This looks in pretty good shape.
https://winstonsalem.craigslist.org/cto/d/clemmons-1953-jeep-cj3b/7188776303.html
“53 Flat Fender
Rewired, converted to 12 volt
New high torque starter
Solex carburetor
Turn signals added
Beechwood canvas seats”
This looks in pretty good shape.
https://winstonsalem.craigslist.org/cto/d/clemmons-1953-jeep-cj3b/7188776303.html
“53 Flat Fender
Rewired, converted to 12 volt
New high torque starter
Solex carburetor
Turn signals added
Beechwood canvas seats”
This has some parts value, especially given the slot rims.
https://lynchburg.craigslist.org/bar/d/gretna-1955-or-1956-willys-jeep/7191534773.html
“The Jeep seems to be complete but needs restoration two-speed transfer case and engine turns over is 6 volt positive gound call with any questions 1200.00 obo thanks for looking. No title”
UPDATE: **SOLD** Was $1000.
Looks like this one has been sitting in someone’s garage for a while.
“Warn Overdrive, 26 tooth 6 spline. New condition not a rebuilt unit, This was in a project Jeep I purchased that was never completed to run. Overdrive was mounted but never used, new condition but is many years old. Includes Overdrive, new gasket and seal set, new install lock and keeper set, shifter with floor plate and instructions. SOLD AS IS, buyer to be sure of correct application, $1000 cash only no checks, no trades.”
UPDATE Still Available.
(05/01/2020) There could be some parts value here.
https://washingtondc.craigslist.org/nva/pts/d/alexandria-willys-cj-2a-industrial/7199435664.html
“Complete Willys CJ-2A 4 cylinder flat head engine with all accessories and governor. This item sat in a shed for about 25 years and has been covered by a tarp for a couple of years after going out of service for fuel tank reasons. Item is stuck from sitting and is still attached to the arc welder it powered and on the trailer it is transported on. Sold as is. $300.00.”
UPDATE: **SOLD** Was $900
(05/07/2020) Probably a DJ-3A body on a CJ-3A chassis, but not enough pics to confirm it. This has the CJ-5 version of the hardtop with the rear windows. It is also an early version with the small rear window.
“I have up for sale a cj3 or its a dj3. Not sure.”
UPDATE: Price dropped to $6500.
(01/30/2020) Includes a variety of parts. Still some work to be done.
https://inlandempire.craigslist.org/pts/d/perris-1948-jeep-willys-overland-cj2a/7193043582.html
“1948 Jeep Willys Overland CJ2A 4wd Off the frame restoration, most of the hard work is done and looking for someone to complete the project!! Clean pink slip and CA plates Original Body and Frame Service manual and parts books 12v system, mag rims with tires 2 new bumpers Tons of original parts and new parts including: Tow bar, exhaust system, power winch, ooooga horn, halogen lights, extra gas tanks, rack, too many parts to list all included with deal.”
UPDATE: Still Available.
(06/25/2020) This is a later model CJ-3B with no engine installed and lots of body rot.
UPDATE: Still Available.
(08/19/2020) Seller is parting out these CJ-2As.
https://www.facebook.com/marketplace/item/911271876028185/
“CJ2A parts. Parting out a couple of CJ2As Transmissions, transfer cases, engines, axles, frames. Shoot me a message with what you are looking for. Some body parts as well. Rims, Windshields, seats, gauges, grills”
This June 1951 Salesbuilder Magazine was volume 3, number 6. This issue includes a three page look at the Farm Jeep and Jeep Tractor vehicles and the Jeep-branded farm equipment. A large number of 1951 wagon-related advertising pieces are shown on the first few pages.
There’s also a number of Laurel C. Worman dealership photos, include pics of his Willys wagons on the front page and examples of his wagons stenciled with “Welcome Wagon” on the back page. Finally, thanks go to Barry Thomas for helping me snag this issue.
There’s no pic of the back of this press photo nor any credit for the agency/company that shot it. It appears to have dealer plates. Free shipping and the seller will consider offers.
Glenn’s selling this CJ-2A.
https://boston.craigslist.org/sob/grd/d/smithfield-willys-jeep-od-restored/7193270314.html
“A nicely restored 1947 CJ2A First Edition Willys Jeep. Done 15 years ago with a new body, Frame blasted / painted, absolutely no rust, all stock drive train fully rebuilt, modern Overdrive, 5 NDT Military tires, Full soft top/bows included but not installed. This Jeep is licensed, insured ready for you come drive. That O/D makes a real difference. Every nut and bolt was turned in the restoration, still 6 Volt, quiet in all gears, doesn’t leak oil, stops like it should, and even the Emergency Brake works. If you want a nice appearing and operating Flat Fender Jeep, work like a tractor, check it out. Only trades considered would be driver quality STOCK preferably Willys, Kaiser, Farm Tractor / Loader or AMC Nash. Email for contact info to discuss.”
Mark shared this GPW listed at warjeeps.com.
http://www.warjeeps.com/mjs/sale20/adm170/adm170.html
“It has “All Matching” serial numbers, (approximately only 1% of collectible WWII Jeeps have all matching serial numbers). The serial number 141204 is located on the frame. The engine and the data plate found on the tub. Mfg. at the Louisville, KY plant the summer of 1943 and delivered to the U.S. Government on September, 1st 1943. The original WWII engine, frame and WWII tub are all Ford manufactured. Later in 1943 the Jeep tubs (both Ford and Willy’s) were outsourced to AMC (American Motor Company) making this tub one of the very last GPWs issued with a genuine Ford built tub!
Continue reading