Author Archives: deilers

To Top

1952 M-38 Body Chatham, NJ eBay

• CATEGORIES: Body Parts • TAGS: , This site contains affiliate links for which I may be compensated.

Steve’s is listing this body in case someone wants it.  This is saveable, but will take some work.

“Looks to be a 1952 Willys M38 original body. No body tag number – so guessing at year based on certain features, i.e. data tags get mounted on plate rather than directly on dash.

This body is about to go to the scrap heap – so I figured I’d offer here before cutting up.  This body needs new front floor section and new hat channels.  Body has a lot of bondo on it and very unprofessional body work throughout.  Also has been chopped a little near front firewall due to someone named Bubba installing a V-8 in the frame this was sitting on.

If you are good with metal work and want to start with an original 1950’s body this is for you. If your not good with metal work, buy a repro. from DL Bensinger don’t buy this body it needs a lot of work.

Local pick up only (although, I could deliver it up to 50 miles for a fee if paid in full). No shipping. No returns, no guarantees. Come take a look if you are local.”

View all the pics on eBay

[fb_button]
 
To Top

1942 GPW Rhome, TX **SOLD**

• CATEGORIES: GPW (Ford MB) This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was $3500.

I”m gonna guess that not all the new parts are shown in the pics.

“1942 Army jeep willy built by Ford. Over $3000 in new parts. Obo.”

[fb_button]
 
To Top

1948 Model? Bethel Park, Pa $1500

• CATEGORIES: Willys Wagons This site contains affiliate links for which I may be compensated.

No pics provided.  I’m guessing this is a wagon.

“48 Jeep Overland project.283, 4wd, red/white Mostly original. Vehicle has been garage kept and have not gotten back to finish it. Still in fairly good condition. Need bodywork finished and whatever mechanical would now be needed. Great for restoration. Considering offers. Don’t currently have photos. Garage is very narrow. Ad is being run for a friend. Call # if possible. 412 335-7572”

http://pittsburgh.craigslist.org/cto/2247517634.html

[fb_button]
 
To Top

1946 CJ-2A Republic, MO **SOLD**

• CATEGORIES: CJ-2A • TAGS: This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was $1000.

This runs and drives.

“1946 CJ2-A Willys Jeep… runs good, has original engine and ALL parts; I put an aftermarket carb on it and a reproduction fuel pump – however I have BOTH of the original pieces that can be re-worked and I’m sure they would work (I cleaned them both but just couldn’t get it to run with them).

New suspension all around, original military spec rims and good rubber. Have a new shop manual as well – plus lots of odds and ends parts. I have an extra fly wheel, extra front differential with hubs, extra steering wheel and neck assembly. I need to move to a smaller work shop and have to get rid of the project… come and get it!!”

[fb_button]
 
To Top

1952 CJ-3A Texarkana, Tx **SOLD**

• CATEGORIES: CJ-3A • TAGS: , , This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was $10,000

(03/29/2010) The top in particular looks really nice.

“This Jeep had an off the frame complete restoration done.  It has the original 4-cyclinder engine, new transmission, and a rebuilt transfer case.  Also, has new brakes, hoses, springs arched, radiator, and carburetor.  The original lights and horn are 12-volt.  The Jeep does have lock-out hubs.  Jeep is winter green with black interior seats.  Jeep has the original working heater and metal Koenig top with doors.  Jeep has approximately 300 miles on it since restoration.  This Jeep is in excellent original condition with new tires and is ready to go”

[fb_button]
 
To Top

1955 CJ-5 Davison, Mi $994

• CATEGORIES: CJ5 This site contains affiliate links for which I may be compensated.

UPDATE:  Still Available

(01/27/2011)  This guy is willing to do whatever it takes to sell this rolling chassis.  This is located at Hank Graff Chevrolet.  I wonder what they wrote off as the trade in value on this rig?

