Yearly Archives: 2014

To Top

1947 CJ-2A West Chester, PA **SOLD*

• CATEGORIES: CJ-2A This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was $3500

Runs and drives. Tub has been patched.

“Im selling my 47 willys jeep. Its runs and drives just don’t have place to store it like to see go to a good home. mechanicaly everything works fine. Engine is buick 225 v6 fresh rebuild in 2002 from top to bottom. All brakes have been replaced. Brand new period correct wiring harness from painless was replaced. All mechanical seals and fluids were replaced. Has power steering installed makes it a lot easier steering but do have all original steering column and parts. I have gone many places in this jeep it is a lot of fun to drive. Im asking 3500 obo no reasonable offer refused.”

1947-cj2a-westchester-pa1

1947-cj2a-westchester-pa2

1947-cj2a-westchester-pa3

[fb_button]
 
To Top

1942 GPW Tulsa, OK **SOLD**

• CATEGORIES: GPW (Ford MB), MB This site contains affiliate links for which I may be compensated.

UPDATE II: **SOLD** Was $2000.

UPDATE: Craig pointed out that it’s possible the MB frame on this the correct frame. Ford used the same frame supplier, Midland Steel, before they contracted with Murray Steel for the GPW frames. (http://olive-drab.com/od_mvg_www_jeeps_mbgpw.php)

For sale is a World War II, 1942 Script Ford Jeep, GPW, restoration project. Early 1942 Ford “Script Ford”. Might trade for 1965 to 1968 Mustang Fastback or Convertible in similar condition.
Body is Ford, Chassis is Willys. Titled on the dash VIN plate as Ford, GPW. Clear Ok. title.
Flathead engine is not correct, possibly late 40`s but I do have a Willys MB Block, WW2, (was running engine) that goes with the Jeep. Distributor boss is chipped on the block that is in the Jeep now, also some welding on the side of the block. Kaiser Supersonic head. ( adds 5 horsepower to engine ),I would use parts off the block that`s in it and put the MB engine in the Jeep. see picture. Correct Ford Transmission and Transfer Case. 1 seat is “F” , the other seat is WW2 Willys.”

1942-gpw-tulsa-ok0 1942-gpw-tulsa-ok1 1942-gpw-tulsa-ok2 1942-gpw-tulsa-ok3 1942-gpw-tulsa-ok4

[fb_button]
 
To Top

1957 Truck Gardiner, ME **Status Unknown**

• CATEGORIES: Willys Trucks This site contains affiliate links for which I may be compensated.

UPDATE: Was listed at $4800. **Status Unknown**

There is some work still needing to be done, but lots already completed.

this is a 1957 willys pick-up,,project. that needs to be finished.cab has been all done with new floors, rockers, cab corners, etc,1300 send on body work. 1000 spend on misc work.need s someone to finish. make into streetrod , ratrod or whatever..asking 4800 or BRO. money talks, want it gone.may do some trading for something that needs NO work. car,truck, motorcycle, antique auto.or 4-wheeler.”

1957-truck-maine1 1957-truck-maine2

[fb_button]
 
To Top

1948 CJ-2A Hyde, MI **SOLD**

• CATEGORIES: CJ-2A • TAGS: This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was $2500. Has a Kelly hardtop.

Includes a variety of parts. Engine runs, but smokes.

1948 Willy’s jeep, I have had it for about 25 years, parked it when I bought a 4-wheeler..I just got it running after it has sat for about 5 years, it smokes, but its old enough to do so, Ha. There is a complete extra engine that goes with it, plus many other parts, starter, generator, transfer case, spring, oil pans, rear end, and just so many parts I don’t know what all is there, there is a couple engine blocks also that I didn’t take pictures of, Take the jeep and all for $2,500, cash and carry, it is titled, I won’t sell any parts seperate, they are all for these years Willy’s.. Reply back if interested, and we can go from there, doors for the cab are inside it.. Of course its 4-wheel drive..high and low range..Will probably need some work, but it runs and drives as is..”

1948-cj2a-hyde-mi1 1948-cj2a-hyde-mi2

[fb_button]
 
To Top

1946 CJ-2A Eden, VT **SOLD**

• CATEGORIES: CJ-2A This site contains affiliate links for which I may be compensated.

UPDATE:  **SOLD** Was  $475.

Those front frame rails appear in good shape. Given that and the engine parts there seems to be some value here.

1946 Willys CJ2A . This Jeep would be best as a part vehicle, body is very rusty however the frame is still solid and has not been modified. The engine is complete but is stuck from setting. This would be a good donor Jeep for another project asking $475 if interested please call”

1946-cj2a-eden-vt31 1946-cj2a-eden-vt32 1946-cj2a-eden-vt33

[fb_button]
 
To Top

1946 CJ-2A Edinburg, MO **SOLD**

• CATEGORIES: CJ-2A This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was $1500.

I’m gonna bet this doesn’t run.

“complete willy jeep with blade great old jeep to restore. Have title”

1946-cj2a-edinburg

[fb_button]
 
To Top

No updates Sunday

• CATEGORIES: News This site contains affiliate links for which I may be compensated.

I’m taking Sunday off to work on Biscuit. I installed the new springs Saturday night (photos forthcoming) and will begin the engine installation Sunday.

Meanwhile, later this week my boys arrive. We’ll have a short time together, so there will be some reruns of old posts later this week. Next week Ann, her mother, and I will be camping up by Deception Pass. I don’t expect to be doing much but relaxing, so I will have mobile updates from there.

[fb_button]