame $50
M38a1 grill with radiator sold
M38a1 antenna with mount $20
M38a1 gas tanks x2 $20 each”

[fb_button]
 
To Top

Year? MB Valley Center, CA $1300

• CATEGORIES: MB This site contains affiliate links for which I may be compensated.

UPDATE: Price dropped to $1300.

(05/27/2022) This project is about to be reclaimed by planet earth.

https://sandiego.craigslist.org/ssd/cto/d/valley-center-mb-willys-jeep-project/7501534435.html

mb-sd-cali5 mb-sd-cali7 mb-sd-cali8 mb-sd-cali9

“For sale is a willys MB project vehicle. Includes
Orginal Willys MB tube
front fenders
with replacement floor with surface rust.
Seat frames
A 1950s willys jeep chassis
Front and rear axles
Go Devil Willys engine block 50’s era
Have exhaust and intake manifolds two different carbs
A complete tranny and tcase
steering column
Maybe an air cleaner
And whatever other parts I have that I can find.

This is a orginal as is jeep. Its not perfect in any way. The floors have been removed from the orginal tube and that is why it comes with a new set of floors.

I will not separate anything from the lot. Please do not ask.

Will except all reasonable offers!

[fb_button]
 
To Top

Half Year Gone Already!

• CATEGORIES: News This site contains affiliate links for which I may be compensated.

That was a quick first half of 2022! It seems like it was just January…. Just this update today, as I will be busy installing some final trim on the guest house so the trim can be painted (see the bottom pics).

Our highlight from the Fourth was a short visit by Cowboy and Donna on their way from Illinois to the ocean. Cowboy accompanied Russ on our 2017 trip to Alaska and we’ve remained good friends since (as all the trip participants have). Somehow, I got no pics of the four of us!

However, to help them spot our place, I drove Patterson to the front of the property: It made for a couple good pics. 
2022-07-04-fourth-patterson1 2022-07-04-fourth-patterson2

Our lowlight from the Fourth was watching the dry hills a few miles to the south of us catch fire from idiots shooting illegal fireworks over the dry Horse Heaven Hills. I’d estimate the fire line was roughly 2 miles long. This morning, this section of the hills is black; thankfully, the fire(s) are extinguished.

2022-07-04-hills-fire

On another note, I was surprised on the 3rd to see this CJ-3B sitting in our neighbor’s field across the road. This is the first time I’ve seen the 3B at their place. They were shooting at something, presumably marmots. I’ll find out more about the jeep when I next see them:

cj3b-neighbor

Finally, Ann decided it was time to paint the guest house, so I’ve been enlisted to finish up the exterior window trim (for some reason this was never completed). Here’s a before look at the rather bland colors:

2021-09-little-house-outside-lores

Here, the red color is mostly completed, giving it much more of a “barn” feel. The dark blue will be replaced with white.

2022-07-04-fourth-little-house

 

 

[fb_button]
 
To Top

Updates on the Racer

• CATEGORIES: Bantam-FordGP-WillysMA-EarlyJPs This site contains affiliate links for which I may be compensated.

I hope everyone enjoys their Fourth of July! We are spending it at home as we work on various projects. I’ve mostly been focusing on jeeps, while Ann has taken on painting the guest house a barn-red color. 

I spent some time a couple days ago work on the racer’s frame (removing and grinding). Along the way I discovered a few interesting tidbits.

Here’s where I started, with the gas tank, battery, and cowl in place. Because I want to gain a few more inches for the cockpit, I want to move the gas tank and battery back farther, which means redoing the mounts for both.

Before removal:

2022-06-30-frame-work-racer02

After .. you can more easily see the custom crossmember that was added when the frame was widened. Not the prettiest installation work.

2022-06-30-frame-work-racer01

While looking at the rear of the frame, I noticed that the frame seems to widened further in back. It turns out the rear of the frame rails is about 1.5″ wider than the mid section and front section of the frame. I don’t believe that was intentional. Here are a couple pics looking down both frames rails. It’s easy to see the frame’s bows. However, I don’t want to redo the entire frame at this point; I’m more interested in functionality.

2022-06-30-frame-work-racer0 2022-06-30-frame-work-racer1

It’s hard not to want to toss the frame and do a full rebuild, but I don’t want to make that investment of time and money until I’m sure I still enjoy racing. It just has to be safe, comfy, and dependable. Looks can come later.

Continue reading

[fb_button]
 
To Top

1971 Jeepster SC-1 Sport Commando Walla Walla, WA **SOLD**

• CATEGORIES: Jeepster This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was $19,995.

