To Top

1947 CJ-2A Redding, CA **SOLD**

• CATEGORIES: CJ-2A • TAGS: , , , This site contains affiliate links for which I may be compensated.

UPDATE **SOLD** Was $15,000

This is a beautiful build, but the price will scare a lot of buyers away.   A tilt front flattie is certainly rare enough to warrant posting.

“1947 CJ2A Willys:  Engine – 302 V8, New Edelbrock Carb, Edelbrock intake manifold, New Starter, water pump, one wire Alt, motor mounts, remote oil filter, All new gaskets, oil pan valve cover, front, rear main seals, new flex fan, 3 core radiator, rad hose’s. Transmission – NP435 Four speed with deep granny 6:98 tol, new bearings, seals, sincros and mainshaft, rebuilt with Advance Adapters kit to marry to Dana 18, also rebuilt with new seals, bearings and gaskets.  Front & Rear ends – Model 23 front-41 rear, rebuilt with new seals, bearings, gaskets 4 wheel full size disc brakes, new rotors, calipers, pads, hardware, front axle equipped with ATV manual hubs.”

[fb_button]
 
To Top

Builds: Jim hunts for an MB

• CATEGORIES: Builds • TAGS: This site contains affiliate links for which I may be compensated.

misc-491Here’s another great purchase adventure from Jim.  Thanks Jim!

Jim writes, “Another flat fender adventure but this time with a happy ending (not that kind of happy ending).

The guy on the phone said, “its a WWII Willys MB, great shape, original, runs and drives etc $3000”. So, I drive 6 hours west to Flagstaff and pick up a buddy of mine, then turn around and head back the way I came to find this elusive rig.

misc-492We travel many miles east to Winslow, then the “fun” started as we began to follow what turned out to be a nightmare set of directions. Turn at the end of the pavement, follow the mining road, take the left side of the wagon trail over miles and miles of beat-your-truck-to-death-washboard, dust-covered, filthy, silty, rocky, brutal, teeth grinding, two-track trail for two straight hours! Good thing I had my truck washed and waxed the day before.

We get there, see the jeep and man am I unhappy in the middle of nowhere. It is bad, horrible, mismatched wheels, fat, flat, rotten tires, high back bucket seats, roll bar, filled with junk, a butchered windshield frame, and obviously not driven for years. Nowhere near a $3K MB.

misc-493I looked at the poor guy, surrounded by his huge collection of junk and said no offense pal but that’s a pile of parts shaped like a jeep worth maybe $500 and I’m not too happy you got me all the way out here for this mess.

He said well, I need the money and if that’s what its worth, hand me $500 and here’s the title. Um, well, that pretty much killed my next argument and shut me up.

After throwing away the seats and roll bar, filling a huge trash can with junk, garbage, pounds of dirt, alternators, a radiator, various parts of other cars and rat nests I started looking closer.

misc-494It has the right engine, though 12 volt, right trans, right axles, a super straight nose and dash, a decent tub, mmm…. I check my parts pile and find some correct seat frames, a gas tank, a perfect windshield frame (all from a Durango yard sale for $100) and even managed to come up with 4 civilian 16″ wheels with rollers so I could remove the fat, flat rubber and mismatched spoke wheels.

With a fresh battery we found it would turn over but not start, though it had good spark. Turns out a pack rat had been using the carb as a toilet! There was literally 2 inches of rat shit in the carb! We yanked a good carb off a CJ3A, bolted it up, hit the starter and what do you know, the motor not only ran but sounded great with 50+psi oil pressure. All of the sudden it looked like an MB, with the yard sale parts, skinny tires and wheels, you could start to see the past, faded olive drab ghost of its military history.

I think this is going to be fun, maybe build an SAS desert MB replica loaded with period correct gear and painted desert tan? What to do, what to do….

misc-495

[fb_button]
 
To Top

Various Early Jeeps Arvada, Co **SOLD**

• CATEGORIES: CJ-2A, GPW (Ford MB), M-170, M-38, MB • TAGS: This site contains affiliate links for which I may be compensated.

