No pics provided.
“1946 Willys CJ2 jeep. Needs full restoration. I have put new brake lines, brake cylinders, motor mounts and done some work to the frame and chassis. Mostly disassembled right now. Buyer must pick up.”
No pics provided.
“1946 Willys CJ2 jeep. Needs full restoration. I have put new brake lines, brake cylinders, motor mounts and done some work to the frame and chassis. Mostly disassembled right now. Buyer must pick up.”
UPDATE: Still Available. Was no price. Now $800.
(09/02/2015) No description or pics.
UPDATE: **SOLD** Was $5000.
(05/25/2015) “willys mb , not all original parts,motor is an m38 engine,drive train t84 transmission,dana18 transfer,dana 27 and 25 axles,floorboards are hand crafted and does not have well for gas tank,seats are hand made close to original,gas tank is square body about 8 gallon capacity..instruments in the dash work except for amp gauge, but runs and drives”
Colin bought a Hickey aluminum cylinder head to modify his 1960 Surrey, but ran into some problems with it. Below he describes the changes he made, the problems he encountered, and his current solution. Thanks for sharing Colin!
I started a hop-up project on our Surrey that involved the installation of a 1950s Nick Hickey aluminum cylinder head for the L-134. That morphed into the fabrication of a dual carb setup using two intake manifolds with a balance tube an F Head exhaust manifold that a very good friend, Steve Mason, and I fabricated out of an old manifold supplied by Jim Sullivan.
The first issue was the two new Weber carbs. They were supposed to be synchronized and jetted the sam, but weren’t. That led to the rear carb dumping extra fuel into #s 3&4, resulting in a blown head gasket which dumped coolant into those cylinders.
Hickey head top and bottom.
Took it all apart, rejetted the carbs and had the head resurfaced. I finished buttoning everything up and fired it up. adjusted the carbs slightly, running smooth, then noticed coolant in the #2 spark plug recess. Shut it off, pulled all plugs, could see coolant in #2, and steam coming from what must be a crack in the threads.
When I had the engine running previously I did not have water pooling in the plug basins. Upon looking at the plugs, the electrodes indicated the possibility of them coming in contact with the valves. Took a very hi intensity flashlight and looked into the cylinders and at least two of the valves I saw the imprint of the electrode on the valves.
So my theory is this:
I had the head resurfaced and in that process, the machine shop used an epoxy to smooth the surface indentations( corrosion?), and then did the resurface. The plugs I had used were nearly new from the original head. Those electrodes did not extend into the combustion chamber. The machine shop( guys who do a lot of work on Ford V8s with aluminum heads told me to get plugs with a slightly longer shank for better combustion. So I did. Only a small imperceptible difference in length.
Can’t say I ever tried this.
“You are bidding on an original press photo of Marvin Bud Ward Golfing Off Jeep Hood Dutch New Guinea WWII. Photo has waving due to too much glue being used to attach the information sheet onto the back of the photo. If the listing shows thin red and/or green lines, they are the result of a bad scan & the lines are NOT on the actual photo. Photo measures 7 x 9 inches and is dated 10/7/1944.”
Looks like a good price. Has some unusual bumpers.
“Rare 1970 cj6. Original 4cyl. 3sp. Great condition. Runs and drives. New tires. Soft top included. $4500 obo.”
UPDATE: **SOLD** Was $2800.
Looks like it has value.
“1942 Willys Jeep.
All original with the exception of a few things.
Needs a restoration.
Clear title.”
UPDATE: **SOLD** Was $11,500.
Looks nice.
“6 cylinder 3 on the tree overdrive newer top . side curtains ever thing works may trade for?”
UPDATE: **SOLD**
Seller provides videos and a link with more pics.
“This jeep is titled and registered (historic) in the state of NJ as a 1945 Willys MB. It was originally made by Willys for the US Army during WWII. Sensible, conservative frame-off resto in 2012. Starts, runs, shifts, steers, and stops great. No excessive smoke or leaks, no popping out of gear, and no rust. Primed with Rustoleum red oxide and finished with three coats of Gillespie 319. New repro (Beachwood OD 3) canvas seats. This is not a trailer queen. Turns heads in parades, at car shows, or as a daily runabout from April to October. Stored in heated garage on trickle charger every winter. If you’re a military buff, this jeep is ready for the hood and bumper stencils of your choice. If you just like old jeeps, this is the very first production model of the vehicle Enzo Ferrari called “America’s only true sports car.”