Yearly Archives: 2014

To Top

1948 CJ-2A “Lefty” Houston, TX **SOLD**

May 30, 2014 • CATEGORIES: CJ-2A • TAGS: , . This site contains affiliate links for which I may be compensated.
0

UPDATE: **SOLD** Was $6500.

It looks like this may have been a ‘lefty’.

“1948 Willis flat fender jeep. This jeep is week built with 1993 throttle body injected 4.3 Chevy v6 and 4 speed transmission. Runs great, just tuned up, has headers, electric fan, Wilwood brake, clutch, and gas pedals, along with wildwood master cylinder and hydraulic clutch cylinder, Flaming River tilt steering column, low back factory style seats in great shape with 4 point harnesses, New best top and doors (no rips) later model front axel out of CJ 5, new brakes, tilt out front windshield, no rust, new springs with graspable shackles, black bed liner on engine compartment and tub, red bedliner on body, well built jeep, 4 wheel drive works great, clear title, perfect for town or the ranch.”

1948-cj2a-houston-tx41 1948-cj2a-houston-tx42 1948-cj2a-houston-tx43 1948-cj2a-houston-tx44

[fb_button]
 
To Top

1949 CJ-2A Hillsboro, OR **SOLD**

May 30, 2014 • CATEGORIES: CJ-2A • TAGS: . This site contains affiliate links for which I may be compensated.
0

UPDATE: **SOLD** Was $5100

“Here we have a 1949 CJ2A. NO RUST . Rig spent its first 63 years in Eastern Oregon. Factory 134 Flat head, A lot of fun to drive and gets lots of thumbs up. I have had the Jeep for about 2 years it is pretty much stock. The only upgrades done to it are strickly for safety.

I had R and P install 11″ front Drums, and steering box upgrade to a 1971 CJ version. I also replaced all four springs with super lift 1″lift soft ride with U-bolts and shocks. I had the Radiator Rodded out last summer. And had some seat belts installed.

It was painted about 5-6 years ago and comes with the tow bar. For being 65 years old It looks pretty damn good. I have put about 130 miles on it mainly take to car shows and take kids out for ice cream during the summer. I’m somewhat flexible on price but from what I have seen on ewillys.com you are going to have to look for a long time before you find another one this nice in this price range.”

1949-cj2a-hillsboro-or01 1949-cj2a-hillsboro-or02 1949-cj2a-hillsboro-or03 1949-cj2a-hillsboro-or4

 

[fb_button]
 
To Top

1974 CJ-6 Houston, TX $11,400

May 30, 2014 • CATEGORIES: CJ-6 This site contains affiliate links for which I may be compensated.
1

Looks solid, but there is some body damage on the rear (see last pic).

http://houston.craigslist.org/cto/4490283330.html

1974-cj5-houston-tx-61 1974-cj5-houston-tx-62 1974-cj5-houston-tx-63 1974-cj5-houston-tx-64

“For you true Jeep connoisseurs that know what you are looking at, up for sale is a rare VIN numbers matching 1974 Jeep CJ6 in good driving condition. I drove this Jeep back from Kentucky with no issues. This Jeep starts up every time with no issues and it has the 5.0L AMC 304, which has been enhanced a little, with the 3 speed T-15 transmission and a Dana 20 transfer case. It has a 27 spline Dana 30 front axle and a 30 spline Dana 44 rear axle. The tires are at 85% and the front brake lines were just replaced. The brake pads are good at around 90% and this Jeep is ready to get in and go! The floor boards are solid and the exterior needs some work. The current clutch works fine and I have a new in the box clutch for it as I do not know the age or remaining life of the current one and I have not had time to replace it. I would rather be safe than sorry. The 4WD does work and the locking hubs work well. 

Continue reading →

[fb_button]
 
To Top

1953 CJ-3B Placerville, CA **SOLD**

May 30, 2014 • CATEGORIES: CJ-3B This site contains affiliate links for which I may be compensated.
0

UPDATE: **SOLD** Was $1200

(05/30/2014) Looks like a good project.

“This is 1953 Willys Cj3b Jeep, (high hood), it is a body and frame, the frame has been sandblasted, primered, and Saginaw power steering box installed, V6 motor mounts already installed, front dana 27 axle rebuilt, the rear dana 44 has one piece axles, and has been rebuilt, Rancho 2 1/2 springs at all 4 corners, 11″ brakes, the tub is a replacement, new, never fully installed, the hood is perfect, Stewart-Warner gauges, full roll cage, I have the windshield, (glass is broken), this is a complete body, no vin tags on the body, sold with a bill of sale only, this would make a great project, or replacement for your worn out jeep.”

1953-cj3b-placerville-ca1 1953-cj3b-placerville-ca2

[fb_button]
 
To Top

1946 CJ-2A Clovis, CA $1100

May 30, 2014 • CATEGORIES: CJ-2A This site contains affiliate links for which I may be compensated.
0

It’s got a VEC body.

“Another rare barn find. 1946 Jeep CJ2A. Yes, it needs a lot of work. No, it doesn’t have an engine. Tires will hold air long enough to get on a trailer. Vehicle has been sitting many years. Are you looking for something to do with your kids or by yourself this summer? Thanks for reading.”

http://fresno.craigslist.org/cto/4494806816.html

1946-cj2a-clovis-ca01 1946-cj2a-clovis-ca2

[fb_button]
 
To Top

1953 CJ-3B Albuquerque, NM **SOLD**

May 30, 2014 • CATEGORIES: CJ-3B This site contains affiliate links for which I may be compensated.
0

UPDATE: **SOLD** Was $2200

“I have a 1953 Willys jeep for sale or trade. I have 95% of all the pieces needed for it. The body and chassis are together but most parts are off the vehicle including the engine (but not the rest of the driveline). I also have an extra body tub, hood, and windshield. Project vehicle which unfortunately, I do not have enough time to work Asking 2200 OBO and also open to trades and/or Cash. Need to sell as soon as possible”

1953-cj3b-albuquerque-nm41 1953-cj3b-albuquerque-nm42

[fb_button]
 
To Top

1946? CJ-2A Oklahoma City, OK $4000

May 30, 2014 • CATEGORIES: CJ-2A This site contains affiliate links for which I may be compensated.
0

Engine is frozen. Title is in the works. Price seems a bit steep given those factors.

“I have a Willys Jeep CJ2A. I traded some work for it. Title is in the works. The Jeep is all there, it has a 4 cylinder with a manual transmission. 4 wheel drive. It appears to be all there, and in working condition. I was told it is a 1946 model, but do not know for sure as of yet. See pics, if you have interest please call or text after 5:30 PM Monday thru Friday and on weekends at decent time. I will be happy to answer questions or show it if you wish. I wanted a custom jeep, and I just don’t have the heart to customize this piece of Americana. I would like to find someone that wants to restore it, but once you own it, it doesn’t matter to me what you do with it. ENGINE IS FROZEN.”

http://oklahomacity.craigslist.org/cto/4493444578.html

1946-cj2a-okc-ok1 1946-cj2a-okc-ok2 1946-cj2a-okc-ok3

[fb_button]