“CHECK THIS OUT…NO MOTOR, NO TRANS…NO TRANSFER CASE NO SEATS… .NOW THE POSITIVE…IT IS REALLY CUTE….WOULD MAKE A TERRIFIC FLOWER PLANTER FOR THE RIGHT FAMILY…. IT IS REALLY CUTE.. REMARKABLY, THE FRAME APPEARS TO BE IN PRETTY GOOD SHAPE…. FRONT PIG IS THERE …THAT IS NOT PATTON POSING BY THE WAY… PATTON WAS MUCH BETTER LOOKING …THINK LONG AND HARD AND EVENTUALLY YOU WILL FIND SOMETHING CREATIVE TO DO WITH IT… I HEARD SOMEWHERE THE OLD CHEVETTE MOTOR WORKED WELL IN THE OLD WILLYS ??? MAYBE I JUST DREAMED IT… THE FELLA PRETENDING TO BE A MOTOR… WE CALL HIM AARON… AARON ERWAY…. ‘IT’S YOUR WAY WITH ERWAY’ WHERE ELSE CAN YOU BUY A 1955 WILLYS FOR UNDER A GRAND ? … COFFEE IS ALWAYS ON …”

http://flint.craigslist.org/ctd/2246553774.html

[fb_button]
 
To Top

1945 GPW Sand Jeep Project Junction City, OR **SOLD**

• CATEGORIES: Racing This site contains affiliate links for which I may be compensated.

UPDATE:  **SOLD** Was $2800

There’s still some work left.

“I have for sale a 1945 willys jeep built by ford. It doesn’t need much to get running. It has a new 450 horsepower 388 cubic inch chevy engine. The engine is pump gas friendly with edelbrock rpm heads and a comp 282 hydraulic roller camshaft. Tranny is a short tail shaftturbo 350 and has a tci reverse manual valvebody and 3500 stall converter. The tranny needs new clutches. Rearend is an old dana 44 with 4.30 gears and is welded. Front end is a mail jeep 2 wheel drive straight axle that shaved 130 lbs off the front from the old dana 30. The jeep body is a little rough on the sides but has been heavily modified everywhere else and was nicely done has gm pedals and tilt and telescoping steering wheel. Tires are 16.50×15 paddles on new 15×12 wheels. It has a clear title and new tags as I drove it a little last summer. I am willing to part this jeep as well. Engine should make about 450 horsepower and 450 torque and is daily driveable.
Runs great. Has 60lbs of oil pressure.
Ill sell the engine alone for —————————————————————————————————-$2000 which is half what it costed me.

Transmission is a th350 short tailshaft with
TCI reverse manual valvebody
new j.w. 3500 stall converter
hurst shifter
tranny needs rebuilt.—————————————–350 bucks for all of it.

Paddles are 16.50×15 in fair condition with new tubes and newer 15×12 wheels with 5on5.5 pattern———$300

The Jeep i will sell for 2800 firm complete or just the rolling chassis w/out the paddles for ——————-$850
Also the jeep has a dana 44 with 4.30 gears and welded diff. Front is a postal jeep straight axle
2wd. To get running needs a carb, and tranny rebuild and a front wheel cylinder. I will drive with a carb on it.”

 

[fb_button]
 
To Top

1946 CJ-2A Casa Grande, AZ **SOLD**

• CATEGORIES: CJ-2A This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was $1400.

(09/21/2010) Needs work.

“i have a 47 willys the tube is in good shape,frame and drive train is in very good shape,all the drive train is there.it ran when i parked it but needs some work,it has the 4 cyl. its not a flat head its all there,2nd owner.”

[fb_button]
 
To Top

1946 CJ-2A Berlin, NJ Status Unknown

• CATEGORIES: CJ-2A • TAGS: This site contains affiliate links for which I may be compensated.

UPDATE:  Status Unknown. Price dropped to $1595

(08/30/2010) This needs work.

“1946 CJA Jeep -Needs restoration. Original motor, trans, etc.  But there are enough spare parts that are included in the purchase that will make the restoration a breeze.”

[fb_button]
 
To Top

1946 CJ-2A Palocedro, CA **SOLD**

• CATEGORIES: CJ-2A • TAGS: This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was $3500.

(03/30/2010) It appears this has a replacement body.

“1946 Jeep CJ2A, original 134ci flat head, many new parts, no rust, very good condition and very original.. $3500.obo ”

[fb_button]