emailNeed to contact me and don't have my email? Click on email button.
Welcome to eWillys.com, a website for vintage jeep enthusiasts. I update this website nearly every day with jeep deals, jeep history, interesting reader projects, jeep related info, and more.
These quick searches can help you find things on eBay. People list in the wrong categories all the time, so don't be surprised to see brochures in the parts area for example. This section used to be split into jeeps, parts and other categories, but recent changes to eBay will require this information to be recoded.
The links to posts below show jeeps grouped by models, condition, and other ways. Some of these jeeps are for sale and others have been sold. If you are unsure whether a vehicle is still for sale or not, email me at d [at] ewillys.com for more info.
There are plenty of interesting, unusual, historic and surprising stories related to Jeeps and their owners. In addition, some of these features have nothing to do with jeeps. This link will display all featured stories starting from the latest.
Looking for parts and not sure where to go? There are a variety of large and small new and used parts sellers both online and offline.
Importantly, the allure of buying a project jeep can be romantic. The reality of restoring a jeep can be quite different, expensive and overwhelming without the right tools and resources. So, tread carefully when purchasing a "project". If you have any concerns about buying a vintage jeep, or run across a scam, feel free to contact me for help, comments or concerns .
1950 Willys Jeepster F134 Engine Trans w-OD $600 Hampstead, MD
Looks like some parts went into this one back in the day it must have been quite the F134 running around. I can picture this in a Shriners Jeepster! Engine, trans, OD it’s a good deal for sure here!
Information from seller:
Hurricane F 134 4cyl including bell housing and transmission w/ overdrive. No known history. Used in jeeps from 1950-1971
https://www.facebook.com/share/1BcGX8TixF/
Willys Jeep F134 Engine with extras $1,000 Frackville, PA
Another nice set up here, lots to go along with the Engine, Trans, TC, and PTO! Was listed a while back so you would need to check if this is still available.
Information from seller:
Willys jeep F134 4 cyl.motor complete also d18 transfer case and t90 3 speed transmission. Also Koeing pto model 51,,,this is a complete assembled unit which ran and worked good when pulled from a rusted out jeep cj5,asking 1000.00 for all complete..also have other willys jeep cj5 parts let me know if you need something.
https://www.facebook.com/share/19XmeMc3wE/
1956 Willy’s Jeep Panel Full Set of Original Seats $650 Hanover, PA
Little high for me on the price due to the condition shown, and I’m more in the camp of Yes they need recovering! But they are available if you need a set and don’t want to travel and may need these for your project.
Information from seller:
Original metal seats in very good shape. Could use recovering.
https://www.facebook.com/share/14DPeEEbihW/
Willys Jeep Hard Top CJ2A CJ3A CJ3B CJ5 M38 M38A1 $500 Millington, MD
Hard top, feel free to update what you see here with some comments. Still a ways off from learning about these Hard Tops.
Information from seller:
Top only. Aluminum hardtop complete with doors. All glass intact. Needs minor repairs but keeps the rain and snow out These buff to a nice shine. It came on an M38A1. I moved it over to a 65 CJ5 but I think it was made for an earlier model? CJ2A CJ3A CJ3B CJ5 M38 M38A1. 500 obo or trade for jeep and scout stuff.
https://www.facebook.com/share/16VMxobbBq/
Pabst Estate FC-Jeep Auction Summary
6/25/2025 was the close out of a large collection of FC’s and some other unrelated Willys parts. Here is a quick summary of those results.
Original Post and there are separate posts with all the pictures you can click on the photos here to take you to those individual pages.
LOT 107: Price Realized $7500
LOT108: Price Realized $550.
LOT110: Price Realized $525
LOT111: Price Realized $625
LOT112: Price Realized $3550
LOT 113: Price Realized $4900
LOT114: Price Realized $2300
LOT115: Price Realized $650
LOT116: Price Realized $3950
LOT117: Price Realized $4350
LOT118: Price Realized $775
LOT118a: Price Realized $2600
LOT118b: Price Realized $190
LOT118c: Price Realized $50
Set of seats no shown. Looks like I missed these at some point. Was a set of front seats for FC.
LOT118d: Price Realized $370
LOT151: Price Realized $160
LOT152: Price Realized $310
1948 Willys Jeep Top $75 Fargo, ND
No description but neat Jeep in the photo with a rear PTO.
Information from seller:
https://www.facebook.com/share/16uKaZauo2/
T90A D18 $500 Excelsior, MN
Another might be worth a look, 4CYL input shaft.
