CJ-3A Research Archives

CJ-3A, CJ3a

To Top

1951 CJ-3A Maple Valley, WA **SOLD**

• CATEGORIES: CJ-3A • TAGS: This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was $6000

Looks good from the little I see.

51″ Flat Fender Willies, V6, New Interior, New Paint. Must come out and see, Seriuos inquieries only. Please only contact by phone,”

 
To Top

Year? CJ-3A West Milford, NJ **SOLD**

• CATEGORIES: CJ-3A • TAGS: This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was $1500.

Unclear just how much value is here.

“As is not running”

 
To Top

1951 CJ-3A Pueblo, Co **SOLD**

• CATEGORIES: CJ-3A This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was $2000.

The body appears to be a little rough, but hard to tell just how much given the paint job.

“The jeep has a 350chevy motor! Runs great! Four wheel drive, original runing gears has 15″ mudders! 3000.00 or best offer. Jeep is an awesome hill climber and would be great for any hunter! Welcome to come by an check it out! ”

 
To Top

1953 CJ-3A Gales Ferry, CT $3800

• CATEGORIES: CJ-3A • TAGS: This site contains affiliate links for which I may be compensated.

I’m guessing it has been a while since this won trophies.  Looks like it might have been nice at one time though.

“350ci built Chevy engine. Fulie heads, Edelbrock torker, Holley, fender well headers, Turbo 350, custom Dana 44’s front and rear with 4.27:1 gears. Posi front and rear. Full cage, Deist 5 point harnesses, dual batteries, Ground Hawg tires. Has won many trophies for show. Very fast! Unbeaten off-road.

Now the bad news: the jeep has been siting for several years. Has rust, and occasional glitch in the transfer case (jumps out of gear once in awhile.) I think it is a linkage adjustment problem. Transfer case was rebuilt approx. 50 miles ago. With some TLC, this jeep could be one of the best in the State, as it was 20 years ago. If you are mechanically inclined, and are looking for an awesome project, this may be for you! I have over $20K in this machine. Now it just sits in the yard. Asking $3,800. Would consider trade for small pickup truck.
Email or call 860-464-6949”

http://newlondon.craigslist.org/cto/3139314835.html

 
To Top

1951 CJ-3A Becket, MA $12,000

• CATEGORIES: CJ-3A • TAGS: , This site contains affiliate links for which I may be compensated.

This looks like a solid restoration.

“1951 Willys Jeep-fully restored. Excellent condition Phone 413-446-1713”

http://westernmass.craigslist.org/cto/3139537991.html

 
To Top

Braden Winch CJ-100 Palo Cedro, CA **SOLD**

• CATEGORIES: CJ-2A, CJ-3A, CJ-3B, Parts This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was $250.

Looks like a good price on a PTO.

“Braden PTO: Made by Braden Winch Co., Model cj-100. The output shafts are for front or rear aplication. W/ shifter. Bolts to back of transfer case. For willys cj2a, cj3a, cj3b. see pics.”

 
To Top

Koenig Half Top Palo Cedro, CA **SOLD**

• CATEGORIES: CJ-2A, CJ-3A, Parts • TAGS: , This site contains affiliate links for which I may be compensated.

UPDATE: Was priced at $400. **SOLD**

Here’s a great price on a nice half cab.

“Koenig metal half cab: New glass and channels in back and both doors. Door windows roll up and down, All handles work properly. Excellant condition. For willys – cj2a, cj3a, cj3b. Koenig model – standard half cab 335. Weight, 235 lbs. see pics. (please excuse pics., hard to stage cab free standing) 530 547 4520”

http://redding.craigslist.org/pts/3140713628.html

Continue reading

 
To Top

1949 CJ-3A Cherry Valley, Illinois **SOLD**

• CATEGORIES: CJ-3A • TAGS: , This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was $1300.

The seller lists this as a 2A, but looks to me to be a 3A.  This looks like an excellent project for the price.

“I have a 1949 Willys Jeep available for sale. It runs, but the fuel pump needs to be rebuilt (we were able to confirm that the engine is good by delivering gas straight into the carburetor). It also currently does not have brakes, although I have a brand new master cylinder and brand new wheel cylinders to go with it–these parts just need to be installed. It comes with a snowplow, but the hydraulic system for it needs to be overhauled. My grandfather found the Jeep in a salvage yard a number of years back and brought it back to life so that he could use it to haul wood around on our family farm. However, he passed away several years ago and the Jeep hasn’t been used much since then. This is a good project Jeep–everything is there; it just needs some work to get it back into good condition, and we don’t have the time to put into it. We will be demolishing the farmhouse and garage where it is currently being stored, so we’re forced to get rid of it. Other issues I can see with the vehicle: the windshield is cracked, the cooling system probably needs to be flushed, and the interior needs reupholstering.”

 
To Top

1951 CJ-3A Mount Lake Terrace, WA $15,000

• CATEGORIES: CJ-3A • TAGS: This site contains affiliate links for which I may be compensated.

Looks nice and comes with a Bobcat hood, but a better description would help.

“307 CHEVY 210 HP
TO MUCH TO LIST
15 THOUSAND FRIM”

http://seattle.craigslist.org/sno/cto/3137868896.html

 
To Top

1953 CJ-3A Harrisburg, AR **SOLD**

• CATEGORIES: CJ-3A • TAGS: , This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was $3000

(07/26/2011) This may be a solid jeep for the price.

“i have a 1953 willys jeep that is in really good shape, have a rebuilt willys engine. 3 speed transmission and four wheel drive works great.. i am asking 3000 but might consider trading it for a nice bumper pull camper or a nice ski boat with open bow..and must be water ready…thank for looking.”