To Top

1960 CJ-3B Elkin, NC eBay

• CATEGORIES: CJ-3B This site contains affiliate links for which I may be compensated.

1960_cj3b_elkinThere’s some rust on the body, but this looks like it’s a very stock, quite complete CJ-3B.  It might make a great restore project.  Note the other flattie to the right in the pic.

“This is a Willys cj3b jeep that I bought with the intention of restoring. I do not have a title for this vehicle. I will give a bill of sale. I believe this jeep could be restored. The running gear is complete. I have not tried to start the engine. I believe this jeep was used as a plow jeep. It does have rust mostly in the back sections. It has a factory hard top that is solid, and could be brought back to like new condition. It would make a great restore project.”

View all the pics on eBay

[fb_button]
 
To Top

1947 CJ-2A Buffalo, NY **SOLD**

• CATEGORIES: CJ-2A This site contains affiliate links for which I may be compensated.

1947_cj2a_buffaloUPDATE: **SOLD** Was $7400.

“I purchased the Jeep in August of 1997. It already had the small block Ford in it but was just sitting in outside storage here for years abandoned. Loved it at first sight. I tracked down the owner and made him an offer after I changed the oil, put a new battery in and fired it up. It just purred. I put in my garage until about 2000. That’s when my father in law gave me a nice place to work on it…. “

[fb_button]
 
To Top

1942 MB Burlington, WA **SOLD**

• CATEGORIES: GPW (Ford MB), MB This site contains affiliate links for which I may be compensated.

UPDATE:  Was $1500. **SOLD**

This MB comes with a brand new body.  The rest of the parts appear to be a bit rougher.

“Project jeep includes rolling frame, original 4 cylinder engine, extra front end. Engine ran when parked. This is a project! Please, serious buyers only. We are not willing to trade.”

[fb_button]
 
To Top

1957 FC-170 Apache Junction, AZ **SOLD**

• CATEGORIES: FC150-FC170-M677 This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was $2500

(10/01/09) It’s a bit rough.

1957 Willys Jeep forward control. has Ford v-8 runs needs plugs wires, rotor. body is rust free and fairly straight. $2500.00.”

1957_fc170_apachejunction

[fb_button]
 
To Top

1961 DJ-3A Arvada, Co **SOLD**

• CATEGORIES: DJ-3A • TAGS: This site contains affiliate links for which I may be compensated.

1961_dj3a_arvadaUPDATE: **SOLD** Was $12,000

“This Jeep has been 95% restored. All the mechanics was done by Edgewater Jeep and the paint was done by Sunshine Custom Paint. All the chrome was done by Collins Custom Plating (including the pot medal) and there is a lot of chrome including engine parts. This is a great Jeep to have. It is 2WD (not 4WD) drive. The Jeep has “3 on-the-tree”, left hand seating. This is NOT a postal Jeep. It has the “I” beam front axle, which is the old school Jeep”

[fb_button]
 
To Top

1952 CJ-3A Penn Valley, Ca $1600

• CATEGORIES: CJ-3A This site contains affiliate links for which I may be compensated.

1952_cj3a_pennvalleyThe paint job makes it difficult to tell, but it looks like the side panel on the driver’s side is a bit rough (rust?) at the bottom edge.  The top sure fits funkily …

“Great 4×4 vehicle! This Jeep has a v8 small block 283 2bbl carb. 1,600.00 obo for more info call(530)432-9277 (ask for steve) or e-mail sjdana@live.com”

http://sacramento.craigslist.org/cto/982923519.html

[fb_button]
 
To Top

1948 CJ-2A Birmingham, Al $3500

• CATEGORIES: CJ-2A This site contains affiliate links for which I may be compensated.

1948_cj2a_birminghamThe body looks wee bit rough, but it sounds as if the drive train will get you where you want to go.

“Its a 48′ Willys CJ2A that has the following: Full roll cage, RCI 5 pt. harness with seats, and quick release steering wheel. The engine is a chevy V-6 4.3 with power steering and 3 speed tranny. The suspension is Rusty’s leafs and shocks, around 6″ of lift. Front axle is a Dana 30 with super lift hubs and rear axle is AMC 20 with 1 piece axle shaft. Both have 4.88 gears and lockers. It has 4 wheel disc breaks, steel braided lines, and custom drive shafts…”

http://bham.craigslist.org/cto/983015882.html

[fb_button]
 
To Top

1964 CJ-3B Susanville, Ca $900

• CATEGORIES: CJ-3B This site contains affiliate links for which I may be compensated.

1964_cj3b_susanvilleHere’s a project CJ-3B.  The pics don’t really show enough to know if this is a good deal or not.

“Selling my project 1964 cj3b. All parts are there and its all original except seats and wheels. No body rot but needs some sheetmetal work.Contact Scott@ (530)257-3630. $900.00 OBO”

http://reno.craigslist.org/cto/984123927.htm

[fb_button]