Yearly Archives: 2010

To Top

1951 M-38 Lampasas, Tx **SOLD**

• CATEGORIES: M-38 • TAGS: , This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was $2500.

(08/09/2010) This appears solid.

“1951 willys jeep 4×4 327 v/8 engine runs great. road ready.”

After Paint Job:

Before Paint Job:

[fb_button]
 
To Top

The Bantam BRC-40 T2 & T2E1

• CATEGORIES: Bantam-FordGP-WillysMA-EarlyJPs, Features This site contains affiliate links for which I may be compensated.

UPDATE: These images come from the War Wheels website. There’s a longer discussion no why changes were made to the gun placement.

Here’s what’s likely a 1941 image from warwheels.net of the Bantam BRC-40 T2 with the 37MM Gun on it mounted in the middle of the vehicle:

There were some problems with the T2, so the gun was moved to the back for version 1 of T2E1.

The army preferred this location, because a 2nd version of the T2E1 was developed that lacked a standard body (many more photos here):

Finally, there was also reportedly an anti-tank Willys MB version called the T21 with a75mm mounted in the rear, but I haven’t been able to verify it.

[fb_button]
 
To Top

1948 CJ-2A Redondo, WA **SOLD**

• CATEGORIES: CJ-2A • TAGS: , This site contains affiliate links for which I may be compensated.

UPDATE:  **SOLD** Was $2250.

(09/25/2010) If the rust situation is good, this might be a good price.

“1948 willys jeep cj2a 33000 original miles all stock except wheels and tires title in hand and colectors lic. plate 2500.00 obo you could drive this home today.”

[fb_button]
 
To Top

1958 CJ-3B Alturas, CA **SOLD**

• CATEGORIES: CJ-3B This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was $8000.

Someone chopped the sides of that hood.

“1958 Jeep CJ3B Frame off rebuild 5 years ago. 6,000 miles since rebuild 302 Ford V8, 3 speed automatic, BestTop soft top, roll cage, Mile Marker Hydraulic winch, rear seat/storage box, Detroit Locker in rear, 31″ oversize tires. Body in good shape, no dents or dings. Home garage paint job with a couple of chips.

Runs perfectly, loads of power. This is a narrow, short wheelbase vehicle with a high center of gravity so it must be driven carefully at highway speeds, but it will run down the freeway at 70MPH with ease. Vehicle needs nothing, but has lots of possibilities for cutomization/modification.”

[fb_button]
 
To Top

1951 CJ-3A Salem, Or **SOLD**

• CATEGORIES: CJ-3A • TAGS: , , This site contains affiliate links for which I may be compensated.

UPDATE: Was $6500. **SOLD**

This has an unusual approach to creating a dash for a fiberglass body.

“Selling my ’51 cj. It has a 225 v6, original t90 3 speed transmission, spicer 18 transfer case, dana 44 rear axle. The front axle is an upgraded dana 30. Everything works great just had carb and ignition tuned. Body is fiberglass. Asking $6500, but price is negotiable. Will possibly consider trade for toyota fj 60 or other toyota landcruisers”

[fb_button]
 
To Top

1956 DJ-3A & other parts Surprise, Az

• CATEGORIES: DJ-3A This site contains affiliate links for which I may be compensated.

No pics provided.

“I have a 56 Willys DJ3a with a good title for sale. I can’t finish it and am moving on. It is currently disassembled, and I will sell it all or part your choice. Here’s what I have.

1-Frame no cracks started boxing it and stripped it of spring hangers. $50.00
1-Tub needs some work front floor pans rusted, the rest not too bad. will come with title $150.00
1-pair front fenders $50.00 for the pair
1-hood $50.00
1-grill assembly with complete head light buckets and turn signals $150.00
1-windshield frame with good windshield $250.00
1-offset dana 44 complete but dissassembled $50.00
1-dana 44 30 spline carrier with 3.08 gearset. $75.00
1- narrow track disc brake dana 30 from a 79 CJ with 3.73 gears. $250.00
1-middle bench seat brown leather $30.00
1-2wd ford NP435 with small block ford bell housing and granny gear $150.00

or all of above and 1 engine from below for $1000.00

Below engines are complete and supposed to run I bought them for various projects and am now tired of tripping over them.
1-ford 3.8 v6 complete has small block ford bell housing pattern $250.00
1-ford 2.3 from an injected ranger or mustang $150.00
1-ford 4.0 from a ranger $250.00

all prices open to offers.”

http://phoenix.craigslist.org/wvl/pts/2009917565.html

[fb_button]
 
To Top

1962 Truck Shelby, Mi $1500

• CATEGORIES: Willys Trucks • TAGS: This site contains affiliate links for which I may be compensated.

This looks pretty original and I can’t see any obvious rust.

“What we have here is a 1962 Willy’s Pickup for sale. It has the 6 cylinder Super Huricanne Engine. Restorable but not running. $ 1,500 cash takes her home Call Rich at 231-861-6737.”

http://nmi.craigslist.org/cto/2010606586.html

[fb_button]
 
To Top

1951 Wagon Brookings, Or $1000 (or best cash offer)

• CATEGORIES: Willys Wagons This site contains affiliate links for which I may be compensated.

No pics provided.  This seller must sell within the next 2 days.

“I have a 1951 Willys Wagon that I NEED TO SELL in the next 72 Hours or loose My house!!! It is complete minus Motor/Trans/Transfer and radiator. Minimal rust and CLEAR TITLE! Cash only! Call Steve at 541-412-7837 $1,000 or best CASH offer.”

http://oregoncoast.craigslist.org/cto/2009733420.html

[fb_button]