Willys Wagons Research Archives

Willys Trucks

To Top

1954 Jeep Willys Wagon $7,000 Milford, NY

• CATEGORIES: Willys Wagons This site contains affiliate links for which I may be compensated.

1954 Jeep Willys Wagon $7,000 Milford, NY

Andy’s Picks

https://www.facebook.com/marketplace/item/1073429054208651/?ref=saved&referral_code=null

Wagon with rounded wheel wells. I scratched my head for a day or two, now I see the bodywork on the rear quarters…

Information from seller:

’54? Willy’s, located in MILFORD, NY; no paperwork; runs, original running gear and rims; 6-226 engine; new wheel cylindars and master cylindar; original rocker panels Doesn’t charge, needs front floor pans, floors never been patched; interior not done; driver’s side window cracked. I prefer you call with questions or clarification: [hidden information]

 

[fb_button]
 
To Top

Willys Jeep Traveller Roof Rack $1,000 or OBO or Trade Spokane, WA

• CATEGORIES: Parts, Unique Jeeps, Willys Wagons • TAGS: , This site contains affiliate links for which I may be compensated.

Willys Jeep Traveller Roof Rack $1,000 or OBO or Trade Spokane, WA

This was posted on OWF by a member who ran across this and was going to use it for a build but these are special to the 4WD Traveller model that was used more as a transport and was a mix of a Wagon, Parkway Conversion had Barn Doors and round wheel wells. They are a really neat model of Willys. Pair them up with the 230 and these are really cool rigs, so only fitting that someone who could maybe use this for their build has a shot at it.

Both of my Wagons are ’63 and have the lower ribbed roof, the Delivery would have used the tall non ribbed roof, so before you toss some Willys Bucks at this beware, you probably need to have at least an older pre 1958 Wagon with the tall roof. I would be very intrigued to see if Willys did any support under the roof for the Traveller model, or if it was all on the design to push the weight to the sides as shown.  I’ve cleaned my roof a few times and it’s really fragile up there, I really have to take care not to put any kind of real pressure on the roof in general. Not sure on the other roofs, let me know if they are that much stronger.

Or if you have a Traveller and can take some shots of the inside roof where this would go on a 4WD Traveller that would help.

Here is the go to thread on all things Traveller on OWF.

https://www.oldwillysforum.com/forum/index.php?threads/1960-1964-5-willys-traveller-general-thread.19204/

Information from seller:

I have a rare Traveler Edition roof rack I was going to use on my build, but it should really go to a restoration of an actual Traveler Jeep Willys Wagon. 1000 obo, or let’s trade… (for some Jeep parts: 1949-50 Jeepster hood W/ bar ornament, Jeepster grill insert/overlay, 1949/50 Jeepster flat-style front fenders) Zip code 99206

https://www.facebook.com/share/19jQaR1FnG/?mibextid=6ojiHh

[fb_button]
 
To Top

1946-1950 Willys Jeep Delivery Hood with trim $140 Effingham, IL

• CATEGORIES: Parts, Willys Wagons This site contains affiliate links for which I may be compensated.

1946-1950 Willys Jeep Delivery Hood with trim $140 Effingham, IL

Has a good looking hood spear, was added to with something but really nice looking, hood prop rod and parts there, badges, straight piece for sure.

Information from seller:

Part of my dad’s estate. Appears to be an original hood from a Willys Jeep Delivery panel wagon. Believed to be for some 1946, 1947, 1948, 1949, and early 1950 models. Referred to as a 4750, from what I’ve gathered. It needs restored but is in solid condition for the year. See the pics. Missing the hood ornament (sphere?) but has the chrome center strip and both side badges, although they are all pitted. I’ve received conflicting info on the hood ornament. One person said it was an option and another said it was aftermarket. I can’t find any pics online showing one, so maybe it was an add-on by a previous owner. Either way, it’s missing now. Pickup in Effingham, IL. (No shipping unless you arrange it and pay for the hood in cash/Venmo first.) FCFS and cross posted.

https://www.facebook.com/share/15rkwwh14Q/

[fb_button]
 
To Top

1960 Willys Wagon $2,500 Roan Mountain, TN

• CATEGORIES: Willys Wagons This site contains affiliate links for which I may be compensated.

1960 Willys Wagon $2,500 Roan Mountain, TN

Andy’s Picks

https://www.facebook.com/marketplace/item/1214157717119851/?ref=saved&referral_code=null

maybe a good wagon project to resume

Information from seller:

1960 willys project. 2wd chassis. Clean title. Have the windows and bumpers. I do have the hood. Sitting on a chevy truck frame with a 350 engine. Engine did run but hasn’t been touched since my grandpa passed away. Will consider trades. I need it gone.

[fb_button]
 
To Top

1967 Jeep Panel Wagon Audio Visual Unit $5,000 Dayton, OH

• CATEGORIES: Willys Wagons This site contains affiliate links for which I may be compensated.

1967 Jeep Panel Wagon Audio Visual Unit $5,000 Dayton, OH

This has been posted on eWillys before and has floated around a few times, looks like a neat project.

Andy’s Picks

https://www.facebook.com/marketplace/item/1050567136487129?ref=saved&referral_code=null

panel delivery audio visual

Information from seller:

1967 Jeep panel wagon audio visual Jeep. Original engine, 3 speed column shift, non running but engine turns free, some rust but overall solid. This is a project. Rare rear barn doors. Rare and hard to find. Listing for a friend I can put you in contact with them if you’re interested! Thanks

[fb_button]
 
To Top

1962 Jeep Wrangler LJ / Willys Project $4,000 Maryville, TN

• CATEGORIES: Willys Wagons This site contains affiliate links for which I may be compensated.

