CJ-3A Research Archives

CJ-3A, CJ3a

To Top

1951 CJ-3A Tehachapi, CA **SOLD**

• CATEGORIES: CJ-3A • TAGS: This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was $4800.

(01/07/10) I believe the seller means that this jeep is running a Dana 30 in the Front end and utlizes a SM420 for the transmission.

“FOR SALE IS A 1951 WILLYS JEEP, IT HAS A 4.3 LTR V6 CHEVY MOTOR WITH A SMR4 TRANNY. IT HAS A DANA 18 TRANSFER CASE ,A WARN OVER DRIVE, THE “GRANNY GEAR” WITH THE OVERALL RATIO OF 94 TO 1. IT HAS THE DANA 20 IN THE FRONT WITH LOCK RITE LOCKERS, DANA 44 IN THE REAR WITH THE OX LOCK, cable is broke, IT HAS 538 GEARS. IT ALSO HAS A WARN WINCH,SOFT TOP WITH DOORS, AND EVEN HAS A HEATER IN IT. IT HAS 33 INCH MUD BRUTE TIRES ON 15 INCH CROME RIMS WITH A SPARE ON THE BACK. IT HAS A CD PLAYER WITH 6X9 SPEAKERS. IT DOES HAVE A LITTLE DAMAGE ON THE FRONT PASSENGER FENDER as shown in the pic, WHICH HAS BEEN STRAIGHTEND OUT, OTHER THAN THAT THIS JEEP IS IN GOOD CONDITION FOR BEING 59 YEARS OLD. IT RUNS GREAT AND SOUNDS GOOD TO. IT HAS EVERYTHING DONE TO IT AND IS READY TO GO JEEPIN. MY LOSS YOUR GAIN”

1952_cj3a_tehachapi

[fb_button]
 
To Top

1951 CJ-3A Spring Glen, Ut $3500

• CATEGORIES: CJ-3A This site contains affiliate links for which I may be compensated.

Check out the unusual gas can carrier.

“For Sale: 1951 Willys CJ 3A, $3,500 OBO, has a rebuilt engine (approx. 4500 miles); hardened valve seats; rebuilt transmission (all new gears); new: leaf springs, non-directional tires (1000 miles) and carburetor ; rebuilt starter; boiled out radiator; converted from 6 volt to 12 volt; all new clutch, windshield, speedometer, gas tank and battery. Also included: oil filter, radiator hoses, gaskets etc. Needs master cylinder and possibly wheel cylinders (both provided new in box), exhaust pipe and muffler could be replaced (rusty), emergency brake could be adjusted.
435-472-0947 Between 9 am and 7 pm.”

http://provo.craigslist.org/cto/2146336509.html

[fb_button]
 
To Top

1950 CJ-3A Colfax, Ca **SOLD**

• CATEGORIES: CJ-3A • TAGS: This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was $4900

(07/09/2010) This looks good .. I love the rims.

“1950 Willys Jeep CJ3A, 350 Chevy engine, automatic transmission, overdrive, power steering and power brakes, winch, 11″ brakes, hubs, long travel suspension, new wiring, roll cage, stock axles. New steel body, so it has no rust and no bondo, nice clean jeep ready to go. Runs and drives excellent, easy to drive. A lot of Jeep for the money, this is a great buy. – $4,900.00. ”

[fb_button]
 
To Top

Builds – Gerald’s Brother’s 1 Year Build

• CATEGORIES: Builds, CJ-3A, Features This site contains affiliate links for which I may be compensated.

On New Year’s weekend last year, Gerald and his brother towed home a Craigslist find.  One year later, they are almost done with a great looking budget build.  Gerald tooks some pics and tells the story.  Thanks guys — and I agree with you on those tires.  They look great!

Gerald writes, This started as a Craigslist ad for a 1948 Willys CJ-2A basket case.   He wanted alot more, but after a month of trades and low balls he took the 1000 dollars offer for the lot. Much of the dirty work was done and lots of parts were included.  The jeep finally arrived home over new years weekend, January 2009.

Gerald_Brother1jpg

Gerald_Brother2

Because we didn’t trust any of the work done thus far, our first task was to take it apart the rest of the way.  Once apart, we first focused on fitting the body correctly, which was a 10 + year old MD Juan generic (m-38 / mb) body, along with the stock hood and grill.   We also fabbed up a rear crossmember and hitch.

As we examined some of the running gear parts, we discovered the rear axle was shot (which we replaced from a spare beater jeep out back) and decided to add new 11 inch brakes for the front (from craigslist). The springs were new, so that saved time and money. We tore down the motor, transmission and transfer case to make sure they were in good shape, and then refit them properly to the frame, including fabbing up some motor mounts.

Then, we went to work on the roll cage, which was partially built out of some bar from our old family jeep along with some new tube. After we got everything mocked up, we tore it back apart to get ready for painting.

Gerald_Brother3

Gerald_Brother4

There was stripping and sanding, more stripping and sanding, and then, finally, we sprayed it a deep blue.  We took the time to paint the underside of the body first, along with many of the parts. Then, we assembles the body to the frame and gave it a final coat.

Gerald_Brother5

Gerald_Brother6

Gerald_Brother7

Next came the small stuff such as gauges, wiring, linkages, fuel system, windshield and exhaust.  BTW, I have never seen a head with a fixed rear outlet.  Does anyone know if this could be from a truck?

