DJ-3A Research Archives

DJ-3A, DJ3a

To Top

1956 DJ-3A/CJ-3A Kennewick, WA $3750

• CATEGORIES: CJ-3A, DJ-3A This site contains affiliate links for which I may be compensated.

UPDATE: Still Available.

(01/14/2019) Looks like a DJ-3A convertible body on a 4WD chassis.

https://www.facebook.com/marketplace/item/383595465780568

“1956 Willys CJ3A Jeep 350 Chevy engine 4 speed Saginaw transmission Dana model 18 transfer case WARN hubs Limited slip front differential 5.38 gears 33 inch Buckshot tires Power steering GM tilt steering column”

1956-dj3a-cj3a-kennewick-wa1 1956-dj3a-cj3a-kennewick-wa2 1956-dj3a-cj3a-kennewick-wa3

[fb_button]
 
To Top

1962 DJ-3A Grove, OK $6000

• CATEGORIES: DJ-3A • TAGS: This site contains affiliate links for which I may be compensated.

UPDATE: Still Available. It has some EasyLok hubs.

(10/19/2018) Looks like the same one sold in 2015.

https://www.facebook.com/marketplace/item/1878828475561089

“I have an old Jeep with a straight 6 Ford motor in it. I have recently replaced the battery, spark plugs, coil, distributor, carburetor, fuel pump and filter, and ignition switch. It fires right up first try. It has four wheel drive with locking front hubs. Everybody who see it says it’s a collectors item. It has a three speed transmission in the floor. It runs and drives. It’s very loud on the inside. The back opens up and locks into place and the doors will come off. One of a kind. Brand new tires. All lights and turn signals work the way the are supposed to.”

1962-dj3a-grove-ok1 1962-dj3a-grove-ok2 1962-dj3a-grove-ok3 1962-dj3a-grove-ok4

[fb_button]
 
To Top

1960 DJ-3A? Mansfield, TX $7500

• CATEGORIES: DJ-3A This site contains affiliate links for which I may be compensated.

UPDATE: Still Available.

(12/02/2018) Seller indicates the body is a 1947, but it looks more like a DJ body to me. This could be a modified DJ-3A.

https://www.facebook.com/marketplace/item/251727108857767

“Jeep Willys For Sale $7500 in Granbury Texas Buick V6 Dauntless 225, SM420, Dana 18 with Warn overdrive, Front Spicer 25 with disc brake conversion, Rear Dana 44, 5.38 gears, 32″ Goodyear MTR Kevlars, suspension seats. Vehicle is titled as 1960 Willys. The tub is a 47, windshield and front clip are CJ3A according to the previous owner. Please keep in mind this is an older Jeep/Willys. It runs great but they require TLC.”

1960-dj3a-mansfield-tx2 1960-dj3a-mansfield-tx3 1960-dj3a-mansfield-tx4

[fb_button]
 
To Top

DJ-3A Chassis Saratoga Springs, NY **Status Unknown**

• CATEGORIES: DJ-3A This site contains affiliate links for which I may be compensated.

UPDATE: **Status Unknown** Was $275.

(11/08/2018) Looks like a good price. Still has some hard-to-find parking brake parts.

“Willys DJ3A chassis, four lug wheels, two wheel drive, will also fit 1940’s thru late 50’s Willy’s cj2a, cj3a, and cj3b. Asking $275,”

dj3a-chassis2 dj3a-chassis1

[fb_button]
 
To Top

1957 DJ-3A Pine Valley, CA $7500

• CATEGORIES: DJ-3A This site contains affiliate links for which I may be compensated.

UPDATE: Still Available.

(11/06/2018) This DJ was converted to 4WD.

https://sandiego.craigslist.org/esd/cto/d/1957-willys-dj-3a-4×4-conversion/6769025334.html

1957-dj3a-pinevalley-ca41 1957-dj3a-pinevalley-ca42 1957-dj3a-pinevalley-ca43 1957-dj3a-pinevalley-ca4

“An east county San Diego Jeep since it was brand new. This is the “Dispatcher” model, that was originally sold as a 2wd.

