Monthly Archives: July 2008

To Top

My Build — Transfercase Shifter

• CATEGORIES: Biscuit, Features This site contains affiliate links for which I may be compensated.

While you can purchase a dual shifting unit from Novak for your Dana 20, it's also possible to fashion one from scratch.  Note that I've never used the dual shifter on a Dana 20 transfercase without removing the center pins that move between the shift rods in the the shifting tower.  To remove the pins, you have to remove the shift levers, drill out the plugs on the sides (note where the red gasket sealant is on the side of the shift tower, and then slip out the oblong pins (they are elongated metal balls).  With these removed, you can push and pull the levers all you want (but don't try running high range in the front and low range in the back unless you feel the need to break something).

 
To Top

1962 M-170 Lake of the Ozarks, MO **SOLD**

• CATEGORIES: M-170 This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was $1200

These are rare enough that this is a fantastic price even if the brakes need a little work.

“This is an original 1962 Military Jeep. It runs good. Needs some brake work and other tinkering. Not a rust bucket. Would make a great hunting vehicle or just around the farm. I took these pictures yesterday”

 
To Top

1953 CJ-3A Sacramento, Ca $6500

• CATEGORIES: CJ-3A This site contains affiliate links for which I may be compensated.

This jeep has a variety of updates.  It's likely that if you did all these upgrades the cost of the jeep would probably come out around the above price.

" 231 Buick less than a 1000 miles, sm 435 trans, Dana 30 w/detroit, Dana 44 w/ARB, Custom drive lines, Power Steering, Tilt Wheel, Custom Bumpers, On Board air, 2.5 Inch lift springs, Reverse Shackles, Disk Brakes front and rear, Soft top Bikini top, Half doors, Stailess Braided brake lines and air lines, TOO MUCH TO LIST CALL AT 916-704-4963 do not email"

http://sacramento.craigslist.org/car/754263651.html 

 
To Top

1947 CJ-2A Puenta, Ca eBay

• CATEGORIES: CJ-2A This site contains affiliate links for which I may be compensated.

Here's a garage find.  The starting bid of $3200 is a bit high considering this hasn't been run in a while.

"garaged original 1947 willey jeep soft top with door, not running , 4 cyclinder body mint no visable rust sold as is looks complete engine may need to be gone through for pick up only from estate sale uncle passed away has not been moved in years 2 original black calif plates unsure of auctual miles"

View all the pics on eBay

 
To Top

1947 CJ-2A Sunnyside, Wa $3500

• CATEGORIES: CJ-2A • TAGS: This site contains affiliate links for which I may be compensated.

This seems like a reasonable price for an updated, trail ready jeep.  The windshield looks like it’s a CJ-3A windshield, but it is flat.  I wonder if there was some custom work done on it.

“1947 Jeep Willy’s with Chevy V6 engine. 4 speed manual transmission, power steering, tilt column, racing seats with 6 point harness and soft top. Has ultra aluminum wheels, 35″ Super Swampers and comes with 4 extra wheels. Includes tow bar.”

 
To Top

Hurricane 6 help wanted in the Troy Idaho area

• CATEGORIES: News This site contains affiliate links for which I may be compensated.

Here's an interesting ad for someone who needs help with their hurricane 6 engine.  Never worked with them myself.

"Looking for assistance with getting a Super Hurricane 6 running right. Seems to be carb.. Carter YF.. putting out too rich mixture so runs on only two or three cylinders with occasional four or five. Ideally, someone might be near with a known good carb to subsitute long enough to drive this gem from Troy to Palouse. Willing to pay for expert help, of course. Thanks, Bob in Palouse 509 878 1471"

http://pullman.craigslist.org/car/752056711.html 

 
To Top

How the transfercase shifting works

• CATEGORIES: Biscuit, Features This site contains affiliate links for which I may be compensated.

There was a question about how the shifting in my transfer case works.  (http://www.ewillys.com/?p=797)

The shifting might seem unusual, but it's not.  What's unusual is that I have removed the pins from the shifting tower that slide back and forth between the shift rods.  This allows for more shifting options.  To take advantage of those options, I installed two rather than one stick.   You can see that here in this video I made.

Here's an image the also demonstrates how the shifting works.  Please note if it doesn't make sense:-)

 
To Top

Year? CJ-2a/CJ-3a Nampa, Id $2800 — given away …

• CATEGORIES: CJ-2A, CJ-3A This site contains affiliate links for which I may be compensated.

Final Update:  Originally priced at $2800, the seller dropped the price to $1000, but changed the ad so that it was difficult to find.  Eventually, the seller made good on his claim and it was given to the Youth Ranch (I missed it by two days, otherwise I would have bought it for $1000).  I haven’t seen it since.

Here’s the text of the new Ad, just prior to it being given away:

THIS JEEP WAS REBUILT AND SAT 4-5 YEARS STARTS RIGHT UP NEEDS A FEW MINOR THINGS.  IF NOT SOLD BY 5 PM THIS WED. I WILL DONATE IT TO YOUTH RANCH SELLING AS PARTS OR RECON. ITS BUILT OUT OF CHEVY INTL. FORD PARTS $1.000 FIRM”

ORIGINAL POST —

Not many specifics on this flattie.  I’m gonna bet this is a CJ-3A.  Looks pretty old school, especially those tires.  From this pic it appears the front springs are reversed.

“his thing is built to the hilt the only thing jeep is the body, intl. running gear, new built 302, 4 speed , race seats, power steering, full cage , the motor is linked to the tranny by trans adapter . done right ,all ne wiring could use tires , and a few other odds and ends . motor sounds bad ass will look”


 
To Top

1953 CJ-3B Belton, TX **SOLD**

• CATEGORIES: CJ-3B • TAGS: This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was $3700. 

“All original, F-Head engine. Has Roll bar with gun rack, rear seat with additional base to raise for hunting. Street legal, Registered and inspected. Cash sale only”

 
To Top

Builds — Brian’s working furiously on his CJ-3B

• CATEGORIES: Builds, CJ-3B, Features This site contains affiliate links for which I may be compensated.

Brian sent me some updated pictures of his CJ-3B project.  He just finished reversing the springs in the front.  As a part of that reversal, he had to replace the front of the frame.  After conquering this task, he turned his attention to the rear differential, only to discover a big problem (which he'll update all of us about as he progresses through the issue).  

Brian explains more below about his spring reversal experience below …. 

"I wanted to do a spring reversal so I started by getting some universal after market parts to make things a little easier. Then I bought a early Cj5 frame for the front 8 inches then sold off a chrome bumper and ring and pinion at a small profit.

Here's what I did to lengthen the frame.

I cut a block to use as an template to cut off the front of the 3b frame. (Stan H. — from the Wandering Willys Jeep Club — always said to cut at a 45 degree angle though the frame.) I did the same with the pieces to be added. They lined up really nice.  

Continue reading