CJ-3B Research Archives

CJ-3B, CJ3b

To Top

1954 Jeep Willys CJ-3B $13,000 Van Nuys, CA – NO LONGER POSTED

• CATEGORIES: CJ-3B This site contains affiliate links for which I may be compensated.

UPDATE: 6-21-2025

Dan B was able to point out this one was David Tracy’s CJ3B, its no longer posted, so I don’t know if this was exactly his post or another. The info fits the description of the Jeep. There is quite a back story about the sale of the CJ here. If it did not sell, happy to repost the ad if there is an updated version please let me know.

https://www.theautopian.com/someone-drove-10-hours-to-buy-my-car-and-then-backed-out/

1954 Jeep Willys CJ-3B $13,000 Van Nuys, CA

Andy’s Picks

Cj-3b with pto accessories – gearbox, winch etc.

Information from seller:

This is a bone stock 1954 Willys CJ3B with an M38 tailgate/tire carrier. It comes with a power takeoff front winch, as well as an extra winch and an extra power takeoff gearbox. It runs and drives beautifully and was restored at some point in the not so distant past. The body is nice with some chipping bondo here and there and some surface rust here and there. This was clearly a California vehicle and with my recent tuneup, which involved replacing the entire fuel system and the entire brake hydraulic system, this is a turnkey Jeep ready for you to drive all summer. Needs a few things here and there like fuel gauge wiring and a park brake (I have some parts for it), but the big thing is the engine and transmission are strong as an ox. Price is firm

https://www.facebook.com/marketplace/item/955641540061371/?ref=saved&referral_code=null

[fb_button]
 
To Top

1953 Jeep Willys CJ-3B $3,200 Chatham, NH

• CATEGORIES: CJ-3B This site contains affiliate links for which I may be compensated.

1953 Jeep Willys CJ-3B $3,200 Chatham, NH

I think this is a good example of what makes eWillys exciting, this looks like a good deal on a neat Willys! Hope to see this one on the next Epic Willys Adventure, The Great Willys Picnic, The Willys Jeep Rally, one of the Reunions anywhere out in the wild! I would shoot over and take a look at this one with a second driver.

Information from seller:

1953 CJ-3B project car. New suspension, tires, wheels, headlights & signal lights, transmission+axel seals, fully rebuilt breaking system (master+slave cylinders, pads, drums). Comes with replacement wiring harness and windshield frame. No title but NH and Maine title exempt.

https://www.facebook.com/share/1FetVsz5d5/

[fb_button]
 
To Top

1953 Jeep Willys CJ-3B $2,700 Harwich, MA

• CATEGORIES: CJ-3B This site contains affiliate links for which I may be compensated.

1953 Jeep Willys CJ-3B $2,700 Harwich, MA

Another 3B at a good price point, this one is modified with a V8, but is listed as pretty solid.

Information from seller:

1953 Jeep CJ3B· Suv · Driven 81,000 miles For sale, 1953 Jeep Willys CJ3B. Very good candidate for restoration project. Has a dismantled v8 in it now. 1 spot of floor rot under gas tank. Clear title. 2700.00 located in Harwich Mass

https://www.facebook.com/share/1AYMPbrmuD/

[fb_button]
 
To Top

1954 Willys CJ3B Cab and Heat PTO $4,500 Onaway, MI

• CATEGORIES: CJ-3B This site contains affiliate links for which I may be compensated.

1954 Willys CJ3B Cab and Heat PTO $4,500 Onaway, MI

Andy’s Picks

CJ-3B in MI

Information from seller:

Runs and operates as it should, smokes some 6v positive ground 134 F head engine Offers in person only FB messenger

https://www.facebook.com/marketplace/item/1189840209485579/?ref=saved&referral_code=null

[fb_button]
 
To Top

1955 Willys CJ3B $18,000 Rigby, ID

• CATEGORIES: CJ-3B, Uncategorized This site contains affiliate links for which I may be compensated.

1955 Willys CJ3B $18,000 Rigby, ID

Not much description, but if everything is new and rebuilt, you cant build this for the price listed, maybe they have a build book you can review the process of what went into this.

If it’s someone you know, happy to post more information.

Interior looks great, motor looks fresh, some paint details need some attention, maybe rework the rear lights there are some nice options for those around. If Im going that big would be nice to have some flood light off something like those in addition to the extra safety stuff for brakes and turn signal.

The factory lighting at times is such a small target now a days.

