stainless/jewels Research Archives

To Top

1950? CJ-3A? Stainless Milton, WV **SOLD**

June 10, 2010 • CATEGORIES: CJ-3A, stainless/jewels • TAGS: . This site contains affiliate links for which I may be compensated.
1

UPDATE: **SOLD** Was $3500.

It’s unclear exactly what the foundation for this jeep is, but the body is definitely stainless.  The soft top is unusual too; note the buttons up the side.

“NEW CJ3A BODY…STAINLESS STEEL!!!!!!!!!!!… MOUNTED ON NEW FRAME, WITH NEW HD TOP AND SIDE CURTAINS. 1978 CJ AMC 20 LIMITED SLIP REAR, 3:54 GEARS, DANA 30 FRONT, L/O HUBS, LARGE ROTORS. STEERING HOOKED UP. THIS BODY IS 9 INCHES LONGER THAN A STOCK CJ3A. NEVER HAD AN ENGINE OR TRANNY HOOKED UP. BETTER DEAL THAN A NEW STEEL BODY, IT’S STAINLESS, WON’T RUST! PLUS YOU GET A FRAME AND TOP FREE! 31-10;50 TIRES. NO TITLE (NEW KIT)”

[fb_button]
 
To Top

1947 Stainless Flattie Oakland, TN **SOLD**

April 19, 2010 • CATEGORIES: CJ-2A, stainless/jewels • TAGS: . This site contains affiliate links for which I may be compensated.
0

UPDATE: **SOLD** Was on eBay.

“This is a very rare WWII 1947 Willys. I put jeep in the title for locating purposes only. IT IS NOT A JEEP MANUFACTURED VEHICLE. It is a 1947 WWII willys, with original engine and drivetrain. The body was hand built by skilled craftsmen in 1974 in the philippine islands. It has a complete stainless steel body. The engine was rebuilt about 3-4 years ago by an ASE certified mechanic. It runs and drives like new and has no problems that I am aware of. It has been used mostly in shrine parades and ridding the grandchildren around on the farm. It has been stored in a climate controlled shop most of its life. It naturally has no rust anywhere on it. The tires are very old and do have signs of dry rot, but have excellent tread and if not going on a long trip, should be fine for several more years. I have heard that several were built in the 70’s, but I wouldn’t think that very many are still around. The vehicle comes with a full enclosure and as far as I can tell all the snaps and attachments are in good working order. The vehicle has never been wrecked or disassembled whatsoever. The miles showing on the speedometer are true and correct. There are no dents that I have seen at all. There are some very lite wear scratches in the stainless body from getting in and out or wiping dust off without the proper cloth. Again these are very lite and would probably not be noticed, but I did want to mention them.”

[fb_button]
 
To Top

Stainless Half Doors Woodland, Wa $200

January 31, 2010 • CATEGORIES: Parts, stainless/jewels This site contains affiliate links for which I may be compensated.
0

These are the first stainless 1/2 doors I’ve seen.

“WILLYS JEEP JEWELS STAINLESS HALF DOORS MADE TO CUSTOM FIT ALL FLATFENDER JEEPS CJ 3B , 3A , 2 A , AND MAYBE OTHERS . VERY HARD TO FIND !!! $ 200.00 call 360-957-6012 Woodland Wa .”

http://portland.craigslist.org/clk/pts/1579920159.html

[fb_button]
 
To Top

Stainless Jerry Can, Fort Mill, SC **SOLD**

December 15, 2009 • CATEGORIES: Parts, stainless/jewels This site contains affiliate links for which I may be compensated.
2

UPDATE:  **SOLD** Was on eBay.

Johnny spotted this 5 gallon can and a 2.5 gallon can on Amazon.

Steve spotted this unique item.  For reasons unclear, probably related to California statues, the seller cannot ship this to California.

“Sooner or later you’ll have a need to carry quantities of fluids beyond the contents of your coffee cup. Do it right with this stylish 5-gallon stainless steel jerry can, polished to a mirror finish. This heavy-duty can comes complete with a flexible 10in. x 3/4in. filtered spout. A screw vent valve lets you dispense fluids without glugging. The recessed bottom provides an easy, solid grip when pouring. Comfortable top grip for carrying. 14in.W x 7in.D x 18 3/4in.H. *Unable to ship this item to California.”

stainless_steel_gas_can

[fb_button]
 
To Top

1951 CJ-3A Stainless Steel Bellevue, Wa $9,500

December 9, 2009 • CATEGORIES: CJ-3A, stainless/jewels • TAGS: , , . This site contains affiliate links for which I may be compensated.
2

UPDATE:  still available.

(10/01/09) Here’s a stainless jeep from Seattle’s Eastside.  I gotta say, that back seat might be the most comfortable looking back seat I’ve ever seen in the back of a jeep.

“1951 willy jeep all stainless steel not to many made like this very rare only a few was built this jeep is in perfect condition runs drive perfect a very expensive jeep its worth $20,000 is a buty must see in person I have the title and everything dont want to explain to much so call for $12,500 all questions 425-285-8012”

http://seattle.craigslist.org/see/cto/1466139255.html

1951_cj3a_stainless_bellevue1

1951_cj3a_stainless_bellevue2

Continue reading →

[fb_button]
 
To Top

Jewels Stainless Steel Tailgate Seattle, Wa $300

November 13, 2009 • CATEGORIES: stainless/jewels This site contains affiliate links for which I may be compensated.
8

This is for sale by Steve, as close to a brother as I had growing up, who grew up in the back of his jeep (Otis) while I grew up in the back of mine.

“I have a Best Jewels SS tailgate super rare.  It has a small dent on top tube but could be easily repaired.  206 890 6233 call with questions.”

http://seattle.craigslist.org/see/pts/1464094723.html

stainless_steel_tailgale_steve

[fb_button]
 
To Top

Stainless Steel Flattie Winston, OR **SOLD**

September 21, 2009 • CATEGORIES: CJ-3A, Features, stainless/jewels, Unusual • TAGS: . This site contains affiliate links for which I may be compensated.
0

stainless_flattie_winstonUPDATE: **SOLD** Was $8000

(08/21/09) It appears the suspension is customized as well.

“Stainless Steel Body (Body cost 6000.00) 350/350hp 4 bolt with 350 trans with extra clutches. Assembled with Advanced Adapters parts. Less than 1000 miles on engine and trans. Aluminum custom built radiator. Over 17,000.00 invested.”

 

[fb_button]
 
To Top

Stainless Steel CJ-3A Milton, WV **SOLD**

June 4, 2009 • CATEGORIES: CJ-3A, stainless/jewels This site contains affiliate links for which I may be compensated.
2

stainless_steel_jeep_miltonUPDATE: **SOLD** Was $4500.

“This is a new jeep tub kit, all stainless, on a new frame, with a new top, it has 1978 CJ front and rear axles under it, no motor or tranny has ever been in it. The whole jeep is priced not much more than a plain steel bodykit alone. If you like flat fendered jeeps this is something special!!!!!!!!!”

[fb_button]