1945_mb_arvadaUPDATE: **SOLD**All the stuff must go (probably in violation of a county ordinance or something)

  1. 1945 Willys MB jeep (NAVY?) – Flat head four 134 cid. engine, T-90 tranny, it has a tailgate cut in but the panel is still there.
  2. 42 Ford GTB
  3. 42 Willys MB
  4. 42 Willys script body tub
  5. 42 Ford script GPW
  6. 47 CJ2A
  7. 2) 48 Willys jeep pickups
  8. 52 Willys M-38
  9. 54 Willys M-170
  10. 60 Willys utility wagon
  11. 3.5) 61AMC mighty mites
  12. 62 Willys FC-150
  13. 2) 71 jeepsters
  14. trailers and miscellanous jeep parts.”

 

[fb_button]
 
To Top

1950 CJ-3A Mt. Vernon, IL **SOLD**

• CATEGORIES: CJ-3A This site contains affiliate links for which I may be compensated.

1950_cj3a_mtvernonUPDATE: **SOLD** Was $7900

This looks very nice.

“Frame off restored 10 years ago,very nice condition, runs and drives good,b”

 

[fb_button]
 
To Top

1946/1966 flattie Berlin Heights, Oh $5600

• CATEGORIES: CJ-2A • TAGS: This site contains affiliate links for which I may be compensated.

1946_1966_cj2a_berlinheightsThe builder put a good collection of parts together for this flattie.

“1966 custom Willys jeep, with 1946 body./body off restored / 350 chevy v8 motor with avenger holly carb/ munci 465 trans/ dana300 transfer case/ dana 44 rear end/ dana 30 with disc brakes front end/ 33″ like new thornbird tires/ power steering/ only thing it needs is for the brakes to be pressure bled. $5600 call Mike at 440-225-2421”

zhttp://cleveland.craigslist.org/cto/1221689569.html

[fb_button]
 
To Top

1950 CJ-3A Glencoe, Al **SOLD**

• CATEGORIES: CJ-3A This site contains affiliate links for which I may be compensated.

1950_cj3a_glencoeUPDATE: **SOLD** Was $1000

This is a project, but it’s hard to tell how much ‘project’ is left to do.

“1950 Jeep CJ-3B Willis.  All metal in good condition, 4 cylinder L-134, 3 speed transmission, needs windshield and engine rebuilt, great project vehicle. $1,000”

 

[fb_button]
 
To Top

1946 Lefty CJ-2A Portage, Wi **SOLD**

• CATEGORIES: CJ-2A • TAGS: This site contains affiliate links for which I may be compensated.

1946_cj2a_portageUPDATE: **SOLD** Was $2000

“I bought this about 15 years ago and it has been a blast. I have a large farm and we used it to cruise around here and taught my kids how to drive on it. It runs excellant and has the original Hurricane 4 cyl. Red Devil engine with a 3 spd. Trans. The tires are great, but as you can see they are not original equip. Recently installed entire brake system. We would use this to ride around at hunting season and the occassional trip down to the local watering hole. It has been great to us and has always started and never left us stranded. It truly is a great piece of history that would make an excellant canidate for restoration or use as is. We have had our fun with it but just don’t use it much anymore so it is time for it to go to a new owner.”

[fb_button]
 
To Top

1948 CJ-2A Denton, TX **SOLD**

• CATEGORIES: CJ-2A • TAGS: This site contains affiliate links for which I may be compensated.

1948_cj2a_dentonUPDATE: **SOLD** Was $1850

“great jeep mechanically……cosmeticly challanged……… runs and drives and stops! no smoke or grinds etc. was fully rebuilt as a hunting rig about 8000 miles ago ….springs,engine, tranny ,transfer,etc…..and thats about 15 years. kept outside. pretty solid body,orig seats speedo and gauges work .2 new tires original type wheels. wrong steering wheel. brand new starter and carb work done. the old jeep is about farm ready today”

[fb_button]
 
To Top

1959 CJ-3B Three Rivers, MI **SOLD**

• CATEGORIES: CJ-3B This site contains affiliate links for which I may be compensated.

1959_cj3b_threerivers

UPDATE: Was $5600. **SOLD**

“I’m moving in a couple of months and am looking to sell my 1959 Willy’s Jeep, model CJ3B. Rust free, with a four inch lift, new Ground Hawg 6 ply tires (14/35/15). The engine is a 231 Buick V6 with Heddman Headers. The Jeep comes with a vinyl top and original seat frames that have been re-upholstered, the tool box is also in excellent shape.”

[fb_button]