To Top

1948 CJ-2A Birmingham, Al $3500

January 7, 2009 • CATEGORIES: CJ-2A This site contains affiliate links for which I may be compensated.
0

1948_cj2a_birminghamThe body looks wee bit rough, but it sounds as if the drive train will get you where you want to go.

“Its a 48′ Willys CJ2A that has the following: Full roll cage, RCI 5 pt. harness with seats, and quick release steering wheel. The engine is a chevy V-6 4.3 with power steering and 3 speed tranny. The suspension is Rusty’s leafs and shocks, around 6″ of lift. Front axle is a Dana 30 with super lift hubs and rear axle is AMC 20 with 1 piece axle shaft. Both have 4.88 gears and lockers. It has 4 wheel disc breaks, steel braided lines, and custom drive shafts…”

http://bham.craigslist.org/cto/983015882.html

[fb_button]
 
To Top

1964 CJ-3B Susanville, Ca $900

January 7, 2009 • CATEGORIES: CJ-3B This site contains affiliate links for which I may be compensated.
0

1964_cj3b_susanvilleHere’s a project CJ-3B.  The pics don’t really show enough to know if this is a good deal or not.

“Selling my project 1964 cj3b. All parts are there and its all original except seats and wheels. No body rot but needs some sheetmetal work.Contact Scott@ (530)257-3630. $900.00 OBO”

http://reno.craigslist.org/cto/984123927.htm

[fb_button]
 
To Top

MD JUAN — Jeep Restorations in the Phillipines

January 5, 2009 • CATEGORIES: Body Parts, stainless/jewels This site contains affiliate links for which I may be compensated.
2

mdjuan_logoA reader sent me to a Craigslist-like website for the sale of all kinds of items in the Phillipines (I’ll save that discussion for a post tomorrow).  Along the journey, I came across the website for MD JUAN, a Phillipine based company that some of you are probably aware of that does jeep restorations and supplies parts to resellers all over the world, including North America.

So, it’s clear that at least some jeep body parts are being exported from the Phillipines into the United States through 5 different US Resellers.  Moreover, the company has been in business in some fashion since 1967, so it’s been doing it a while.  So, perhaps there is some way to work with those importers to bring in stainless body parts (for those interested in non-Jewels stainless)?

Also interesting, MD JUAN sells 1945 MBs.  No price is listed, however they do include an email address.

md_juan_frontpage

[fb_button]
 
To Top

1964 CJ-3B Ridge Farm, Ill eBay

January 5, 2009 • CATEGORIES: CJ-3B This site contains affiliate links for which I may be compensated.
2

1964_cj3b_ridgefarmThis looks like a nice straight, non-abused CJ-3B.

” 64 CJ3B with all factory stock drivetrain.  134 F-Head Engine.  Gears are 4:27 ratio.  WITH 31,013 ORIGINAL MILES.  Everything works with the exception of emergency brake and gas gauge.  There is no top with this Jeep.  The Jeep Runs and Drives EXCELLENT!  I have added a Rancho 2 1/2 inch lift with Ranch R-S 5000 Shocks.  Tires are Interco Super Swamper TRXUS radials mounted on what I believe are vintage Jackman 15X10 Wheels.  Alson has new factory style exhaust system.  This is a very quiet, very solid Jeep CJ.  The body has 2 small rust holes on the lower right body tub…”

View all the pics on eBay

[fb_button]
 
To Top

1949 CJ-3A Mountain Grove, Mo **SOLD**

January 5, 2009 • CATEGORIES: CJ-3A This site contains affiliate links for which I may be compensated.
0

1949_cj3a_mountaingroveUPDATE:  This sold for $4,995 on 01/11/2009 on eBay.

This CJ-3A only reached a high bid of $3,550 during the last auction attempt. I was a little surprised by that, but it’s also not been restored to ‘original specs’.  It looks nice and is back on the auction block.

