UPDATE: **SOLD** Was $4000.
May be worth a look. No description.
Needs some work.
“I have a ’59 CJ3B with 350 swap. Frame is boxed to accomodate the weight and power of the V8.
Trans: SM420 granny ~7:1
T-Case: D300 ~2.5:1
Wide track CJ7 axles (D30/AMC20 w/ chomoly 1 piece shafts) Locked front and rear
33″ BFG KM2’s with less than 500 miles on 4 and 1 never on the ground
3″ lift springs in front and spring over
YJ springs spring over and ruffstuff mounts in the rear to match front lift and stretch rear about 5″ (stock 80″ WB now approx 85″)
Bad: fuel pump needs to be replaced (will fix for the right price prior to selling)
driver locking hub grenaded on my last trip wheeling
both clutch and brake master cylinders need to be replaced as well (pressure rods failed in both)
rear brakes could probably use new shoes”
No pics provided.
“Posting for my father. 1956 Jeep CJ3B Flat Fender. He Has owned it since 1966. Been parked on blocks in his garage for a few years. He was gearing up for a rebuild, when we had a few family tragedies, and a he suffered some health issues. Has New Tires and Wheels. Needs a fuel tank. Seats have seen better days. But overall it is in pretty good shape for a 60 year old jeep. Has the F134b Motor. Still set up for 6v. It is basically unmolested. Ran when parked. No Low ballers.”
UPDATE: Still Available.
(01/24/2015) Doesn’t have a standard windshield.
“EEP 57 ‘4X4 MOTOR 350 V8 AUTOMATIC TRASMITION LLANTAS NUEVESITAS, LISTO PARA OFF ROAD, CORRE MUY BIEN, ACOMPANADO DE SUS FLOWMASTER Y HEADERS VALE LA PENA LO TENGO EN $8500 A TRATAR NO SE VAN A REPENTIR”
UPDATE: **SOLD** Was $5500.
(01/08/2014) “Own a piece of history. This is one of the original Jeeps. This is what the Wrangler and the CJ7 and CJ5 were created from. It’s a CJ3B frame and F-head “Hurricane” engine under a CJ2A body using a 3″ body lift. It has been garage stored for the last 12 years after the rebuild. The soft top and doors are included. Also, comes with a Factory Service Manual”
The dash has been altered.
“1965 CJ3B Jeep 4×4 8,000 lb. PTO driven wench 31/10/50 tires brand new wind shield 235 Buick V6 motor brand new shocks all around runs and drives great”
UPDATE: **SOLD** Was $1750
It’s a project.
“1962 Willys CJ3B high hood in original condition. Motor runs, needs brakes to be driveable. Needs floor pan repair in the front floorpan.
Has Ramsey PTO winch, and clear Oregon title.
Asking $1750.”
UPDATE: **SOLD** Was $18,495
(09/18/2014) Nowhere in the ad (that I could find) does it mention this is a custom body.
“1954 Willys Jeep CJ-3 High Hood
134cu 4 Cylinder Engine
Fully Restored
Rare High Hood
New Soft Top
Stainless Steel Trim
Roll Bar
Rear Seat
3 Speed Transmission with OverDrive
4 Wheel Drive
Please if you have any question at all, feel free to email me or give me a call at anytime.”
UPDATE: **SOLD** Was $2500.
(11/26/2014) It’s a project.
“1953 willys, v6 buick conversion, factory pto installed. Project, hard top included.
obo, trades welcome. must move soon. relocating.”
Has some good updates. May be a good price.
“4” lift, 35″ tires, Danna 44 rear and Danna 30 front positraction. 231 Buick V6, SM420 4 speed transmission with granny gear. Includes 8000 lb Wench not in picture. Tow bar. Runs great. Could use new tires.”