UPDATE: September has arrived; this is only 9 days away!
Just never a week from the FC Jamboree in Lake Mills, Iowa. Dan welcomes all jeep FC’s in ANY condition, running or not!! This year Smoking Joe’s will be providing lunch on Saturday.
UPDATE: September has arrived; this is only 9 days away!
Just never a week from the FC Jamboree in Lake Mills, Iowa. Dan welcomes all jeep FC’s in ANY condition, running or not!! This year Smoking Joe’s will be providing lunch on Saturday.
It’s been a long two months, but the bunkhouse exterior remodel is almost done. In the last week I have finished up the side deck and the front step. Unfortunately, the first time I installed the front step posts I was off by half an inch on one side and an inch on the other. So, I had to dig them up and re-position them. Ugh … anyway, I got everything fixed yesterday.
Yesterday, instead of doing updates, I felt my age as I moved 65 bales of hay in 95 degree heat from the neighbor’s pasture to our place. It proved to be a good workout! We’ll likely buy all of his next batch (last cutting of the year) as well, making us well-stocked for the winter.
Tom Cruze has been a busy body. Here he is checking our the huge nectarines that have emerged (to our surprise). It seems trimming the tree this spring did wonders for both the nectarines and the peaches (also much bigger than last year).
When not climbing, Tom Cruze continues to be “one of the dogs”. Here he is showing the girls how tough he is. He’s also begun accompanying the girls outside to close the gate (a nightly excuse to take the girls for a walk). The first pic is pre-mayhem:


Barry snagged this rare documents off of eBay, then posted it to share with everyone. It’s a great find!
https://www.farmjeep.com/2022/08/22/1953-cj3b-part-list-universal-and-farm-jeep/

This is a rare, unusual “sport jeep” model. It’s priced at $40 with free shipping.
Many thanks to long-time reader Dave Nelson for sending me this rare copy of ‘Jeep’ News. While there is no date stamp that I could find, there is a reference to an April 1946 study in one of the articles; yet, none of the jeeps pictured has the later 2A grille. So, I’m going to guess this is a summer 1946 document.
Also strange is that this wasn’t published out of Toledo. Instead, the mail address is listed as “Jeep” NEWS, Room 700, 305 East 45th South, New York 17, NY.
Finally, also strange, is that a colorized version of this was also produced and it included a reference to the magazine being Vol 1 No 1. If there was a second ‘Jeep’ News made, I have not seen it. My guess is that this was meant to be an advertising piece for dealerships, but it didn’t pan out, so was pulled after one (or a few) issues.
I published this last year

Evan Gillenwater posted the cover of this magazine to Facebook. He seems to think it came from Furgason’s Motors in La Grande, Oregon. The magazine was found at an antique store in New Hampshire.
Here’s the full issue from Dave:
I was surprised to see this ad published as late at September 3, 1954, because it highlights the CJ-3A-based “Farm Jeep” (see halfway down in the ad). It was printed in the Fort Worth Star-Telegram.
This short article (with far too many ads) shows some of the Hy-Rail jeep examples over the years. Thanks to Bill for sharing it.
Glenn spotted this rare and restored Mahl Loader and CJ-2A. There are a ton of detail photos at BaT’s auction page. Note that the serial number used for the title is an engine number and not the original serial number. So, a buyer might want to consider that it your state is extra picky.
https://bringatrailer.com/listing/1948-willys-cj-2a-18/
“This 1948 Willys CJ-2A is powered by a 134ci Go-Devil inline-four paired with a three-speed manual transmission and is fitted with a MAHL Jeep Loader attachment produced by Standard Iron & Wire Works Inc. of Minneapolis, Minnesota. The pair was acquired by the seller around 2010 and subsequently refurbished before installation of the loader in 2016. The truck is finished in black over green vinyl and features white-painted 16″ steel wheels, a fold-flat windshield, a dual-range transfer case, a power take-off unit, a Gre-Sen hydraulic pump, and cab-mounted hydraulic controls. This CJ-2A and Jeep Loader are now offered with an award, articles about the project, and a clean Minnesota title in the name of the seller’s company…..
The factory chassis tag has been replaced with a reproduction unit that shows a blank serial number, and the seller is unable to locate the chassis number on the vehicle itself. The last six digits of the VIN on the title—J172095—are consistent with that of a 1948 Willys CJ-2A.”
Here is a video:
More info on the Mahl Loader from the CJ-2A page: https://www.thecj2apage.com/forums/topic19682_post526669.html#526669
Here’s an article from the Dispatcher Magazine with more info from the auction:


And here are pics:
I’ve not run across a sign quite like this one with the text accompanying the round part of the sign in this way.
View all the information on eBay
“The sign is previously displayed it is made of metal not tin its painted measures 48 in width by 24 in height. I am selling it as shown with no claim of originality. An excellent sign to add to your collection if your looking to own a really unique sign. I am selling this item with no reserve.”
UPDATE: Here’s another one of these postcards on eBay. Starting bid is .99.
(08/04/2020) I don’t know much about Shepherd of the Hills Farm, but I did learn that it was a book from 1907 by Harold Bell Wright that became a tourist destination that then played some role in the rise of Branson, Missouri, as a tourist destination.
View all the information on eBay
“Vintage Postcard of the Farm Tour pulled by an old Army Jeep at Pete’s Cave in Shepherd of the Hills in Branson MO
Size Standard 3 1/2 by 5 1/2
Circa 1960s”