I bought this brochure off of eBay. I don’t remember seeing this version of a jeep camper brochure. The seller has one more for sale.
Features Research Archives
Qualls Road Trip IV: Team Qualls Makes it Home
See Part III | Start at Part I
This is the final summary from Randy and Carson’s coast-to-coast drive. Thanks to both of them for the inspirational journey and for sharing your photos along the way.
Here’s Randy’s summary of the trip:
“We made it? 18 days and 7055 miles coast to coast and back in two 1951 open Willys jeeps. Average speed 48 mph Why? I don’t know, but it was fun! Sometime I’ll make a slideshow and post it. Thanks Melvin Petiet and Molly from Happy Trails 4×4 in Jacksonville for storing our tow rig while we were gone. They were also overlanding but we didn’t manage to cross paths. We did hook up with Cartotracks, warn, and Factor 55 for a run in Sand Hollow, and Boston Bob put us up for a night in Delta Colorado. Also thanks David Eilers for a great site ewillys.com.”
Jeep Plane Illustration
Posted on Facebook by both Mario and Roberto, this WWII illustration pokes fun at the jeep for not making a good plane.
Somewhere on eWillys I had relayed the story I was told about an ex-WWII military mechanic who claimed that a few jeeps were tested as gliders in hopes they could be used to fly across the English Channel. While the experiment barely worked in the Southwest desert, it proved impractical over the channel due to the additional moisture in the air. I have so far been unable to verify these claims.
Narrow-Bodied Fiberglass Racer Sacramento, CA $8500
This single seater former mud racer has a variety of mods.
https://www.facebook.com/marketplace/item/528018095354935
“340 Buick emotor with a muncie 4 speed. Willys jeep not a Cherokee but has 460 rear ended gears and 540 front gear, mud racer. It runs and drives”
1951 Unrestored CJ-3A W/ A lot of Fixin’s Auction Oct 14-15
Thanks to John for sharing this one-of-a-kind low-mileage jeep: 1731 miles … just stop what you are doing and check out these pics! Sadly, no engine pics are included. This jeep will be auctioned October 14-15th. Thought it is listed as a 1952 model, the serial number puts this as a 1951 model.
Some of the implements are unused!
https://www.broadarrowauctions.com/vehicles/tj22_124/1952-willys-cj-3a-jeep

“Chassis No. 451GB117583
This four-wheel-drive CJ-3A Jeep was ordered in January 1951 from Wiley Brothers and Lewis Packard-Willys of West Chester, Pennsylvania, by Arthur Knorr. A producer of Milton Berle’s Texaco Star Theater and the Miss US and Miss Universe pageants, Mr. Knorr would occasionally escape to his wife Ruth Gray’s family home on Halfmoon Valley Road near State College, Pennsylvania. The Jeep was ordered to support any and all possible maintenance needs on the Pennsylvania property. Accordingly it was outfitted with all the options, including a Ramsey cable winch, both front and rear tops with side curtains, floor mats, a hood lock, a radiator cover, and a heater/defroster – but also a dump trailer, power take-offs in front and rear, a pulley drive, and a hydraulic implement lift, running attachments that included a Timken buzz saw, grass cutter, ‘bush and bog harrow’, and hydraulic 6-foot snow plow!
Free-Lock Hub Instructions Dualmatic/Selectro Design

Later model Dualmatic-style-Free-Lock hubs. The name was originally part of the Free-Lock Hub Corporation
Ann’s longtime friend invited me to look at a jeep yesterday that they just inherited from her uncle. They were confused about the model, so hoped I could identify it.
From the front, the jeep was clearly an early M-38A1 (turned out to be a 1953), with the hinged grille and early fenders. The dash was also correct, the correct large hole fuel inlet, and it had the early M-38A1 cowl with screws. However, it also had a tail gate that didn’t appear added. The body itself was in great shape, yet the body wasn’t mounted using all the holes, in fact some holes were missing. The cowl also lacked both the “JEEP” stamps along the side of the cowl AND the passenger side indent common for M-38A1 bodies.
Thankfully, the uncle had kept receipts, one of which was an invoice for a replacement body. Aha, that’s why it did not have JEEP or WILLYs stamped anywhere.
But, more interesting to me than the jeep, was that another document they had was an original set of instructions for Free-Lock hubs (more on Free-Lock Hubs), the style that looks just like the Dualmatic hubs. This is the first time I’ve been able to document that at some point Free Lock branded hubs were made exactly the same as Dualmatic hubs.
As you can see in the two images below, we have basically the same set of instructions for both hubs, with one that is labeled Free-Lock and the other Dualmatic. The Dualmatic is dated “8-28-74”, which the Free-Lock has hand written instructions, which I believe indicates the Free-Lock hub instructions were from an earlier date.
Free-Lock document:
Dualmatic document:
These two pics show a few more details, including that there are two sets of screws on opposite sides of the hub.
1940s? Willys Overland Watch $155 on eBay
Maury shared this pretty rare Willys-Overland watch. Base don the design, I’d guess this is from the late 1940s. The seller describes this as a “dash clock”. He does listed other models of watches that look to be “dash clocks”, but to me this looks more like a pocket watch. Anyone know more about this item?
View all the information on eBay
“Up for auction is this vintage Willys automobile dash mounting clock. It is in great working condition! Wind up mechanism. I do not have the mounting bracket.
Measures 2 1/4″. Selling as shown”
Ceramic Willys Wagon Model on eBay $17.99
I’ve never seen one of these. Is it a vintage item or was it produced more recently?
View all the information on eBay


Added Walkways to the Property
As part of the continuing updates to our property, we’ve added some additional walkways. These serve three purposes. 1) We found that lots of dirt was being tracked into the bunkhouse, so that needed to be addressed; 2) the bunkhouse felt separate from the rest of the buildings and 3) we expect to replace the lean-to ‘barn’ to be replaced with an actual barn, so these walkways will help link everything together. So, we hoped extending the walkway would help incorporate the buildings.
This is one of the few tasks that we decided to hire a contractor to complete. Unfortunately, our calls to local contractors proved frustrating. We couldn’t get local folks to respond. Finally, Ann reached out to Wine Country Landscaping in Milton-Freewater, about an hour away. They gave us a free estimate and had great reviews. It’s a young company, but they are eager to grow, easy to work with, and did a great job. In fact, the guys repaired some concrete for free just to make everything look better, something they were not required to do.
At this rate, I see no reason we can’t hold some kind of jeep event next year. I’ll announce something by January.
Here are some pre-concrete photos. This first one shows the gravel in front of the shop, an annoyance when moving something with smaller wheels from the concrete to the asphalt. To the right of the shop is a form for the new propane tank pad.



After: The concrete now runs the northern side of the shop. The white building in back is a series of lean-tos that are super inefficient space wise. We will repurpose the lean-to materials in to a hay barn and shelter for the cows and a barn will replace the existing structure. To the right is the guesthouse.
Another Willys Electric Light Plant
A reader shared a rare look at a Willys Electric Light Plant, including the sleeves during cranking. In the pic below, the Willys Electric Light Plant is on the left and a rare Alamo (electric light plant?) is on the right.

Here is a video of the sleeve functioning:
Some more pics:



















