UPDATE: **SOLD** Was $4500.
Seats are rough, but looks pretty stock.
“Still has all of the original ID tags, will need minor attention from sitting.”
UPDATE: **SOLD** Was $4500.
Seats are rough, but looks pretty stock.
“Still has all of the original ID tags, will need minor attention from sitting.”
UPDATE: **SOLD** Was $1200
Runs and plows. Might be a good price.
“Listing for the owner of this Jeep..This one runs good …You have enough time yet to get this boy in shape for more work plowing driveway. Jeep is too rough to restore but frame looked solid and this one has Title…etc
The owner of this Jeep has a Car Trailer as well and can Drop in your Driveway for a FEE..FYI
New radiator was $300 and Tires were $200 not long ago.
This Jeep had a V8-304 and three speed manual and seemed to run good before it clunked out..:D”
UPDATE: Was $6000 **SOLD**
(01/28/2014) It runs and drives. It looks great on the outside, but the interior could use some cleaning.
“I have a classic Willys Wagon that I had shipped out here from Chico, Ca.. Was my Grandpas hunting wagon. Has Chevy inline 6(250), 700r4 od trans to stock spicer 18 tcase (4×4). This is setup for driving to the lease, titled and tagged. Has a winch( not hooked up), pick,shovel, gun racks…. I drive it around town, people love it. Driver door window glass is cracked, few dents and a little rust( not much). Pretty original, unmolested Jeep with some drivetrain upgrades. 5:38 axle gears, so 60 mph even with overdrive, but rides nice for a classic. Needs to be restored to be perfect or drive as is. Only interested in trades right now, NOT for sale. 72 or older Chevy or Gmc truck, Camaro, Chevelle roller project, other Jeeps, lowered rides like Silverado… What ya got? Lookin’ around 6 grand for trade.”
Look good.
“Full set of 15 x 8.5 Dodge turbine wheels. Fits 1980s Dodge Rams, Ram Charger, Jeep, and some older Ford Broncos. 5 x 5.5 bolt pattern.
**PICK UP ONLY-NO SHIPPING**”
Parts jeep.
“1948 Willys CJ2
CJ5 Chassis
283 Motor – Turns over by hand
33×12.50 Tires
Great Starter Project
Clean TITLE
Motivated Seller”
No pics provided.
“All parts motor rebuilt frame and front and rearends and brakes and lines all rebuilt. .body off ..have all parts plus extra.can send some pice if requested.”
UPDATE: **SOLD** Was $12,500
(11/01/2014) Needs some work.
“THIS IS COOL HOW MANY 1965 CJ FIVES CAN THERE BE WITH LESS THAN 5,000 MILES? THIS ONE IN A EQUIPMENT SHED, RUNS GOOD , NO BRAKES YET, THIS FOR THE COLLECTOR OR MUSEUM THAT WANTS AN ORIGINAL WILLY’S CJ-5 WITH FACTORY JEEP-A-TRENCH ATTACHMENT, PURCHASED FROM THE FAMILY OF THE ORIGINAL OWNER, NO RUST ON THIS JEEP FACTORY TOP SINCE NEW,”
UPDATE: Still Available
(10/31/2014) The builder extended the front clip to accommodate the longer CJ-5 chassis. Runs.
” have a 52(?) CJ-3b sitting on a 72 CJ-5 running gear. Due to an upcoming move, I just don’t have time for another project…
It has a strong running 360(AMC), three speed manual, D44 rear and I really don’t know what the front axle is. Maybe a D20?
It has a good soft top, and a Bikini top. It also has a tow bar on the front, and is wired for being towed…
It has a full cage, bucket seats and 2 point race belts. I’m thinking it was built as an ice racer, ’cause it just has that look, but not sure.
This would make a great Ice Racer, or Crawler project, or…?
Has a clean Colorado title(as 72 Cj-5)”
UPDATE: **SOLD** Was $1500.
(10/04/2014) It’s a stretched body.
Willys Fiberglass Drag Jeep Body
Has been widen & extended
Approx: length 122in. (10ft. 2in) width 60in. (5ft.)
Would make a great sand drag jeep / dune jeep / rock crawler”
UPDATE: **SOLD** Was $8000
(03/06/2014) This CJ-10 has been kept in good shape.
“Selling a Willy’s Jeep C-10a Custom Spray Rig. You will not find one like this, one of a kind. This is a CJ10a tug with less than 3000 total produced. It came from factory with a ¾ ton front axle and a 1 ton rear axle. It has a great running six cylinder Nissan Diesel Engine (from factory) with a 727 Heavy Duty Automatic Transmission. This was originally an small and light airplane tow truck. We added a heavy duty bed, diamond plate, front weight, Schaben spray unit with a 5 HP Honda motor. Has all electric actuators to raise, lower, and adjust the spray booms. Currently has (2) broadcast nozzles in the rear, spray wand, and all electric controls and gauges inside. Sets on nice flotation tires that have a great amount of tread. Too much too list.”