Could be a good price.
https://www.facebook.com/marketplace/item/2451035458297369/
“4th ’49 Jeepster made. 85,000 miles. Original floor boards very very minor rust. Runs great! New brakes. Fun to drive and gets lots of thumbs up”
Could be a good price.
https://www.facebook.com/marketplace/item/2451035458297369/
“4th ’49 Jeepster made. 85,000 miles. Original floor boards very very minor rust. Runs great! New brakes. Fun to drive and gets lots of thumbs up”
UPDATE: Price dropped to $4800.
(06/17/2019) May have an f-head.
https://www.facebook.com/marketplace/item/602524426991177/
“My dads old Jeep runs and drives new seats and fuel system m38 original military have clean title in my name ”
Lots of mods to this jeep. The rear PTO bar has been accessorized a bit.
https://www.facebook.com/marketplace/item/472667696982553/
“OR SALE 1948 WILLYS Solid starting point for a PROJECT. 283 with LT-1 intake, advance adapter headers, advance adapter side pipes, 2 piece scatter shield, Muncie 4 speed, warn overdrive, Dana transfer case, custom built front and rear drive shafts, Dana front with a DANA 60 rear (yes that is a 1 ton rear end) end both sporting 5:38 gears. Locking hubs on the front. GM steering box and column, Hurst linkage, 2 10 gallon fuel tanks. Sand roll bar with a full cage. Same owner since around 1979. I wanted to rebuild it to it’s former glory but just don’t see it happening.”
I believe this pic was taken prior to disassembly.
https://www.facebook.com/marketplace/item/2470755753241277/
“951 M38 Willy’s Military Jeep. It has been converted to 12 volt. I have taken this down to the frame and started to put it back together. It ran and drove before my restoration began. I have lost interest in the project. It has a: Buick V6 even fire out of an early Grand National (better than the odd fires) Dana 27 front axle Dana 44 Rear axle Brand new Rancho 2.5 inch lift kit with new leafs and shocks Muncie SM420 4-speed T-18 Transfer case (brand new adapter from Novak) Super Swamper 32.5 inch tires (5 of them) Front Disc Brakes Power Steering
Parts that come with it: New wiring harness New gauges 4 New Hummer seats, cushions and seat belts Soft top with doors (old has some holes) Aluminum radiator and electric fan Brand new heater All the brass placards for the dash Roll bar New brake lines Many many more parts. All the parts are there to get it back on the road. It is currently on a DJ-5 frame which is 3/4 of the way boxed in, the original frame will come with it also if looking to restore back to original. You will need a trailer to pick this up and a way to haul all the parts. It’s registered non-op and has original CA black lic plate.”
UPDATE: **SOLD** Was $3250.
There’s plenty of work to be done on this wagon. I just liked the old lettering along the side. The hood has the pre-war W-O design on it.
“For sale 1947 willys jeep overlander. No motor or trans. Asking 3250.00 obo make a great project. Has tenn title”
Runs, but not road worthy. Has Suzuki Samurai axles.
https://www.facebook.com/marketplace/item/552624562252854/
“Note: … It Runs now. Still nds work but moves under it’s own power! if u see this ad, YES its available. ….47 willys jeep, Cj2a. Awesome shape, see pix, no rust bucket here! Has tasteful mods. But not hacked apart like most. Original flathead 4cyl. Engine. Samurai axles, disc brake front. 4″ superlift springs, Gm tilt column, 12v conversion. Was a great ol’ huntin rig. Got put in barn for last 5 to 7 yrs. Got it running still needs dialed in. So No u can’t *drive it home sorry. Have clear title in hand. Price is $3900 cash only, no trade. Go see the rest and you’ll realize its a good deal on this 1! Bring trailer and cash if u want to check it out.”
UPDATE: Still Available? This is still listed on Facebook.
(08/06/2019) This is a definite 80’s throwback build. The diamond-plating, the engine selection, the high-back bucket seats, and the bobcat hood were all popular northwest mods.
https://www.facebook.com/marketplace/item/497639894112432/
“Thinking about selling my 1951 Willy’s, it has a 151 iron duke 4 cylinder Chevy engine with a 3 speed manual, power steering and a Chevy tilt wheel, 33×13.5 R15 TSL boggers that are almost, new shocks, a 9,000 lb winch, comes with soft doors and soft top, it needs some minor things here and there, but it runs and drives, looking to get 5,500”
Not sure how much value is here.
https://www.facebook.com/marketplace/item/1539220572891825/
“Project jeep. 1951 flat fender willys. Toyota rear ends, 4.3L v6 engine. 350 turbo tranny automatic. 209 transfer. Mileage is unknown, just picked a number for the listing. Owner doesn’t have time for a project. Open to trade for cows, 4 wheelers, what else you got?”
For decades car makers have used hubcaps as a way to promote their brands, so it’s not surprising that Willys-Overland and Willys Motors also did that, specifically with W-Os and Ws. Now, I’m most definitely no hubcap expert, but I’ll take a stab at this anyway based on some Google searches (what could go wrong with that?).
In Willys-Overland’s case, one of the earliest examples of the W-O branding appearing on a hubcap was this 1932/1933 Overland 8-88s:

From this page: http://www.wokr.org/gallery/wil_hc_09.htm
By 1939 (possibly earlier), the Willys-Overland sedan was sporting a more familiar arrangement, a large W over a broken O:

This 1939 sedan has a set: https://www.mecum.com/lots/AN1116-260766/1939-willys-overland-sedan/
Based on that hubcap, we can also date the original version of this sign, which pops up on the internet quite frequently, to the late 1930s:
In 1940, Willys changed it up to show WILLYS in all caps:
For the 1941 Willys Americar, the company created a much fancier hubcap:
(This is an extension of the hubcap post above, but also covers how the angular W was used in other ways)
In 1952, Willys-Overland introduced the Aero line of cars. They sported a new hubcap that featured only the W, along with a W on the front of the car and Willys script along the side.
The hubcap would be used throughout the Aero car line for the next four years.

Note that this May 03, 1952, ad from the Evening post includes the Jeep logo and the new angled W logo for marketing purposes. The anglular W logo would end up on the front of Aeros, on the covers of a variety of documents as well, such as parts catalogs.
The 1952 Mechanic’s Manual below shows how the W logo was used on covers.
This page is from a 1952 owner’s manual; it demonstrates that the Willys-Overland Export Company had already been formed by 1952, so it was a pre-Kaiser creation.
Here’s a good shot of the angular W on the grille on they 1952 Aero Ace. Note the Willys script logo along the passenger side fender.
In 1954, I’m sure just to make my life documenting hubcap history more difficult, Willys introduced a new hubcap with a circle around the W on the Willys Aero Ace. What other models may have sported this hubcap I couldn’t say:
Also, in 1954, Willys offered a dual concentric circle hubcap, a design used later on the Surreys (Galas) starting in 1959. However, these were all red. The one below looks like it could have been an aero cap:
In 1955, Willys Motors introduced the Willys Bermuda, which sported a brand new hubcap design:
The Aero cars were discontinued in 1955, with some (or all) tooling eventually shipped to Brazil. The angular W logo would mostly disappear after 1955, but a few ripples remained. For example, the plain W re-appeared on the DJ-3A hub caps starting in 1956,
Sometime after 1959, with the introduction of the DJ-3A Surreys (and Gala’s for export), Willys re-introduced the concentric circle W hubcap design:
I doubt that this is a complete list of Willys-related hubcaps or of the angular W, so I welcome corrections for those that know more about this than I do!