1962 Jeep Wrangler LJ / Willys Project $4,000 Maryville, TN

Andy’s Picks

https://www.facebook.com/marketplace/item/2526783294349708?ref=saved&referral_code=null

panel delivery wagon bodyswap project

Information from seller:

Hate to do this, but need to move my Willys body swap project on. Body: 1962 Willys Panel Wagon, 2wd with title. Originally a Sherwin Williams delivery vehicle in Hickory, NC. Has some rust, but floors are very solid. Rockers are good. Cool barn doors in the rear. No engine or trans. Rolls and steers. Frame: 2006 Wrangler LJ, 4.0-liter inline six cylinder engine, six-speed manual transmission, four wheel drive. Engine runs, trans and transfer case shift. Drove it into the shop before pulling the old tub. I have the complete, uncut body wiring harness from the LJ along with the steering column and pedal assembly. Only selling because I found the CJ5 I’ve been looking for and would rather focus my attention there. Feel free to reach out with any questions. Not really looking for trades. Please be respectful of my time and I will be respectful of yours. Thanks for looking!

 

[fb_button]
 
To Top

1958 Willys Wagon Body $2,995 Renton, WA

• CATEGORIES: Willys Wagons This site contains affiliate links for which I may be compensated.

1958 Willys Wagon Body $2,995 Renton, WA

Andy’s Picks

Wagon body

Information from seller:

All parts sand blasted. All parts except body powder coated. Includes all complete sheet metal. No frame. No trades.

https://www.facebook.com/marketplace/item/1276934634038540/?ref=saved&referral_code=null

 

 

[fb_button]
 
To Top

1956 Willy’s Jeep Panel Full Set of Original Seats $650 Hanover, PA

• CATEGORIES: Parts, Willys Wagons This site contains affiliate links for which I may be compensated.

1956 Willy’s Jeep Panel Full Set of Original Seats $650 Hanover, PA

Little high for me on the price due to the condition shown, and I’m more in the camp of Yes they need recovering! But they are available if you need a set and don’t want to travel and may need these for your project.

Information from seller:

Original metal seats in very good shape. Could use recovering.

https://www.facebook.com/share/14DPeEEbihW/

[fb_button]
 
To Top

1952 Jeep Willys Wagon $1,500 Berryville, VA

• CATEGORIES: Willys Wagons This site contains affiliate links for which I may be compensated.

1952 Jeep Willys Wagon $1,500 Berryville, VA

Cool roof racks, ready to be put back to work! Might be a little bit of a Willys Salad here with the later grill and the sort, but  I think we are more in the ’57 or ’58 range due to the roof style, gauge hole, and split windows in front and rear. I think ’52 is too early for this one. Priced to move on to it’s next adventure.

Information from seller:

1952 Willy’s station wagon motor runs just been sitting super hurricane flat 6

https://www.facebook.com/share/16j4ceBpvX/

[fb_button]
 
To Top

1949 Willys Jeepster Parts and More Welland, ON

• CATEGORIES: Jeepster, Parts, Transmissions, Willys Trucks, Willys Wagons This site contains affiliate links for which I may be compensated.

1949 Willys Jeepster Parts and More Welland, ON

There are a bunch of Jeepster and Willys Parts on a few listings, so if you need something maybe reach out and see what’s up.

1949 Willys Jeepster Rear Axle CA$200 Welland, ON

Posted as a Dana 23 out of a Jeepster, 4.88’s (39/8) which typically match up to the 226 it looks to have had in it so might be some R/P parts here, used gear sets can be tricky to set up, but axles look to be there, some backplates. Most used axles I have picked up are in this price range or slightly lower so its not priced way out there either.

Information from seller:

Axle came out of a 1949 Willys Jeepster, both sides spin freely. Dana 23 I believe. 39/8 tag reads. Have not taken cover off. Pick Up ONLY

https://www.facebook.com/share/1FqG5NssML/

Willys 1949 Jeepster Original Radio CA$1,700 / USD$1200

Information from seller:

When I bought my Jeepster this came with it, I did not install, did test it and light came on and all dials work. 6v, Guy said it was rebuilt. Comes with the Jeepster correct dash cover. Thats all I can tell you. Pick up In Canada 40 mins from Niagara Falls NY boarder/ Fort Erie boarder. Will ship with exact purchase price and Ins. for customs. $1200.00 US or $1700.00 CAD

https://www.facebook.com/share/14Hibop1RTx/

Jeep/Willys T-90 Transmission Case Housing CA$1 

Information from seller:

Willys/Jeep T-90 transmission case, no chip/cracks, all screw hole threads intact. Take your pick. These have the screw holes for the oil slinger. All so have internal used parts. US funds paypal AS IS I can ship might be a little heavy on shipping cost.

https://www.facebook.com/share/1EUjuBgNYN/

Willys wagon rear license plate assembly CA$80  

Information from seller:

Willys wagon rear license plate assembly, basical all there needs attention. $80.00 plus shipping from Welland Ont. I added LED light on inside to my bracket, works better then original 1156. Also included is plexy glass for lens cover, to be modified.

https://www.facebook.com/share/1Ankh1UaLF/

Probably will do some more from Canada lots of neat stuff posted.

[fb_button]