To Top

1948 CJ-2A Lincoln City, OR **SOLD**

• CATEGORIES: CJ-2A This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was $2000

This looks like a great price.  This would probably make a good foundation for a project, given the updated motor, windshield, a good top, and misc parts.

“This is a 1948 Willy’s Jeep CJ2A. It is not ALL original, however, the body, transmission (T-90 manual 3 speed), transfer case, shifters, seats, and windshield are. It also has a rear tow hitch and front tow bar so you may tow it away behind another vehicle. The transmission may be 61 years old, but it still runs and shifts like a champ. It includes aftermarket roll bar, top, swinging jerry can and tire rack, and an almost new exhaust system (dual cherry bombs). The brakes were recently re-done. The engine is a 1964 225 V6 Buick engine with a Rochester single barrel carburetor which was recently re-built. There is no way to tell how many miles are on the engine, as it is not original. It can really move if it needs to. As of right now, the transmission has been dropped, as the clutch has gone out, and will need to be replaced before it can run. I’m not sure which clutch it needs, a Buick or Jeep, as the transmission is original and the engine is not. Tail lights, head lights, blinkers, and hazard lights all work. There is no fuse box, but several in-line fuses have been installed. It’s a shame for me to have to sell this old Jeep, but I simply don’t have the time nor the money to restore it to is original beauty.”

1948_cj2a_lincolncity

[fb_button]
 
To Top

1947 CJ-2A Wichita Falls, Tx **SOLD**

• CATEGORIES: CJ-2A • TAGS: This site contains affiliate links for which I may be compensated.

1947_cj2a_wichitafallsUPDATE:  Was $2000. **SOLD**

It looks good on the outside, but sounds like it could use a little bit of maintenance.  The windshield frame looks bent.

“1947 CJ2A for sale. This jeep is perfect for the deer lease or as a starter for a frame up restoration. It has some needs but it runs great and has had a ton of work done in the past year. It could use some transmission work (pops out of second on occasion), a new exhaust manifold, some gaskets replaced to slow a few leaks, and some metal work on the floor pans but it shouldn’t need anything if you want to use it on the trail or at the deer lease. In the past year, I replaced the intake manifold, distributor cap and wires, rebuilt the starter, rebuilt the generator, replaced the shocks, replaced all of the seat cushions and the back seat frame, put on new brake shoes and replaced brake lines, replaced the brake master cylinder, rewired most of the jeep, replaced the gas tank and fuel hose to the carburetor, stripped off all of the old paint and gave it a garage paint job for protection. It starts right up every time and runs great for a 1947”

[fb_button]
 
To Top

My Build: Where to put the CB?

• CATEGORIES: Biscuit This site contains affiliate links for which I may be compensated.

The last time I did any serious jeeping was long enough ago that I’d never heard of a cell phone.  Instead, we communicated wirelessly through a really hot technology called a Citizens Band (CB) Radio.  It was long enough ago, that CBs were still cool.  It was amazing.  We could all communicate, sort of, in between static, wirelessly.  It was so cool!

So, of course, Biscuit’s an old school jeep, so it has to have a CB.  Fortunately, among the parts jeeps I purchased a couple years ago, I managed to recover 2 CBs, one of which still works.  I figured that there still aren’t any cell towers on the Naches Trail (please don’t tell me if there is … I’m turning off my cell phone … turning on my CB, so I can listen to it crackle), so I’ll still get to use a CB, even if it is less frequently than before.

Now that I’ve decided to install a CB, where do I put it?  I considered a couple options (hang off the front roll bar loop/ off the dash board / off the windshield), but decided I would piggy back it onto my center console (documented here).  I used some flat steel from a different part of the same chunk of hood that I used to make the console.

Here’s the basic pattern I cutout.

cb_the_pattern

After cutting the piece out of the hood, I sanded it and bent it.  Then, I drilled some holes between the old piece and the new piece and used poprivets to connect them.

cb_inprogress1

cb_inprogress2

cb_inprogress3

Below the console is installed, though not painted yet, showing how the CB will sit.  The power wire and antenna wire will feed from the console.  You can see how scratched up the console is already.  I’m saving the repainting for the next, inevitable, rebuild.

cb_final

[fb_button]
 
To Top

1955 CJ-5 Riverside, Mo $6000

• CATEGORIES: CJ5 • TAGS: , This site contains affiliate links for which I may be compensated.

Rick asked me to post these pics of his 1955 CJ-5 that he has put up for sale. The VIN is 5754811227.  Rick also sent me a couple of rebuilt postal jeeps that I’ll highlight tomorrow.

