Hood Research Archives

To Top

1964 CJ-3Bish San Fernando Valley, CA **SOLD**

February 2, 2012 • CATEGORIES: CJ-3B • TAGS: , . This site contains affiliate links for which I may be compensated.
0

UPDATE: **SOLD** Was $2700.

(01/30/2011) I thought this hood solution was an unusual way to deal with the longer frame.  I’m wondering if the frame is from a CJ-6?

“Selling my 1964 Jeep Willy X Flat Fender CJ-3A that has a new 390 V8 Offenhauser Engine. The engine has about 15,000 miles on it. It is a beast of an engine. You may want this jeep just for the Engine and parts to put into something you’re working on. this engine would be great for any hot rod or racing vehicle. The jeep is in great running condition and has alot of power. A great off road vehicle. It also looks really cool and has custom body work. I bought this jeep with the intent of driving it and fixing it up, but i haven’t had the money to do alot, i’ve done a few things, but it’s time to get something different to drive. I don’t want to put any more money into this jeep and second I need to get a different car. I have a family now and need something with doors lol. This jeep has power steering, tilt wheel, new dash with new dials, 3-speed transmission, locking hubs, nice rims with Pirelli tires. I’m asking for $2700 or best offer. I am also willing to take a vehicle trade. If you have something, show me and we’ll go from there. Cash is preferred though. Available to see anytime. Msg me for more info. Will answer back immediately.”

[fb_button]
 
To Top

Year? Stretched CJ-3B Grants Pass, OR **SOLD**

January 27, 2012 • CATEGORIES: CJ-3B • TAGS: , , , . This site contains affiliate links for which I may be compensated.
0

UPDATE:  **SOLD** Was $5000

This has a rare Bobcat CJ-3B Hood.

“The Jeep is a 1949 Willys on a custom 2×6 frame
Dana 44 front, Dana 60 rear shortened and braced
38″ swampers
327 v8
It is street legal!
Will throw in a BRAND NEW 8000lb winch w/remote if the deal is right
BAD: Steering comumn has play and the box leaks a little. I have another steering column for it
And this is a crawler! And I dont have a top or doors for it only a weathered bikini top”

[fb_button]
 
To Top

Fiberglass flattie body/hoods/grilles/fenders Puyallup, Wa $500

November 9, 2011 • CATEGORIES: Body Parts • TAGS: , . This site contains affiliate links for which I may be compensated.
4

oooh … the fiberglass hood shown is the same one I had on my first jeep. There have been only a few made.

“i got a fiberglass jeep tub, fenders, 2 hoods, 2 grills, a wind shield frame with cracked glass, and a cage. i stll have a rolling chassis but in rough shape and going to take to scrap if not interested.

please contact Brenden at 253-230-6846 call or text voice mail not set up, will respond asap to text

price is $500 or what i can get out of it”

http://seattle.craigslist.org/see/pts/2692902350.html

[fb_button]
 
To Top

1947 CJ-2A Fort Worth, TX **SOLD**

September 14, 2011 • CATEGORIES: CJ-2A • TAGS: , . This site contains affiliate links for which I may be compensated.
0

UPDATE: **SOLD** Was $4250.

This looks like it’s pretty hardy. I’ve never seen vents like those in the hood.

“For sale is my jeep 1947 CJ2A that have been modified. It has a 6 in Black Diamond lift on 33″ Pro Comp tires. It has a Buick 350 with matching transmission. Comes with a 9000 Warn winch. It has Dana 60 axels. Rancho shocks. This will make a great hunting vehicle.
For Pick up only.”

[fb_button]
 
To Top

1946 Flattie Saugerties, Ny $1600

January 7, 2011 • CATEGORIES: CJ-2A • TAGS: , . This site contains affiliate links for which I may be compensated.
0

UPDATE:  Price dropped to $1600

(11/03/2010) This sports a fiberglass body and an unusual (probably fiberglass) hood.  I’m not sure what the axles are from.

“For sale is a 1946 Willys MB customized jeep . Jeep has a built 283 smallblock installed , lift kit with 33’s, power steering, power brakes and hydraulic clutch. Body is fiberglass and in good shape. Motor has a new 750 double pumper Holley and runs well . Drivetrain is sound and all universals are in good shape . Both drive shafts are CV jointed to acomedate lift kit . Has Gas tank and battery in rear with heater in between seats . Also has New starter , rebuilt brake and clutch master cylinders and slave cylinder . Most brake lines new . Jeep is running in pictures and shows good oil pressure, temperature and charging . I have had it through the woods , in the mud and on the highway and it does all three like an animal . This is not for your 16 yr. old kid unless you need to downsize family . Come take a look and hear it run . Has tow bar so you can take home or I will deliver on trailer for fuel cost if you live near by . 845-246-1303”

http://hudsonvalley.craigslist.org/cto/2039744816.html

[fb_button]
 
To Top

1952 CJ-3A Beaverton, OR **SOLD**

September 29, 2010 • CATEGORIES: CJ-3A • TAGS: , . This site contains affiliate links for which I may be compensated.
0

UPDATE: **SOLD** Was $1500.

