Features Research Archives

To Top

My Build — Fixing a Power Steering Leak

• CATEGORIES: Biscuit, Features This site contains affiliate links for which I may be compensated.

One of the minor fixes on my list of things to repair (a never ending list it seems) was to replace the seals on the input shaft of my power steering unit to stop a small fluid leak.  At $15 (from my local NAPA dealer) for replacement seals this is an inexpensive fix. So, to make the fix more interesting, I taped my efforts for your viewing amusement and edification.

 
To Top

Dana 20 with Dana 18 gears rebuild

• CATEGORIES: Biscuit, Features, videos This site contains affiliate links for which I may be compensated.

A couple weeks ago, after finally ordering and receiving my Bronco Dana 20 rear sliding gear, I got my Dana 20 with 2:46 ratio Dana 18 gears put together.  I decided to videotape the build and despite a few setbacks (such as trying to install the wrong dana 18 intermediate gear) I got everything together.

The video is hardly a complete document on how to rebuild a transfercase properly.  Clearly, I won’t be quitting my day job to go into TV!  However, I hope it’s educational and a little amusing.


A few related links:

This is a low resolution video, but is still 49mb.  It runs approx a half hour.

 
To Top

Digitized Drawing

• CATEGORIES: Artists/Drawings, Features This site contains affiliate links for which I may be compensated.

This is a drawing a Boeing co-worker of dad’s drew of and for him many years ago (in the 80s I believe). We believe the artist was Bill Mandeville or Manderville (dad can’t quite remember any more).

 
To Top

Dad’s First Jeep – CJ-2A (And Jim Carter’s first roll)

• CATEGORIES: Features, News This site contains affiliate links for which I may be compensated.

Every once in a while my dad will start talking and he'll talk about some event in his past I knew nothing about.  You'd think, for example, that I would have known my dad's first vehicle was a jeep — a CJ-2A — he got it when he was 16 as his first car.  But, no, today was the first day I've heard of it.  There are several reasons for this, mostly, I suppose, having to do with our father/son dynamic.  Though I wish I had heard about some of these stories earlier in my life, there is something nice about continuing to hear new stories.

As dad tells it, the year was 1949 and he was 16, living with his parents and two brothers in Holladay, Utah, now just a suburb of Salt Lake City.  The city of Holladay is south of Salt Lake City, laid out underneath Olympus mountain.  When dad lived there, off of Walker Lane, there was only wasatch blvd and 5000 vertical feet between his house and the top of Olympus mountain.  Now, I-215 with its six lanes of traffic has added a much bigger divide between the two.  Of course, there are many more houses and fences in the way as well.

One day, Dad decides to take his jeep and 5 passengers jeeping up the hill towards the base of Olympus Mountain.  Today this area is known as Olympus Cove, but at the time, I'm sure it was the great unknown.

As best I can interpret from Dad, he was driving his CJ-2A with his brother B.B in the passenger seat, and four other kids in the back (one was his other brother Tony and one was Jim Carter).  Dad was driving very slowly, crawling along when his left front wheel started over a bump or rise.  As they slowly moved forward the rise grew, shifting the jeep slowly toward the passenger side until the jeep tipped over onto the passenger side, dumping the four kids in the back onto the ground.  Miraculously, the jeep didn't tip all the way over and hurt anyone severely.  The worst damage was to Jim Carter, who suffered a cut on his knee or leg. Apparently, Jim fell the furthest, I guess he must have been on the driver's side back wheel well (dad couldn't quite explain this to me — sometimes dad's stroke makes these explanations more difficult).  

After getting off the ground and checking out the jeep, they decided to tip it back onto its wheels and head back home.   

Whatever physical damage the semi-roll caused Jim Carter, I guess he must have enjoyed himself, because he became a life long jeeper, a jeep club co-founder with dad, jeep racer, and President of the PNW4WDA for a year.  Perhaps we should all fall out of a jeep 🙂

 
To Top

Early MB Mods — The SAS

• CATEGORIES: Features, MB, Website This site contains affiliate links for which I may be compensated.