Ken shared this rare Jeepster SC-1 Sport Commando. This one has had some mods. You can learn more about them in the Motor Trend article: https://www.motortrend.com/features/1710-1971-jeepster-sc-1-hurst-commando/

1971-jeepster-commando-sc1-w2-wa6 1971-jeepster-commando-sc1-w2-wa7 1971-jeepster-commando-sc1-w2-wa8 1971-jeepster-commando-sc1-w2-wa5

“This 1971 Jeepster Commando SCI and the 1971 Jeepster Hurst Edition were built for only a couple of months or so making them the rarest Jeeps ever built. Only around 300 of each were ever built and around 125 Hurst Editions are known to exist and less SC1’s are known to survive making it the rarest Jeep known.

I bought it pretty much as is a few years ago adding the wheels and tires. Everything mechanical was rebuilt like the V6 engine and upgraded in horsepower with 4bbl carb, turbo 400 tranny both rear end and front end. Power Steering and Power brakes were added and an aftermarket stereo replaces the original radio and unfortunately small refinements were made to the dash to get an earlier edition radio to fit.

Continue reading

[fb_button]
 
To Top

1949 CJ-3A Edmond, OK $10,500

• CATEGORIES: CJ-3A This site contains affiliate links for which I may be compensated.

Has a variety of updates.

https://www.facebook.com/marketplace/item/747704586678747

“Relisting since potential buyer cancelled. 1949 Willys CJ3 in good condition, drives very well, no rust, not a project. Small V6 with 3-speed manual transmission. Tonneau top and full top with doors. 5 matching wheels and tires. Will consider trade for 65-73 or 79-93 Mustang or newer Wrangler of similar value.”

1949-cj3a-edmond-ok6 1949-cj3a-edmond-ok7 1949-cj3a-edmond-ok8 1949-cj3a-edmond-ok9

[fb_button]
 
To Top

1963 CJ-5 Prague, OK $4800

• CATEGORIES: CJ5 • TAGS: This site contains affiliate links for which I may be compensated.

Nice wheels/tires. I’m pretty sure the faux battery box lid was phased out after the 1963 year, which suggest this might be a 1962 or earlier. Has a Meyer hardtop, with a handy-looking luggage rack, and a Ramsey PTO winch.

https://www.facebook.com/marketplace/item/697706211497483

“Hard top cj5 willies with doors Ramsey winch pto option starts and drives with new tires and spare cool all original minus seats cold take less if u have a diff set of wheels”

1963-cj5-prague-ok1 1963-cj5-prague-ok2 1963-cj5-prague-ok3 1963-cj5-prague-ok4

[fb_button]
 
To Top

1959 CJ-3B Hutchinson, KS $8998

• CATEGORIES: CJ-3B This site contains affiliate links for which I may be compensated.

The rear cargo area might have been rebuilt.

https://www.facebook.com/marketplace/item/539873397833654

“1959 Willy’s Jeep CJ3B Rare “High Hood” model Runs and drives! Has some rust Not perfect but a good project that doesn’t need much! 3 speed manual 4 wheel drive New brakes all the way around! Full soft top and soft doors Hard to find Willy’s!”

1959-cj3b-hutchinson-ks1 1959-cj3b-hutchinson-ks2 1959-cj3b-hutchinson-ks3 1959-cj3b-hutchinson-ks4

[fb_button]
 
To Top

1964 CJ-3B Mesquite, TX $15,000 OBO

• CATEGORIES: CJ-3B This site contains affiliate links for which I may be compensated.

Needs some tuning at the very least.

https://www.facebook.com/marketplace/item/441564257438209

1964-cj3b-mesquite-tx

“1964 Jeep CJ3b, the last year for the flat fender jeep. Runs and drives, but needs a little TLC. Frame off restoration done by Gateway Classic cars in late 2014. Dauntless V6 with a 3 speed manual trans. 4×4. My grandparents purchased it at auction and took delivery in December of 2014. It sat outside for a couple of years, and as a result, the top has mold on the inside. No rips or tears, but I have had the top off ever since I bought it from my grandparents because it feels bigger and cleaner without it.

Been inside my garage since I bought it. Needs a little carb work, nothing major. Runs and drives, but it does need to warm up quite a bit to get it to idle well. New tires January 2021. (Brand new spare in back.) New battery January 2021. New Brakes February 2021. New Radiator February 2021. And a few more repairs since then. Paint is in great shape, but does have a few blemishes. Incredibly clean, rust free. OBO or trade. Let’s make a deal.”

[fb_button]