To Top

1959 DJ-3A Acworth, GA **SOLD**

August 10, 2009 • CATEGORIES: DJ-3A This site contains affiliate links for which I may be compensated.
0

1959_dj3a_acworthUPDATE: **SOLD** Was $1500.

This might be a very good deal.  Note: the engine needs work..

“You are looking at a 1959 Cj-3a. Body is in good shape..there is a new gas tank, fuel pump, coil-over shocks and other small items. I have the frame for the top which will go with the jeep. It needs seats..( I do have the frames that was in it when I bought it ) .. The original 134 L-head engine is complete but does not run…it will turn over. It has a bad rod..but it is an easy rebuild..All parts can be bought from Turner 4-Wheel in Canton.  This is a great restorable jeep or a great hunting jeep. All the electrical works and the 4-wheel drive works. For you jeep guys—–it is a 1959 body..looks like a DJ though..but it is on 4-wheel chasis. The vin # is a ’59 DJ.. look at the pics”

[fb_button]
 
To Top

1952? CJ-2A? Calhan, Co $1500

August 10, 2009 • CATEGORIES: CJ-2A, CJ-3A This site contains affiliate links for which I may be compensated.
0

1952_cj2a_calhanThis appears to have a CJ-3B windshield with a CJ-2A body and maybe a CJ-3A title?

“1952 Willys jeep. Would be a great project or hunting vehicle. Runs but needs a new carb. Has recently been converted to 12 volt. Has the flat head 4cly.(go devil)? Comes with tow bar and tows great. The jeep has some rust and holes but could be patched. Comes with a hard top also, and a extra military hood. I am in the process of working on this jeep so price is, as is right now. Call Chuck 719-243-3425”

http://cosprings.craigslist.org/cto/1315703037.html

[fb_button]
 
To Top

1948 CJ-2A Olathe, CO **SOLD**

August 10, 2009 • CATEGORIES: CJ-2A This site contains affiliate links for which I may be compensated.
0

1948_cj2a_olatheUPDATE: **SOLD** Was $3500.

It appears in decent shape.

“CHECK THIS OUT. 48 WILLY’S CJ2A, 4X4 , 4 CYL., STICK. RUNS GOOD BUT BODY NEEDS A LITTLE TLC.”

 

[fb_button]
 
To Top

1945 MB Micanopy, Fl $3200

August 10, 2009 • CATEGORIES: MB This site contains affiliate links for which I may be compensated.
0

1945_mb_micanopyThis MB appears in good shape, though I can see some body dents.  I think it has a CJ-3B windshield though.

“1945 military Willy’s jeep. 4-cylinder motor. some rust. runs great. clear title. all original. painted military drab. new windshield. with military tires. David Escalera- (352)538-9761”

http://gainesville.craigslist.org/atq/1314279962.html

[fb_button]
 
To Top

1948 CJ-2A Whittier, CA **SOLD**

August 10, 2009 • CATEGORIES: CJ-2A This site contains affiliate links for which I may be compensated.
0

1948_cj2a_whittierUPDATE:  **SOLD** Was $4000.

Something is collapsing in the middle of this jeep — either the frame or the front of the body.

“Buick V6 all Edelbrock performance parts. fully locked up, free floating hubs, cb radio, safari top and full top included, removable tow bar, back seat. runs good. WIll take any reasonable offer!!!! Cash only..”

[fb_button]
 
To Top

Bender, Notchers and a Roller

August 9, 2009 • CATEGORIES: News This site contains affiliate links for which I may be compensated.
1

harbor_freight_tubing_rollerToday I ran across an Harbor Freight Ad for a tubing roller for only $139.  That got me wondering if I could use that for bending too.  So, I went did some searches on the HF tubing roller and read some pretty postive reviews for it in a variety of forums.  That said, the bending radius is too big for rollcage angles and corners in most cases.

So, I did some additional looking around at low priced benders and notchers.  As I went, I recorded some sites that I felt others might be interested in looking at.

One of the more interesting tidbits I found was a Tubing Coping Calculator that creates a 2 dimensional cutout for tracing around a tubing (in place of a notcher).

Building your own — Free plans:

Tubing benders:

Tube Notcher:

[fb_button]
 
To Top

1946 CJ-2A Glidden, Wi eBay

August 9, 2009 • CATEGORIES: CJ-2A This site contains affiliate links for which I may be compensated.
0

Check out this old hand winch.

“This is a great restoration project for the right person in the (JEEP WORLD). It is an all original 1946 willy’s. It has the floor shift T-90 transmission, original dana hi-lo transfer case and the L-134 flat head four cylinder 60 hp Go-Devil engine.(It also has an ALLSTATE cab on it.) The bad, I do not have the title for it, but will give bill of sale to the one who wins this 1946 CJ2A, which are getting really hard to find. Thanks for looking and happy bidding.”

View all the pics on eBay

1946_cj2a_glidden

[fb_button]