Yearly Archives: 2011

To Top

1953 CJ-3A Denver, CO **SOLD**

• CATEGORIES: CJ-3A • TAGS: , This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was $3000

(07/21/2011) This looks like a good price.  I suspect the engine has been swapped out.

“Runs Great! Low Original Miles! Grandparent’s were Original Owners Miles are so low because they drove it in Evergreen Rodeo Parade! Can four wheel drive better that New Jeeps! Come see it at 80th & Sheridan area! Sorry pictures of it aren’t very flattering because it has been shop stored & was dusty!”

[fb_button]
 
To Top

1954 CJ-3B Castro Valley, Ca **SOLD**

• CATEGORIES: CJ-3B This site contains affiliate links for which I may be compensated.

UPDATE:  **SOLD** Was $5500.

(10/08/2010) “1954 Willys CJ-3b runs great and in good shape, Chevy 350, 4 speed manual trans, Full roll cage and soft top, Autometer gauges, 9000# Warn winch w/ reciever kit, Locked Dana 44’s front and rear w/ 4:56 gear, Warn overdrive, Will trade for a side by side, or sell for 5500 OBO”

[fb_button]
 
To Top

Parkette Body and Bobcat Hood (& more) Yakima, Wa **SOLD**

• CATEGORIES: Body Parts, Features, Racing, Roll Cage • TAGS: , This site contains affiliate links for which I may be compensated.

UPDATE:  Last price was $1000. It sold.

The Parkette fiberglass body is an extreme rare, well made body.  One of the best things about this body is that a CJ-3A windshield will properly fit it, unlike the fiberglass Bobcat body.   During the 1970s, a friend of mine bought a Bobcat body, prepped it, and painted it.  When he stuck on the windshield he discovered the cowl was too flat to properly seat the windshield to the cowl.  To say he was angry was an understatement, because he felt he was mislead by the promises the manufacturer made.

So, after talking with the Parkette body manufacturer and getting assurances that the measurements were more accurate, he bought the body and has been happy about it ever since.

The body shownn below has had it’s rear wheel wells cut a bit.  It’s got a good looking rollcage that has been attached to the frame.  If this has been available when I was building biscuit, I would have started right here.

[fb_button]
 
To Top

1958 CJ-3B Port St. Joe, Fl **SOLD**

• CATEGORIES: CJ-3B • TAGS: This site contains affiliate links for which I may be compensated.

UPDATE:  **SOLD** Was $1400.

(07/19/2011) The body looks pretty good.

“1958 Willy’s with matching numbers. Ready for a restoration. Motor is in the shop waiting to be picked up.”

[fb_button]
 
To Top

Kevin’s CJ-3B Farming Demonstration

• CATEGORIES: Features, videos This site contains affiliate links for which I may be compensated.

Kevin created several good videos of a farm jeep in its natural habitat.  Thanks for doing that Kevin!

1954 CJ3B with Monroe Lift , pulling a Ford 2-12 bottom plow:

1954 Cj3B farm jeep field disking demonstration at North Central Minnesota:

[fb_button]
 
To Top

Need a Crane?

• CATEGORIES: Features, videos This site contains affiliate links for which I may be compensated.

One resourceful Mitsubishi owner decided his jeep would work just fine as a crane after reading about the specs in All American Wonder Vol. III in the M-38A1 Section.

[fb_button]
 
To Top

1946 CJ-2A Pennsburg, Pa **SOLD**

• CATEGORIES: CJ-2A • TAGS: , This site contains affiliate links for which I may be compensated.

UPDATE: Was $3500. **SOLD**

This doesn’t run. It might be a VEC.  I think it might be a column shift.

“I have a 1944 willys jeep for sale 3500.00 or best offer. It has a new battery, original top, wheels, engine, and the original owners manual. Just bought a battery for it. The engine turns, but i did not try to turn it over because it needs work, just wanted to make sure it wasnt frozen. There is some rust on it, and it does need work. Would very much like to sell it to someone who has the time to restore this.”

[fb_button]
 
To Top

1949 CJ-2A Cameron, MO **SOLD**

• CATEGORIES: CJ-2A This site contains affiliate links for which I may be compensated.

UPDATE: Was $3900. **SOLD**

This looks solid.

“1949 Willys Jeep, 4wd with hi/low transmission. Excellant tires and wheels, new battery, runs great and is always garaged. Has nice seats and a removable soft top. New paint and tune up last year. An excellant buy, far below actual value. I don’t drive it much and need the garage space for winter.”

[fb_button]
 
To Top

1957 Flattie Inland Empire, Ca Call for Price

• CATEGORIES: CJ-3A • TAGS: , , This site contains affiliate links for which I may be compensated.

This looks like a well built rig. If the body is stretched, it isn’t obvious. The front fenders and hood might have been stretched though.

“1957 jeep willys, 500 hp small block, stand alone fuel injection (fully tunable) Malote streched custom body, built c5 with lowered planetary gears, dana 300 low gear transfer case, dana 44 front and rear custom built with detroit lockers and 4.27 gears, cv driveshafts by tri county, disc brakes front and rear, custom paitnt, custom fuel cell, custom guages, this has been a complete build and is turn key ready to go play, need nothing othe that a new home, make offer or trade nine 0 nine 2six2 0706 call with cash text with trades”

http://inlandempire.craigslist.org/cto/2550912105.html

[fb_button]
 
To Top

1948 CJ-2A Port Angeles, WA **SOLD**

• CATEGORIES: CJ-2A • TAGS: , This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was $7000.

This has an unusual striping motif. The last tags were in 1981, so I suspect the miles on the engine are pretty low.

“48 flat fender willys w/ roll bar and a 283 small block, new rear seal, new upholstered black leather seats. has canvas top and doors but is in fair condtion. drop down winshield, new battery, and all the lights work too…. tires are good but could use new ones in the future, its not a daily driver but it will climb a tree….. the last tags r from 1981, have clear title….it runs killer and has lots of power.”

[fb_button]