From day 1, adapting the jeep was a necessary part of using or owning one.  In my mind, this is one of the attributes of jeeps that differentiate them from most other vehicles, even from other 4x4s.  Andy Carter highlights early desert modifications in this story with pictures from jeeps used in Africa by the British Special Air Service (SAS) during WWII.  Check out the grille in the picture on the right.  If you read through the site, you'll note that this was a modification done to many of the jeeps, not just this one. They look like a boxer who has been through a few rounds!

Here's an excerpt from the website about SAS Jeeps:

"The jeeps were stripped of all non-essential parts including the windscreen, most of the radiator grille bars and even sometimes the front bumper to increase the effective load carrying capacity of the vehicle. Thus the large amount of fuel and water needed for fast long-range raids could be carried avoiding the need for slower support vehicles. A water condensing unit was fitted to the front to reduce loss from the radiator which would otherwise have had to be topped up from the limited drinking water supplies…"

Learn more at Andy Carter's Military Jeep Pages 

 
To Top

Builds — Bumble Bee

• CATEGORIES: Builds, Features This site contains affiliate links for which I may be compensated.

Louis Dawson recounts, in this four page article on code 4×4, his 12 year building process for Bumble Bee, a 1947 CJ-2A.  Started as a restoration project, Louis discovered he'd rather focus on trail performance.

Louis sums up the experience with the following quote:  "Our ensuing 12-year restomod of "Rumble Bee" includes a huge amount of fun, plentiful stupid and expensive decisions on my part, and a final result that retains the flat fender look and feel, while being competent and safe enough on the trail to peg the fun meter. This "retro" project includes little of the latest tech — it's mostly older solutions that reached their peak a number of years ago, but it works."

On additional feature I like is the "what we did right" and "what we did wrong" on page 4 of the article.

Read the entire article and see the pictures. 

 
To Top

Mini-Jeeps

• CATEGORIES: Features, Unusual, Website This site contains affiliate links for which I may be compensated.

UPDATE:  It appears east coast mini classics is no longer making the mini jeeps shown below. they can be found occasionally for sale on Craigslist. 

http://www.eastcoastminiclassics.com/

LargeLF outside Dan 1

LargePICT0033

\LargeIM000812

 
To Top

Builds – 1951 m38 Glendale, Az on Ebay — The Rhino Hunter

• CATEGORIES: Builds, Features, M-38 • TAGS: This site contains affiliate links for which I may be compensated.

This build is for sale on eBay.  There are plenty of pics.  Note the m606 in the background of one of the ebay pics.

“This is a really unique combination of old and new and we’ve had a ton of fun in it. This rig started it’s life as a military M38 until the previous owner started modifying it as a back country rock crawler. When we got it, it had wasn’t much to look at, was missing a windshield but ran and drove so well we had to have it. It is heavily modified to be a safe, comfortable, go anywhere ride. We call it The Rhino Hunter as it has effortlessly shamed a few ORVs in the mud and rocks…”

 
To Top

Builds – a Build from the MYCJ3A.com website

• CATEGORIES: Builds, Features This site contains affiliate links for which I may be compensated.

Many of you may have seen this site already, but if you haven't it's a treat.  The author nicely details the experience of rebuilding his titled 1953 CJ-3A (which he discovers to actually be a CJ-2A).  One of the more interesting details, to me anyway, was his write-up of the swing pedals.  This is the first time I have seen these type of pedals (in my 1st jeep I used a swing pedal set from a Vega — with significant mods — and in my current jeep I've modified a set of pedal set from a jeep cherokee.  

See all the different pictures and write-ups at the author's website (The author never mentions who he is)

 
To Top

Rebuild in Ohio — from offroaders.com

• CATEGORIES: Builds, Features This site contains affiliate links for which I may be compensated.

mike-cj3aHere is a rebuild from Ohio as seen on offroaders.com.   It’s a very nice, clean rebuild that resulted in a playful looking flatfender. The before picture is on the left and after on the right.

Mike writes, “The Jeep had a rough  life for some 8 years wheeling the local 4×4 haunts of southern Ohio and it was looking pretty rough and was needed some serious TLC. In early 2005. I stripped it down to the frame and this is the end product after nearly 2 years work.

SEE THE FULL WRITEUP FROM MIKE AT OFFROAD.COM

mike-cj3a6

mike-cj3a2