Gerald_Brother8

One of the most critical steps occurred this week, almost one year from the start date of the project:  The Jeep gets the right set of wheels and tires.  As you could see in the earlier pics, the jeep came with some new tires, but we felt they weren’t right (700 15), so my brother sold them on Craigslist.

Instead, he went with these Interco Super Swamper Radials 265 80 16.  They are mounted on 8 inch wide alum wheels, which was another Craigslist find.  I think these are perfect tires for a Willys in my estimate.  He picked them up today in Wheeling, West Virginia, at National tire.

Gerald_Brother9

Gerald_Brother10

[fb_button]
 
To Top

1953 CJ-3A Petoskey, MI **SOLD**

• CATEGORIES: CJ-3A • TAGS: , , This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was $10,5000.

(10/12/09) Lots of mods on this flattie.

“1984 Buick V6, SM420 4 Speed manual, Dana 44 axles, Mosier shafts, 4:88 Spicer gears, Dana 18 transfer case, Detroit soft locker front & rear, new Painless wiring harness, t:h steering, power steering, 8,000# Warn winch, new Best Top, Newer 35″ GY Wranglers, 4 wheel disc brakes, racing buckets seats w/ Simpson belts, Tuffy console, CD, original steel body w/ fiberglass hood, $10,500. Miller’s US 31 Sales, north of town,”

1953_cj3a_petoskey

[fb_button]
 
To Top

Builds: Chad’s Ford Model A Roadster PU Willys

• CATEGORIES: Builds, CJ-2A, CJ-3A, Features, Unusual, Willys Wagons • TAGS: This site contains affiliate links for which I may be compensated.

Here’s a wonderful build, an experiment by a reader named Chad.  He wanted to know what a Ford Model A Roadster would look like if Willys built it. So, naturally, he built one himself!

He writes, “Did all of it myself except the upholstery, in my home garage. It’s got a flathead V8 for power and took between 6 and 8 years start to finish. The dDrivetrain is flathead V8 adapted to a C-4 automatic adapted to Dana 18. Front axle is Dana 27 w/Corvette discs….rear is Dana 44 with one piece axles and Lock-rite geared 4.27.  I thought maybe it would be a four year job, but stuff happens  and there was a whole lot of headscratching to make things look ‘somewhat factory’. I used as many factory parts as I could but not necessarily the way they were used ‘by the factory’…..(those are Jeepster tailights, but they aren’t mounted that way on a Jeepster, just as an example).”

Great work and thanks for sharing!

frankie

frankierear

interior

engine

[fb_button]
 
To Top

1950 CJ-3A Sullivan, MO **SOLD**

• CATEGORIES: CJ-3A • TAGS: This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was $1100.

I can’t tell much from the pic.

“jeep has had f-head motor from cj3b installed sometime in past,starts and runs,rest of running gear appears original, has metal hardtop which looks to be of same age as jeep with rollup windows, the frame is solid as is top,body is rusty .this is a project that is not road ready,glass is gone brakes don’t work,transmission and transfercase do work,i have a title,would be a good start to add a new body but i have to many projects,i took it on trade and don’t need another project(the doors are laying inside)”

1950_cj3a_sullivan

[fb_button]
 
To Top

1950s CJ-3A Gaithersburg, MD **SOLD**

• CATEGORIES: CJ-3A This site contains affiliate links for which I may be compensated.

UPDATE; **SOLD** Was $600.

Those appears to be the mudflaps hanging from the back.

“NO TITLE, Serial Number 88306, Drive train is fine (axels, trans, engine, brakes, transfer case) has PTO with no lever or propeller shaft. Good oil pressure. Set up to simulate an MB. 60+ year old Body is far from perfect. 8 inch wide wheels with dry-cracked tires. Good to run on a farm or for hunting and trail riding. Mud Flaps & Tow bar goes with. Must go soon. Advertised locally. Drive it on your trailer and get back home to have some fun. $600”

1950s_cj3a_gaitherburg

[fb_button]
 
To Top

1951 CJ-3A Atlanta, Ga $13,500

• CATEGORIES: CJ-3A • TAGS: , This site contains affiliate links for which I may be compensated.

Just one pic of this nice looking jeep.

“Total restoration of a Painted RED 1951 CJ3A Willys Jeep with correct seats, front and rear, covered with black vinyl. This Jeep has a rebuilt 4 cyclinder engine, transmission, 4-wheel drive, front and rear axles, locking hubs, rebuilt steering column, new steering wheel, new tires on the orginal rims. It also has new wiring harness, new springs front and rear with new shackles, new king pins, new gas tank, and a new exhaust system. Orginal type bumper hitch, new brake lines, shoes, master and wheel cylinders, brake drums turned, new orginal type tail lights, add on turn signals, all new rubber items around the windshield and gommets, orginal step plate for both sides. Orginal type oil filter and oil bath air cleaner, all new dash gauges, vacuum wiper. This Jeep has a 12 volts electrical system with alternator. Over 15,000 invested, not counting labor completed myself. This is a real eye catcher with a beautiful refinish. Its a real show car. Will sell for 13,500, contact me by email @ wrnew1937@bellsouth.net.”

http://atlanta.craigslist.org/nat/cto/1520506955.html

1951_cj3a_atlanta

[fb_button]