Information from seller:

Motor rebuilt professionally. New everything.

https://www.facebook.com/share/19BTheoR6h/

[fb_button]
 
To Top

1953 Jeep Willys CJ3B $6500 Ridgeland, SC

• CATEGORIES: CJ-3B, Unusual This site contains affiliate links for which I may be compensated.

1953 Jeep Willys CJ3B $6500 Ridgeland, SC

Not going to see one of these everyday, the body lines look like someone put some effort and time into this one, I’ve seen a couple photos of a Willys cab on but not this exact configuration. Its not perfect and not priced or displayed as such, will need some clean up and some panels looked at, but again as I say often worth a look if you are in the market and local to this one to take a look. Plus has room here to make it your own.

Information from seller:

1953 Willys CJ3B that was custom built in Florida custom shop it has a 1935 international cab top that has been fitted to the jeep tub. Both doors open and close and the windshield even folds out like a 35 internal truck it has a 1958 corvette 283 it has the original power pack heads on the engine old school hot rod heads 600 Holley cfm sounds to have a small cam but do not know for sure it still has original jeep transmission with a add on overdrive unit so it’s 3 speed overdrive still uses original jeep fuel tank and also has original jeep heater hooked up and works original milage as far as I’m aware 3455 miles still has original jeep axles has upgraded steering box from Vega which is a upgrade for these cj3bs has aluminum bullet hole wheels has good tires almost like new, new brake/clutch master cylinder unit and newer fresh paint clean South Carolina title fun to drive will trade for rollback or wrecker

https://www.facebook.com/share/1EXzQzuDQm/

[fb_button]
 
To Top

CJ3B Tops Seattle WA. Pickup only

• CATEGORIES: CJ-3B This site contains affiliate links for which I may be compensated.

CJ3B Tops Seattle WA. Pickup only

TJ sent over these CJ-3B Tops

UPDATE 4-26-25

I emailed TJ and he says they are still avaliable,  see update below………..

Both tops are in need of work. The Sears’s top is decent but one of it corners got a little buggered during one of our moves. I think it’s fixable, but will require some work.

Seller’s Description

Hi, I have have two CJ-3B tops to sell.

One I don’t know the origins of, it came w the Willys I bought sight unseen. Photos attached. Second top is a Sears aluminum top, in decent condition but needs work. Both are located in Seattle WA. Pickup only, payment by Venmo only.

Unknown top: $300 OBO

Sears top: $500 OBO

[fb_button]
 
To Top

1953 Willys CJ3B Woodland Park, CO $1,800 (Deleted)

• CATEGORIES: CJ-3B • TAGS: , , , , , This site contains affiliate links for which I may be compensated.

“Andy’s Picks”

CJ3B, project for sure. Again short cut for those in the know.

This posting has been deleted by its author.

The value here is probably in the sum of the parts.

SBC with center dump manifolds sure makes it easier for the exhaust.

Can really see why the louvers are needed in the hood, luckily this is probably underpowered for a V8 swap looks fairly basic.

Has the start of power brakes which something better then stock 9″ will be needed for sure.

Ramsey Winch

Husky Overdrive

Has some neat accessories.

Here is a breakout for folks who may not be 100% familiar with all these parts or what’s going on here.

On a standard no accessories Transfer Case there is a small tin cover on the drivers side, pop that off and this allows for some neat options, and in this case multiple options.

One thing needed is to count the teeth on the gear under that cover, early ones are 26 tooth (26T) later are 29 tooth (29T). So not all parts are equal, buyer beware.

The emergency brake is also off the back of the TC where the rear drive shaft comes out. Fairly standard stuff there.

00Q0Q_gVQtbqF1y31_0CI0t2_1200x900

The SBC will also have a special bell housing adapter and the front bearing retainer on the transmission will be special for a SBC conversion, so you will want to grab all those stuff when your picking SBC adapters, would require a long input shaft as well vs the short 4cyl one. (None of this is shown here)

So as much of a project this one is, there is alot going on to pay attention to, and it could all be in very poor shape, but it looks fairly complete.

00O0O_fabLX1OZzII_0CI0t2_1200x900 00000_fjy5GcSHxCS_0CI0t2_1200x900 00P0P_4o5sC5rA8me_0t20CI_1200x900 00x0x_fv2dSnZ7fFp_0CI0t2_1200x900 00v0v_4sWtqFscBFB_0lM0t2_1200x900

 

[fb_button]