He wrote, “1955 Willys CJ5 completely restored 2 years ago. Everything is new or rebuilt. All original except seats, and carb & air cleaner. I have the originals and they are perfect condition. Asking $6000.00, or trade for a flat fender in good condition. Trade should be of equal value, or buyer willing to pay difference in value.  This Jeep is ready to go. Has tow bar, and 5000 pound winch with in cab controls. Price includes snow blade and bed extension. She is street legal, and will pass state inspections. Call Rick with any questions. Please e-mail pics of possible trades to RandBMfgInc@worldnet.att.net.”

willys pics for ebay 016

55. white jeep 003

55. white jeep 005

willys pics for ebay 003

willys pics for ebay 006

willys pics for ebay 011

willys pics for ebay 016

willys pics for ebay 022

willys pics for ebay 024

[fb_button]
 
To Top

1953 CJ-3B Burien, Wa **SOLD**

• CATEGORIES: CJ-3B This site contains affiliate links for which I may be compensated.

UPDATE:  **SOLD** Was $5500

There’s a variety of updates to the drivetrain.

“For sale is my 1953 Willys CJ3B. It has brand new 33″ TSL Swampers on black rims, windshield wipers, Mojave heater, Bestop soft top, new in box Superwinch 8000# winch w/mounting plate, starter and battery.Buick V6 w/fenderwell headers, TH350 Auto, Dana 18 T-Case w/OD, It has 11″ brakes, rear dana 44 with loc-rite, front 27 with powerloc, power steering, soft ride leaf springs, tow bar and tilt wheel. Also have extra set of 31″ radial tires on rims. Everything works great, tabs are good but just don’t drive. Will sell for $4500 minus the Swampers and winch w/plate. make me an offer befor the snow comes.”

1953_cj3b_burien

[fb_button]
 
To Top

1949 CJ-2A Puyallup, Wa $500

• CATEGORIES: CJ-2A This site contains affiliate links for which I may be compensated.

This looks like a decent price on some flattie parts.  If you are looking for corner and side diamond plating, it appears it comes with them (though it’s installed).

“1949 Willy’s Jeep. No frame only the body, tub, grill, windshield, and miscellaneous parts. $500 or best offer. This will be a fun project for sure. e-mail me at sky_blu@rocketmail.com”

http://seattle.en.craigslist.org/tac/cto/1462027022.html

1949_flattie_parts_puyallup

[fb_button]
 
To Top

1947 CJ-2A Stoughton, Wi eBay

• CATEGORIES: CJ-2A This site contains affiliate links for which I may be compensated.

Here’s a mix and match jeep that sounds like it’s had a bunch of modifications.

“I’m re-listing my 1947 WIllys CJ-2A. This is a super nice, restored Willys that you can drive anywhere or it also has a really nice towbar that goes with it so you can drive here to pick it up and tow it home! It has a clear Wisconsin title but it is titled as a 1960 CJ-5.    This Willys was completely tore down to the frame about 12 years ago and professionally rebuilt.    The 1960 CJ-5 frame number matches the title.   Odometer actually shows about 5,800 but I’m listing this as under 10,000 miles because of tire size. Drivetrain is a rebuilt Buick 231 cu. in. V-6 with a rebuilt Turbo 350 automatic transmission.   Engine has an HEI distributor.   It has a Lokar street rod shifter.   Carburetor is a Holley 390 cfm four barrel on a 4.1 Buick aluminum intake.  Heads and intake are port matched.  It has fender well headers and dual exhaust….”

View all the pics on eBay

1947_cj2a_stoughton

[fb_button]
 
To Top

1948 CJ-2A Hamilton, NJ **SOLD**

• CATEGORIES: CJ-2A • TAGS: This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was on eBay.

This looks good on the outside.  Note that the corners have painted diamond plating.

“1948 Willys Jeep Style, 90% Restored. Runs Exellent. I have spent alot of Time and money on this Jeep, But Due to hard times (BAD ECONOMY) I must sell 🙁 Pictures don’t show the full sized top,with doors, that is included. I bought this jeep from a farmer who kept it in a barn for most of its life. Iv’e had it for 7 years Doing a little at a time. Good Luck She’s a great little truck.”

1948_cj2a_hamilton2

[fb_button]
 
To Top

1946 CJ-2A Whitesburg, Ky eBay

• CATEGORIES: CJ-2A • TAGS: This site contains affiliate links for which I may be compensated.

It looks it good condition.  It’s got the f-head telescope.

“1946 willys cj2a its in great condition and the color of it is red with a brand new cloth top running gears work perfect and 4 wheel drive works perfect..and new breaks,head lights,paint job..and has a L134 engine.”

View all the pics on eBay

1946_cj2a_whitesburg

[fb_button]
 
To Top

1962 CJ-3B Santa Rosa, CA **SOLD**

• CATEGORIES: CJ-3B • TAGS: , , This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was $4000

“1962 Willys Flatfender High Hood, Navy Jeep has a Navy Plack on the dash, 3B, stock 4 cylinder engine, spring over, 35″ BF Goodrich mud terrains, Runs Good. $4000,”

1962_cj3b_santarosa2

[fb_button]