(08/14/2010) Check out the hood.  I believe that isn’t a custom creation.  I have seen 3 different kind of louvered hoods over the years.  2 had the louvres on top and one on the side.”

[fb_button]
 
To Top

Aluminum Flattie on Bronco Chassis Prescott, AZ **SOLD**

August 23, 2010 • CATEGORIES: CJ-2A, CJ-3A, Jeep Rods, Unusual • TAGS: , , . This site contains affiliate links for which I may be compensated.
0

UPDATE: **SOLD** Was $8500.

Here’s an aluminum flattie body on a modified Ford Bronco chassis.  As I mentioned in a post last week, the vented hoods are very rare.  I’m not sure if that’s aluminum or steel.

“Unique aluminum bodied CJ2 Jeep. This is a professionally built for off road, but very streetable CJ2. It is a real eye catcher. It features a highly modified 1974 Bronco chassis with 4 wheel disc brakes, dual master cylinders, urethane bushings, power steering, trans. cooler, power steering cooler, etc. It sits on, like new, 35X10X15 Goodyears. Power is supplied by a fresh 351w ford with edelbroch manifold and newly rebulit edelbrock 4 barrel, connected to a modified c-4 trans.and headers. It is an older construction, but is done right! I prefer cash, but will consider a trade for a nice cj or wrangler or ? and cash. ”

[fb_button]
 
To Top

1946 CJ-2A Guilford, IN **SOLD**

July 1, 2009 • CATEGORIES: CJ-2A • TAGS: , , , . This site contains affiliate links for which I may be compensated.
0

UPDATE: **SOLD** Was on eBay.

This has some interesting features.  The wide rimmed fiberglass body with no tailgate is unusual.  I’ve only seen the wide rimmed fiberglass bodys with tailgates.  The exhaust feature is something I haven’t seen either.  It appears to allow the drive to automatically switch between a direct header versus a muffler.  My concern with this jeep is the roll cage attached to the rear wheel wells instead of the frame.

“1946 Willys Jeep for sale. Great condition. Runs great. 2 Wheel Drive. Chevy 350 small block built by Hines Race Engines in Cleves, OH.  Automatic transmission, fiberglass body. Dual Flowmaster exhaust with electric exhaust cut-outs. New windshield, Daytona tires are like new. Edlebrock carburetor.  Moroso valve covers and air filter. 373 rear end.  Five point racing harness in the driver’s seat.  Some very small chips in the paint which are shown in the pictures.  I have pictures, drawings, and receipts from the build.  Mileage on title lists 75,000 but actual mileage is unknown.  Light weight and fast.”

1946_cj2a_guilford

[fb_button]
 
To Top

1947 CJ-2A Redding, CA **SOLD**

June 19, 2009 • CATEGORIES: CJ-2A • TAGS: , , , . This site contains affiliate links for which I may be compensated.
3

UPDATE **SOLD** Was $15,000

This is a beautiful build, but the price will scare a lot of buyers away.   A tilt front flattie is certainly rare enough to warrant posting.

“1947 CJ2A Willys:  Engine – 302 V8, New Edelbrock Carb, Edelbrock intake manifold, New Starter, water pump, one wire Alt, motor mounts, remote oil filter, All new gaskets, oil pan valve cover, front, rear main seals, new flex fan, 3 core radiator, rad hose’s. Transmission – NP435 Four speed with deep granny 6:98 tol, new bearings, seals, sincros and mainshaft, rebuilt with Advance Adapters kit to marry to Dana 18, also rebuilt with new seals, bearings and gaskets.  Front & Rear ends – Model 23 front-41 rear, rebuilt with new seals, bearings, gaskets 4 wheel full size disc brakes, new rotors, calipers, pads, hardware, front axle equipped with ATV manual hubs.”

[fb_button]
 
To Top

1948 CJ-2A APU Mesa, AZ **SOLD**

May 8, 2009 • CATEGORIES: CJ-2A • TAGS: , . This site contains affiliate links for which I may be compensated.
0

1948_cj2a_mesaUPDATE: This 2A with an APU was on eBay.

The body looks pretty smooth on this, but the hood certainly is unusual.  Also, it appears there is also an overdrive with it.

“1948 Willys Jeep 4Cyl, 3 Spd Manual This Is A No Reserve Auction Bid To Win. Here’s Another One Of Those Unique Super Fun Vehicles That Only Sullivan Motors Here In Sunny Mesa, Arizona Can Bring To You!!!!! Just Take A Look At The Pictures Of This Clean Willy Jeep, What A Great Color Combination!!!!!! The Red Exterior Paint Is In Nice Condition, The Black Vinyl Seats Are Very Clean, The 4Cly Engine Runs Very Strong, 3 Spd Manual Transmission And 4 Will Drive Transfer Case Shifts Smoothly In Every Gear Or As Well As They Did, AM/FM Cass, Premium Alloy Wheels And Much Much More….”

[fb_button]