I’ll post some tomorrow morning …
– Dave
No Updates Tonight
June 12, 2011 • CATEGORIES: News This site contains affiliate links for which I may be compensated.
0
Yearly Archives: 2011
Dan’s retreads from TDS
June 11, 2011 • CATEGORIES: Builds, Features, Tires and Rims This site contains affiliate links for which I may be compensated.
Dan forwarded me some pics of his new tires from TDS. He notes these are particularly appropriate for this jeep, because all his grandfather bought for it were retreads. Dan did note how surprised he was at how difficult finding retreads was, especially since they are supposed to be so environmentally friendly.
“Here is my jeep with five new re-tread tires. I cleaned and painted the wheels too. The tires are 215/85R16 all terrain by TDS in Spokane. That was about the smallest radial I could find and the widest tire that would fit on the old 16×4.5 rims. My only other option was to go with a bias-ply and tubes. I saved about $340 by going with re-treads vs the cost of new. I think that they are the perfect height and width for what I was wanting.”
1950s Wagon Waxahachie, Tx **SOLD**
June 11, 2011 • CATEGORIES: Willys Wagons This site contains affiliate links for which I may be compensated.
UPDATE: **SOLD** Was $750.
“It is pretty complete with a 226 6 cyl 4×4 with hospital rear doors. Was a motor pool gov truck (has a plaque on the glove box). Would be a good restoration candidate or a super parts truck. Not running, however motor willy freely spin by hand. It has no title.”
1948 CJ-2A Centertown, Ky $3500
No obvious issues that I see.
“1948 Willys Jeep CJ2A, Excellent Condition, $3,500.00 Firm, Call 270-232-4359 or 270-945-8359”
http://westky.craigslist.org/cto/2433518260.html
1952 CJ-3A Springdale, WA **SOLD**
UPDATE: **SOLD** Was $2500. Could have been an APU.
“I am posting this running and driving 1952 Willys Jeep for a friend. This is just sitting around and there is some one out there that will enjoy this more than he can. This is a nice candidate for a restoration or just a driver as most every thing is still intact. Has origonal flat head 4 cyclinder motor that has been gone through. This was used as a plow vehicle before he bought a new tractor. The blade is gone now as it was sold ,but the 4×4 works and there is also a heavy duty winch still intact. Would like $2,500 obo.”
1948 Flattie Port Orchard, WA **SOLD**
UPDATE: **SOLD** Was $7500.
Lots of updates to this crawler.
“1948 Willys CJ2A flat fender. it has a 1992 chev TBI injection 350, sm 4 speed with granny low. 205 transfer case. 529 gears with detroit lockers, custom Alcan springs, bilstein shocks, cross over steering/ Hi steer. Warn upright winch,complete roll cage tied to the frame,it sits on 37″ toyo’s could be easily street able if you changed out the tires, I built this willys just to go play so I just put it on a trailer . Corbeau suspension seats with harness. The body is all steel original 1948 thats not beat up. there is just way to much to list this thing is ready for the trails.”
Year? Jeep Rod El Paso, TX **SOLD**
June 11, 2011 • CATEGORIES: Jeep Rods, Willys Trucks • TAGS: Nice. This site contains affiliate links for which I may be compensated.
UPDATE: **SOLD** Was $7500.
Lots of work has been put into this ride.
“ratrod pick up truck one of a kind,305 motor t 400 tranny 10 bolt rear end 4: chop top 9: channel dual exhaust up sweep pipes new tires”
1947 CJ-2A Sanger, CA **SOLD**
June 11, 2011 • CATEGORIES: CJ-2A This site contains affiliate links for which I may be compensated.
UPDATE: **SOLD** Was $300
that’s a strangely funky windshield.
“1947 Willys CJ2A Jeep tub and title.
Comes with some extra parts.
Need it gone to make room for new project.
Make any resonable offer.”
Year? CJ-2A Mecosta County, Mi $700
June 11, 2011 • CATEGORIES: CJ-2A This site contains affiliate links for which I may be compensated.
UPDATE: Still Available.
(06/04/2011) There might be some value, but pretty rusty, too.
“Here we have for sale a 194? Willys Jeep.
The engine that came with this Jeep is totally machined at Ferris State Univerity back around 1984 or so, I have all new rings, bearings, seals, gaskets, distributer cap and rotor, plugs and wires, even a new thermostat, new pressure plate, clutch, and throw out bearing. The crankshaft and camshaft were also completely machined, and the valves were ground and the seats were done also, and the valve guides were knurlized. The pistons and rods were also balanced. The engine is still apart and sitting under my work bench where it’s been since around 1984 or so. I also have a complete extra engine that goes with the whole deal, last I knew that engine was said to have run but burned some oil, but since I never heard it run I don’t know what the condition really is on it as it has been under the work bench all these years.
The jeep has a hi/low range 3 speed transmission and a lever engaged transfercase. I have the grille and starter, alt, ect. ect. I am pretty sure that all the parts are there to put this back together, they have all been stored in a trailer out of the weather all these years, and the new parts for the engine have been stored under my workbench in the garage with the two engines.
I know that I’ll never make the time to put this together and figure that if I sell it cheap enough someone may get some use out of it.
I spent a lot of money to have the work done on the engine and all the new parts were $550 so I really think that $700 is a very fair price.
Thanks for looking at this listing. I left the link to email me but a call would be much better because I don’t check the email very often.
call 231-872-5119 and leave a message if you don’t get an answer.”
http://grandrapids.craigslist.org/cto/2433852674.html
1946 CJ-2A Mt. Vernon, Wa **SOLD**
June 11, 2011 • CATEGORIES: CJ-2A This site contains affiliate links for which I may be compensated.
UPDATE: **SOLD** Was $1500
(06/01/2011) There appears to be value in this project.
“1946 Willys CJ2A, comes with an uninstalled 305 Chev small block engine, sits on 35’s. Great project for someone who has the time. Also have a running 300 straight, 6 engine, with transmition and transfer case, which came out of a 73 Jeep CJ 7, selling for $900.”
