“I’m looking for a PTO winch that would have been (or be on) any Jeep (CJ, Wagon, Willys, etc.). Do you have one on or off the vehicle? I can remove. Must be within reasonable distance to eastern SD or western MN.”
Author Archives: deilers
1952 CJ-3A Clayton, NC **SOLD**
UPDATE: **SOLD** was $5000.
(10/18/2010) There’s been some updates to this, including moving the gas tank to the back. Are those mirrors on the front fenders?
“I have a 1952 Willys Jeep for sale. It has a buick 231 v6 engine, and 5:38 gears. The axles, transmission, gears, transfer cases, emergency brake, and drive shafts are all original. It has a roll bar, a light bar, and nice seats. It is sitting on 31″ goodyear tires and steel wheels. I put brand new shocks, a radiator, and dual flowmaster mufflers on it. Also a new battery. Full Size spare tire and spare tire mount on the back. Trailor hitch and good solid steel bumbers. Carb is off because I rebuilt it. Will have to tow it. Make me an offer. ”
1948 CJ-2A Whestone, Az $2300
UPDATE: Still Available
(11/13/2011) No motor/tranny/the. The seller notes this is part CJ-2A and part M3-B1. I’m not clear on what a M3-B1 is exactly.
“Cj-2a moded to a M3-B1, No moter, no transmission,no transfer case. Rearend is a DANA 31, Frontend DANA 25.Electrical is all there.Body is in decsent shape for 60 years old. This is a prodject vechile only, and sold as is, title is clear. I am in the Military Please Don’t call before 6PM.Asking 2300.00 Or Best Offer. If interested Please call or text Corey @ 520-335-5653”
AC/DC Portable Welder Sevierville, Tn **SOLD**
UPDATE: **SOLD** Was $700
(01/13/2010) “ac dc generator I have not use the generator but the welder works great.
it is powered by a gas powered by a willys hurricane F 134 engine
it’s a great machine I just don’t use it very much anymore
I would trade for a truck cab , fenders with title for a project
all trades will be considered
Please call or text anytime
a response by email will be delayed response as I do not check it often
if you call and do not get an answer please leave ”
Polly, a 1952 CJ-3A Sculpture
This unique sculpture created by Richard White is available for sale. Go to his website to see more pictures.
http://www.DrawToLive.com/3D_Sculpture_Pages/1952_Willys_CJ2A_Jeep_Polly.htm
Bill’s updated Jeepster
Originally a Shriner’s Jeep, Bill decided since it was already had some drivetrain mods that he would take it further.
He writes, “It now sits on a altered Cherokee chassis with Dana 44 frt and rear with a 4″ lift. It is powered by a Turbo 400 and a 304 AMC. I’ve kept it original looking with a Jeep wheel and the track width is right on. This is one Jeep missed out on produceing. Drove it all last summer and just love it.”
Before changes:
After changes:
French Fire Service Engine & Water Truck Netherlands eBay
Glenn spotted this fun toy.
“Here we offer you a wonderful and hard to find, vintage `late `70ties up to the early `80ties produced, French Tin Plated Jeep Model with Trailer. This set was produced by Joyax in France. Its a genuine model and NO replica. This is one of the last Tin Plated models which was produced. Today these models are difficult to find in such wonderful and crisp condition as the one we offer you here. The model is unused!. The Jeep is a Wind-Up model and comes with the key. The box is like new too. This set depicts a USA Fire Service Car with Trailer. An awesome asset within any Jeep collection or Fire Engine collection. Be keen on this beauty. The scale is about 1:28 Fully made of tin plated and bright lithographed material. A Very RARE find these days. Be keen on this less seen treasure.”
1945 Flattie Santee, CA **SOLD**
UPDATE **SOLD** Was $4000.
This has a variety of updates.
“1945 willys jeep on a 1973 cj chassis with a chevy 4.3 v-6 with outside frame rail headers, it also has a DANA 44 rear end and new aluminum radiator. I currently has a 700r4 transmission and is two wheel drive. I used it primarily around town and to the beach, I have a t-18 with dana 20 transfer case to convert back to 4 wheel drive. It has been a fun to have around but time to move on to something different.
1947 CJ-2A Petal, Ms **SOLD**
UPDATE: **SOLD** Was on eBay.
The SN plate seems to be missing the last number, with a line over where the last number should be. I would guess this is really a 98xxx serial number. The seller also notes that the “Jeep is in great condition”. Really? Interestingly, this has full floating rear hubs, too.
“Specifications:
1947 Willys CJ-2A Jeep, 4×4, 2-Door, 4-Cylinder Flathead Engine, Manual Transmission, 12-Volt System, Soft Top, PTO Front Mount Winch, Manual Lock Hubs, Gun Rack, New Gauges, Choke Cable, Starter Switch, Light Switch, Fuel Pump & Compass, 31 x 10.50R15LT Tires, SN:9803, Mileage Unknown (Doesn’t have odometer, has speedometer!). Manufactured by Willys-Overland Motors, Inc.,Toledo,OH,USA
Jeep is in great condition, cranks right up, runs great, engine, transmission, clutch, brakes, transfer case, pto, winch all in great shape and work perfect, tires have less than 100 miles on them, body is not rusted out by any means, has a little rust under but can be seen in the photos, nice unit ready to use, no repairs needed!
The photos were taken the same day as the listing, December 28, 2011, and show the jeep in its current condition! I have another 15+ photos that can be sent to you by request, please send an email address for me to send them~”
1948 CJ-2A Cheney, Wa $450
There is value here. Apart from the owl dung, the body and body parts look good.
“This jeep is a project. needs engine, wiring harness,lot of parts to complete. The tranny is still there. I have had this jeep for about 23 yrs stored in a barn as you can see from all the owl dung on it. The tub is in decent shape for the year.The tub is just sitting on the frame. Comes with manny parts. Have clean title in hand.Thanks for looking. Only CALL to contact me . 425-327-9721 Thanks, Doug $450”