This Jeep was professionally converted to 4wd with surplus military M38 parts by Border Parts in Spring Valley. Saginaw steering, Dana 25 front axle, Dana 44 rear, Dana 18 transfer case, and a T90 transmission with Borg Warner overdrive completes this rock-solid suspension and drivetrain conversion.

The engine is a 1964 Ford 260 cid V-8 out of a Fairlane. Engine routinely starts on first crank. A new ring gear on the flywheel, new starter and new clutch were recently installed by Action Cylinder Heads in Santee.
Continue reading

[fb_button]
 
To Top

1956 DJ-3A Jersey Village, TX $1500

• CATEGORIES: DJ-3A This site contains affiliate links for which I may be compensated.

Gayland shared this ad. It has no engine and the seller had begun converting it to 4WD. Looks to be 56337 10588 (I have DJ-3A #10538).

https://houston.craigslist.org/cto/d/1956-dj-3a-jeep-roller-no/6732338028.html


1956-dj3a-jerseyvillage-tx0 1956-dj3a-jerseyvillage-tx1

“For sale is a rust free 1956 DJ-3A. This vehicle was a barn find. I had the only rust spots repaired already. I am open to offers on this Jeep, their are many additional parts / extra parts that come with this jeep.

Frame is straight. I have slowly been buying new parts for this. I have a new front bumper and some other parts. The rims are correct for this jeep, the tires are just old tires to move it around.

I have the hood, windshield, fenders, grill, extra hubs, brakes, tire carrier, and most of the interior. No motor, tranny, or t-case but I know where you can get them in the area. Jeep was originally a 2wd. I have the correct axles to make this a 4wd.”

[fb_button]
 
To Top

1965 DJ-3A Friday Harbor, WA $2500

• CATEGORIES: DJ-3A This site contains affiliate links for which I may be compensated.

No pics provided. It’s a project.

https://seattle.craigslist.org/sno/cto/d/1965-jeep-project/6756379168.html

“This is a project I picked up earlier this year. It is titled as a 1965 DJ3A and shows 55K miles. I believe it was a hybrid built for the UN. The chassis and undercarriage is military with 4wd, pintle hitch and bumperettes. It has been modified with a Chevy 283 that starts and runs good. The body is enclosed like the mail jeeps but this was never a mail Jeep. It needs brakes on all four wheels. It was a driver at one point long ago but a previous owner started to change out the brakes and it was never finished. It has oversized wheels and tires to make it a roller. Wheels and tires could be easily sold. I am downsizing and need the room. A great fun project for someone.”

[fb_button]
 
To Top

1956 DJ-3A West Haven, CT eBay

• CATEGORIES: DJ-3A • TAGS: This site contains affiliate links for which I may be compensated.

UPDATE: Back on eBay. Starting bid is $1300

View all the information on eBay

“First year Dj3 in outstanding original condition. Jeep currently runs and idles very well. Jeep does have its cosmetic issues and some rot here and there as evident in the photos. The Fuel tank and lines will need cleaning and possible internal coating of tank (I have it running on a test tank). Motor runs very well with no signs of issues. Radiator holds and cycles coolant. Brakes will need attention.

The body is very solid. The original fiberglass top is in great shape.

Very close inspection after much insight given by those whom have DJ-3A`s of their own has revealed that the frame is most likely that of a CJ-2A.  From information given to me and very careful cleaning of the upper frame area located in front of the body gusset on the right side of the jeep….there is no number stamped in the frame that I can see to denote it is a matched frame and body..”

1956-dj3a-westhaven-ct03 1956-dj3a-westhaven-ct02 1956-dj3a-westhaven-ct01
1956-dj3a-westhaven-ct1

Continue reading

[fb_button]