UPDATE: **SOLD** Was $3200.
“1961 Willy’s truck, 6 cylinder, clean title,does not run, no seat, hubs lock ”
========================
UPDATE: **SOLD** Was $3200.
“1961 Willy’s truck, 6 cylinder, clean title,does not run, no seat, hubs lock ”
========================
Here’s a unique fiberglass Flatfender replica out of South Africa from GP Team. The dash is particularly unique. Apparently, these are in the experimental stage. The bodies will be available with an MB or a CJ style grille.
https://www.teamgp.co.za/p/697928/fibreglass-replacement-bodies

UPDATE: **SOLD** Was R3,500.
This body, branded a “Badger”, looks to be the same body style as the GP Team’s body. The branding was place on the hood, tailgate, and windshield. The Badger appears designed for the VW chassis, while the GP Team body looks designs for a standard Willys chassis.
It suggests to me that GP Team may have bought out the Badger company and removed the Badger brand in favor of Willys.

Here’s an example of oak complete Badger body, which may be designed as a VW body type.
This two-page Ramsey Winch brochure is dated 1959, but given there’s a wagoner on the front, it’s likely front 1963 or later. Still, it’s got some neat illustrations about how to winch.
UPDATE: Still Available.
(03/02/2019) Seller notes this has the original suspension. The problem is that this lacks any leaf springs . . .
https://www.facebook.com/marketplace/item/2162432397149997/
“4 cil 4×4 Munual of 3 changes It only runs a speed up to 40 Original suspension Arizona title Ready to go!’
Tom’s selling his nice looking CJ-5. For more info, contact him at thjones36@gmail.com.
https://youngstown.craigslist.org/cto/6939918438.html
“A 1967 Jeep CJ5. Bought this as a basket case and took it down to the frame. Frame and axles were cleaned and painted with POR15. Axles drained, cleaned out and refilled. Transmission is rebuilt by Herm-the-Overdrive guy. Brake lines all new and professionally installed, all new brake components. Rims cleaned and powder coated with new all-terrain tires installed.
Tub was removed cleaned and painted with year correct paint, undercoated with an asphalt sealer. New gas tank and lines installed, carburetor rebuilt. The entire electrical system is all new. Re-built Dauntless V6 installed, however compression is a little lower than it should be. Runs well but needs tweaked to get it running better. New exhaust system, new alternator, new gauges, new windshield, new Smittybuilt XRC 9.5K winch on an aftermarket bumper and new seats.
Like most of these will need a little tinkering to bring it up to it’s full potential but all the hard, and expensive stuff has been done. I have extra parts and an extra engine (that needs rebuilt) to go with it. Clear title. Have over $14.000 into it at this point but just don’t have the time to keep up with it and drive it. I’m probably forgetting lots of other things I’ve done and installed but you get the idea.
Hope to find it a good home. I’ve had a blast with it.
Can help with delivery if within 200 miles.”
UPDATE **SOLD** Was $5500.
There’s an odd hole in the windshield frame.
“RUST FREE SOLID AZ NATIVE. RUNS AND DRIVES . ALL ORIGINAL EXCEPT 1953 MOTOR.”
It runs.
https://lakeland.craigslist.org/atq/d/lakeland-1946-willys-jeep/6936428033.html
“Original motor running gear motor runs good body has some rust but not bad…4wd works great will climb over or through just about anything you put to the test…you can own a piece of history with this jeep i’m asking 2500 obo please message me if ur interested or have possible trade”
Lots of updates to this crawler.
https://www.facebook.com/marketplace/item/364176144495654/
“1948 willys jeep Motor. (sbc)
Trans. sm465
T-case. Dana 20
Front. Dana 44 j10 high steer lock right
Rear Dana 44 j10 welded
Full cage to frame
Racing seats
Like new 36×12.5xR15 tsl super swamper
Winch not included”