Information from seller:
Removed from a 1946 CJ2A, Jeep shifted well when removed, stored indoors for the last 20 years. May also fit some Scouts, do your research
https://www.facebook.com/share/1EuQD6gUmY/
1961 Willys 226 Super Hurricane $125 Mills, WY
226 might be able to deal and wheel here, some good bits maybe.
Information from seller:
Make offer, seeing if anyone needs before going to scrap, block seems good no oil pan missing head would make good core to build
https://www.facebook.com/share/1EERhNxpGu/
1959 Willys T-90 and D18 $800 Johnstown, CO
Might be a good pick up for someone.
Information from seller:
This is a good T-90 transmission and T-18 transfer case. Included is a Dualmatic overdrive gear. The entire unit is in very good condition. It could use new gaskets. The Dualmatic overdrive is a Warn knockoff. Included is a aftermarket shifter with back-up switch for back-up lights. Calls are best- nine seven 0- 2 one five- 9 four six nine. Will not respond to is it available. If it’s listed it is available. I do not answer messages every 5 min. Call me – thanks Michael
https://www.facebook.com/share/1FpDyJkLDf/
1949 Willys Jeepster Parts and More Welland, ON
There are a bunch of Jeepster and Willys Parts on a few listings, so if you need something maybe reach out and see what’s up.
1949 Willys Jeepster Rear Axle CA$200 Welland, ON
Posted as a Dana 23 out of a Jeepster, 4.88’s (39/8) which typically match up to the 226 it looks to have had in it so might be some R/P parts here, used gear sets can be tricky to set up, but axles look to be there, some backplates. Most used axles I have picked up are in this price range or slightly lower so its not priced way out there either.
Information from seller:
Axle came out of a 1949 Willys Jeepster, both sides spin freely. Dana 23 I believe. 39/8 tag reads. Have not taken cover off. Pick Up ONLY
https://www.facebook.com/share/1FqG5NssML/
Willys 1949 Jeepster Original Radio CA$1,700 / USD$1200
Information from seller:
When I bought my Jeepster this came with it, I did not install, did test it and light came on and all dials work. 6v, Guy said it was rebuilt. Comes with the Jeepster correct dash cover. Thats all I can tell you. Pick up In Canada 40 mins from Niagara Falls NY boarder/ Fort Erie boarder. Will ship with exact purchase price and Ins. for customs. $1200.00 US or $1700.00 CAD
https://www.facebook.com/share/14Hibop1RTx/
Jeep/Willys T-90 Transmission Case Housing CA$1
Information from seller:
Willys/Jeep T-90 transmission case, no chip/cracks, all screw hole threads intact. Take your pick. These have the screw holes for the oil slinger. All so have internal used parts. US funds paypal AS IS I can ship might be a little heavy on shipping cost.
https://www.facebook.com/share/1EUjuBgNYN/
Willys wagon rear license plate assembly CA$80
Information from seller:
Willys wagon rear license plate assembly, basical all there needs attention. $80.00 plus shipping from Welland Ont. I added LED light on inside to my bracket, works better then original 1156. Also included is plexy glass for lens cover, to be modified.
https://www.facebook.com/share/1Ankh1UaLF/
Probably will do some more from Canada lots of neat stuff posted.
Dealer Visor Covers For Sale on OldWillysForum
Over on OldWillysForum (OWF) there was a group effort to reproduce the Dealer Visor Covers that the dealers put on Willys vehicles when delivered to customers.
If you are looking for that little conversation piece to add on to your Willys, please head over there and pick one up from their Store.
Dan B (@scramboleer) does a great job coordinating the effort, a special thanks to him for taking this project on, and to all the others that helped design and provide feedback to Dana (@Signsmith) who helped with the layout and graphics.
https://www.oldwillysforum.com/owfpages/page0/OWFcal.html
Now available: Willys dealer visor sleeve, reproduced on heavy-duty cardstock and pre-folded for easy installation.
Price includes shipping via USPS, custom packaging, book binding tape, and PayPal fees.
1. OWF All Stars – $19 for one sleeve (plus OWF sticker), $36 for two
2. General – $24 for one sleeve (plus OWF sticker), $41 for two
FAQ:
1. How many of these exist?
48 copies were printed in the first batch of printing.
2. Are they perfect?
No. There are a few inconsistencies (see pic below) that we will fix for the next version, if demand exists.
3. If printed, will the next version be cheaper?
No, the next round will be slightly more expensive.
4. How long does it take to arrive once ordered?
Estimate one week, depending how far you are from the West Coast.
Koenig PTO Winch $450 Pittstown, NJ
Andy’s Picks
Koenig Winch setup
Information from seller:
Winch shafts and PTO for Willy’s. PTO needs rebuild
https://www.facebook.com/share/19BsdutQX3/