“1949 CJ3A in extremely good condition.  It has be in body off restoration for 13 years striped to the frame.  It had the usual rust in the floor pans, new steel was welded in these areas. Also new under body rails were welded in. The frame was in good shape and the floor and the rear fender well are in good shape.  After the body tub was completed and before installed on the frame it was completely undercoated with a rubbery undercoat. Both front and rear axles were completely disassembled and rebuilt….”

View the many pics on eBay

[fb_button]
 
To Top

1958 CJ-3B Uncasville, CT $3000

January 4, 2009 • CATEGORIES: CJ-3B This site contains affiliate links for which I may be compensated.
0

1958_cj3b_uncasvilleAll original CJ-3B with rebuilt engine. The body appears a bit rough in the pics and there appears to be rust along the passenger side.

“1958 CJ-3b Willys Jeep. Engine rebuilt Spring 2002. All original, what you see is what you get. Needs engine tune-up, ran when garaged. Body needs work. Tires are 33 x 12.5 BF Goodwrench MT’s- not new condition. Is a great trail vehicle, or a great restoration project. Serious inquiries only. Price negotiable. Must sell, moving soon. ”

http://newlondon.craigslist.org/cto/978670083.html

[fb_button]
 
To Top

1953 CJ-3B Beaverton, OR **SOLD**

January 4, 2009 • CATEGORIES: CJ-3B This site contains affiliate links for which I may be compensated.
0

UPDATE: **SOLD** Was $4500.

No obvious issues with this CJ-3B.

“1953 WILLYS JEEP RUNS GREAT! WARN HUBS, WARN WENCH, SOFT TOP W/DOORS GREAT CONDITION. NEW SEATS WITH EXTRA SET OF NICE WINTER COVERS. 15″ STEEL WHEELS W/32/11-50/15 TIRES. BURGANDY PAINT. NEW PARTS INCLUDE: SPRINGS, BREAKS, CLUTCH PLATE, BERRINGS, REAR MAIN SEAL, FRONT COVER SEAL, BATTERY, STARTER/SELINOIND, IGNITION, PAINLESS WIRING, CIRCUIT BREAKER, DISTRIBUTOR, PIONTS, CAP, WIRES, PLUGS, CARBORATOR, GAS TANK, SENDING UNIT, ELECTRIC FUEL PUMP, AND FUEL LINES. GREAT DEAL”

[fb_button]
 
To Top

1944 MB Port Angeles, Wa eBay

January 3, 2009 • CATEGORIES: MB • TAGS: . This site contains affiliate links for which I may be compensated.
0

1944_mb_portangelesThere’s been a variety of updates to this MB, including the rear bumper, the later model windshield, the radiator, the wiring and more.  I’d have to agree with the seller that this might make a good platform for a restoration project based on the pics.

“This is a 1944 Military Jeep delivered June 12, 1944. The original zinc dash plaques match the frame serial. The engine serial is 3J50087. I do not know for sure if it the original engine for certain. It has been converted to 12volt. I started working o this Jeep in 2003. Since then I have installed, rebuilt, or replaced the following.—Engine gaskets, timing gears, mounts, radiator, belt, hoses, coil, plugs, distributor, carberurator, and air duct. Brakes, changed to 11″x2″ duo-servo shoes, hoses, steel lines and switched to dual reservoir master cylinder. Locating it in the stock location with a kit from ATV, retaining the stock pedals. Front axle, wheel bearings, seals and nuts, spindle bushings, steering bearings and felt seals, inner and outer axle seals….”

[fb_button]
 
To Top

1947 CJ-2A Pennsylvania **SOLD*

January 3, 2009 • CATEGORIES: CJ-2A This site contains affiliate links for which I may be compensated.
0

UPDATE:  **SOLD** Was 46800

“This is the second year of production for the first model of the civilian Jeep produced after Wold War 2. It has the 4 cylinder engine, 3 speed transmission, hi/lo range and 4 wheel drive. Optional equiptment includes a back seat, radio, heater, defroster fan, lock out hubs and overdrive. The overdrive offers the flexibility of 12 forward speeds. This Jeep has the original type top, no rust anywhere and is mechanically excellent.”

[fb_button]