Author Archives: deilers

To Top

1948 CJ-2A Hastings, MN **SOLD**

September 2, 2014 • CATEGORIES: CJ-2A • TAGS: , . This site contains affiliate links for which I may be compensated.
3

UPDATE: **SOLD** Was $1000

Doesn’t run, but there’s value here.

“IF YOU SEE THIS ADD IT IS STILL AVAILABLE! 1948 Willys cj2-a. Jeep is complete with original half cab, original add on radiator grill screen and complete plow set up, plow not pictured at this time. All original from new. I have had this for about 7 years. Planned on a restore but plans changed. Traveled and bought from the original owner, a old lady in Missouri. Unit is very restorable. Price is $1000 Firm. I know the plow on this unit is worth 500-700 so this a great deal. come get it! Does not run and will need a lot of work. “

1948-cj2a-hastings-mn0 1948-cj2a-hastings-mn1 1948-cj2a-hastings-mn2

[fb_button]
 
To Top

Stainless Flattie $5000

September 2, 2014 • CATEGORIES: stainless/jewels This site contains affiliate links for which I may be compensated.
0

This was listed in the Sacramento Craigslist, but is really located in the Philippines. Interesting soft top.

“AN ORIGINAL, FLAT FENDER JEEP CJ 2A REPLICA MADE IN THE PHILIPPINES WITH A TOYOTA DRIVE TRAIN. 4 CYC. 13T ENGINE WITH FIVE SPEED MANUAL TRANSMISSION IN EXCELLENT CONDITION. SOFT TOP (RED) TWO SEATS AND BENCH CUSHION IN REAR, RUNS GREAT , LOOKS BETTER WILL NEVER RUST. ENGINE WAS REBUILT TWO YEARS AGO TOP END.
WON’T LAST LONG; YOU MUST DO THE SHIPPING, I DELIVER IT TO PORT IN MANILA”

http://sacramento.craigslist.org/cto/4647568328.html

1947-stainless-sacramento-ca1 1947-stainless-sacramento-ca2 1947-stainless-sacramento-ca3

[fb_button]
 
To Top

1952 CJ-3A Hastings, MN **SOLD**

September 2, 2014 • CATEGORIES: CJ-3A This site contains affiliate links for which I may be compensated.
0

UPDATE: **SOLD** Was $5500.

Runs and drives, but has some step in the passenger step.

“For Sale- 1952 Willy’s CJ3A. Runs, drives and has been upgraded to 12 volt system with alternator.
New 16″ tires, brakes system gone through, wheel bearings replaced, new intake, manifold, carb and water pump. I134 “Go Devil” inline 4 Cylinder, New windshield glass. Body is solid, needs some minor rust issues repaired. Good little Jeep project, Clear title.
I just don’t have the time, space or desire any more. $5,500. or B/O contact Bill”

1952-cj3a-hastings-mn2 1952-cj3a-hastings-mn3 1952-cj3a-hastings-mn4

[fb_button]
 
To Top

1950 M-38 Sparta, NC $3400

September 2, 2014 • CATEGORIES: M-38 • TAGS: . This site contains affiliate links for which I may be compensated.
0

No running. It has an unusual update to a CJ-5 windshield.

“1950 Willys Jeep m38a with clear title. 4×4 Modified with narrowed folding cj windshield and custom lightbar and rear bars, perfect for hauling a canoe or ladders. Hurricane 134 4 cylinder converted to 12 volt with original 6 volt starter. Motor rebuilt around 2006-07 with reciepts. Ran when parked in 09 with less than 1000 miles on rebuild. Needs some tlc to get running. Starter went out in 09 and hasn’t been started. Alot of parts put into this little jeep in 07 like custom seats and frames, 12 volt gauges.Rear receiver hitch tube and homemade cargo carrier for reciever. Rebuilt wheel cylinders and many other parts. Great project for traveling in the woods or riding along the beach. Thing would climb trees. For sale $3400.00 Cash only.”

http://winstonsalem.craigslist.org/cto/4647302901.html

1950-m38-sparta-nc0 1950-m38-sparta-nc1 1950-m38-sparta-nc2

[fb_button]
 
To Top

1953 CJ-3B Longview, WA **SOLD**

September 2, 2014 • CATEGORIES: CJ-3B This site contains affiliate links for which I may be compensated.
0

UPDATE: **SOLD** Was $5000

Its a project with a variety of new parts.

“1953 Willys CJ3B High Hood Jeep. This is a non running project with a pile on new and rebuilt parts. The Jeep is from Eastern Washington so there is NO rust.
NEW UNUSED PARTS; Flaming River tilt column w/shaft/ujoints, Wilwood swinging pedels with master cyls., Corbeau lowback front buckets and rear bench, two windshield wiper assemblies, all window frame/windshield seals, stainless latches-hood and windshield, fuel tank w/ sender/cap/straps/, Edelbrock elect. choke carburator, Edelbrock Performer intake, Edelbrock air cleaner, Billet rocker covers, Hooker block hugger wrapped headers, Griffin aluminum radiator w/duel elect. fans (cools up to 600hp), Painless wire harness, clutch hydraulic slave cyl., Rancho 4″springs (front and rear) w/shackle reversal, Willys tailgate, Willys hood, windshield frame w/glass.
REBUILT; 1965 Chevrolet 325hp 327 (Chevelle), Dana 25 and 27 axles, 10″ drum brakes, Toploader transmission w/Hurst linkage (new clutch).
The Jeep currently has; American Racing wheels with 32″BFG all terrains (90%), all factory seats and frames, full cage, installed power steering box with pump, and also comes with an extra T10 4speed with Advance Adaptor for a Dana 18 or 20, a clean title with collector plates. I’m sure I am missing some stuff. $5000 OBO/part trade for Banshee or Toyota 4×4.”

1953-cj3b-longview-wa21 1953-cj3b-longview-wa22

[fb_button]