To Top

Willys 1952-55 Truck – $2,500 Stephenville, TX

• CATEGORIES: Willys Trucks This site contains affiliate links for which I may be compensated.
Willys 1952-55 Truck – $2,500 Stephenville, TX
Some what of a Salad listed as a ’52-55, parts are earlier then that. Not sure what frame it’s sitting on says shortened, maybe they boxed it in?
INFORMATION FROM SELLER:
No engine, Transmission, or Transfer Case currently in the truck
Chassis was shortened
The bed is stock
NO TITLE
Can be seen on Hwy 281 North of Stephenville, Tx
https://dallas.craigslist.org/dal/pts/d/lipan-jeep-willys-truck/7919893136.html

 

[fb_button]
 
To Top

Willys DJ-3A 

• CATEGORIES: DJ-3A This site contains affiliate links for which I may be compensated.
Willys DJ-3A 
DJ-3A, want to search up some other examples check out our archives for any make and model of Willys. https://www.ewillys.com/?s=DJ-3
INFORMATION FROM SELLER:
Not much to add here from the seller, it’s listed incorrectly as a 1942.
https://houston.craigslist.org/pts/d/houston-jeep-willys-1942-needs-full/7921042287.html

[fb_button]
 
To Top

1947 Willys Truck RAT ROD- $6,500 Cordova, AL

• CATEGORIES: Willys Trucks This site contains affiliate links for which I may be compensated.
1947 Willys Truck RAT ROD- $6,500 Cordova, AL
INFORMATION FROM SELLER:
I have a 1947 Willys Jeep pickup Rat Rod. It’s setting on an S-10 Blazer 4×4 chassis, has small block Chevy with automatic. It runs and drives good, has new tires. Price is $6500, Sold As Is.
https://bham.craigslist.org/pts/d/cordova-1947-willys-jeep-pickup-rat-rod/7892919307.html

[fb_button]
 
To Top

Monroe Three Point Hitch for Willys Jeep $500 Yellville, AR

• CATEGORIES: CJ-2A, CJ-3A, CJ-3B • TAGS: This site contains affiliate links for which I may be compensated.
Monroe Three Point Hitch for Willys Jeep
$500 Yellville, AR
Not mentioned when listed.
INFORMATION FROM SELLER:
monroe hydraulic unit for willis jeep
three point hitch . arms have beeen modified for tractor use.  can ship
https://www.facebook.com/share/1AfDRLWZDe/

[fb_button]
 
To Top

1956 Jeep CJ-5 $5,000 Ashdown, AR

• CATEGORIES: CJ5 This site contains affiliate links for which I may be compensated.
1956 Jeep CJ-5
$5,000 Ashdown, AR
INFORMATION FROM SELLER:
I have a 1956 jeep has a factory hardtop with doors. It has a very solid tub 456 gears. It’s a very solid jeep for 56 model. My dad removed the motor and completely rebuilt it new pistons,rings,rod,main bearings new intake valves redid the head new fuel pump water pump new points in the distributor new plugs and wires. He has everything to put it back together has a 8000lb stand up warn winch, he has some more parts to go with it. Would make an awesome hunting rig or a farm rig, clean and clear title. He’s asking 5000 or best offer. We’re in Ashdown, Arkansas, and we can load. thank you.
https://www.facebook.com/share/1KJP7JpXTc/

[fb_button]
 
To Top

1946 Jeep CJ-2A $7,500 Murfreesboro, TN

• CATEGORIES: CJ-2A This site contains affiliate links for which I may be compensated.
1946 Jeep CJ-2A
$7,500 Murfreesboro, TN
INFORMATION FROM SELLER:
1946 Jeep CJ2A runs and drives great! It has the original go devil 134 engine and three speed transmission. It does not smoke or burn oil, it is a good healthy, strong engine. This is a project I’ve been working on the last couple of years. I’ve gone through the body completely, it has all new paint. My goal was never to make it completely perfect but to have a good representation of a 1946 Jeep. It could use a few odds and ends if you were wanting to really bring it up to total restoration quality. It needs nothing the way that it sits. I made a list of some of the repairs in new parts that are on it. I also have some of the old parts that go with it like the original 6 V generator, original windshield wiper , original heaters that go under the dash, and a bunch of other odds and ends. I went through the transmission and transfer case last summer. I ended up replacing about 90% of the gears,  all of the bearings and synchronizers, they are mostly new parts inside. I am not interested in lowball offers or trades. If you’re looking for an old jeep, this one is solid.
New tires and inner tubes
Refurbished wheels
New shackles
New exhaust from the manifold back
Rebuilt, transmission, and transfer case
New gas tank
Rebuilt carburetor
New spark plugs, distributor cap plug wires, and points.
New water pump
New radiator hoses
New exhaust manifold gaskets
12 V conversion
New wiring through the whole vehicle
New gauges
New soft brake lines
New windshield to body rubber gasket
New Besttop low back seats
And a bunch of other odds and ends that I’m sure I’m forgetting.
https://www.facebook.com/share/1FpDjbSkDo/

[fb_button]
 
To Top

1961 Jeep CJ-5 $1,300 Ellijay, GA

• CATEGORIES: CJ5 This site contains affiliate links for which I may be compensated.
1961 Jeep CJ-5
$1,300 Ellijay, GA
Not a ’61, maybe ’55 or ’56?
INFORMATION FROM SELLER:
Old jeep not sure the exact year model. I bought as a project and don’t have time for it.  It doesn’t run. Transmission is stuck in gear and needs a gas tank that’s about all I know about it. Body not in bad shape for the year. Does have a pto winch on the front.  Asking $1300 obo or trade
https://www.facebook.com/share/1DQdjAx5Wg/

[fb_button]
 
To Top

1954 Jeep Willys M-38A1 $1,000 Greeneville, TN

• CATEGORIES: M-38A1 This site contains affiliate links for which I may be compensated.
1954 Jeep Willys M-38A1
$1,000 Greeneville, TN
Do they pay to remove? So can I go -$7,500 might as well make it worth it don’t do the -$7501 either?
INFORMATION FROM SELLER:
Rare. Poor condition Willy Jeep. Estate sale.  Price is best offer.  Have Title.  Send questions.  No guess on mileage.  As is.  Sales to be completed in 30-60 days to highest bidder.
https://www.facebook.com/share/1DiZ75Sgy8/

[fb_button]
 
To Top

1942 Ford Freestyle $5,500 Joplin, MO

• CATEGORIES: GPW (Ford MB) This site contains affiliate links for which I may be compensated.
1942 Ford Freestyle
$5,500 Joplin, MO
INFORMATION FROM SELLER:
I had enough parts laying around to put together a 75% jeep. Ford tub, MB chasis. engine. T84 transmission.  F script front seats, most of the tub work is done(tub is not bolted in place) Joes motorpool floor parts. Fenders, hood grill still need work. No title. Bill of sale only. Great start for a reenacting jeep. Engine turns over by hand, t84 not locked up. Comes with extra parts as seen in photos. Rolls easy. Can help with loading. I will trade partial cash and dummy 1919a4 or dummy m1917a1. If its still listed its for sale. Will not respond to is it still available. Located in City limits of joplin, mo.
https://www.facebook.com/share/1FaMaFMcFF/

[fb_button]