To Top

1946 VEC CJ-2A Kansas City, Mo eBay

September 28, 2008 • CATEGORIES: CJ-2A • TAGS: , . This site contains affiliate links for which I may be compensated.
0

If you are looking for an early CJ-2A, this has got some good elements, including the driver’s side cutouts, the column shifter, and a heater.  The passenger side fuel hole is interesting; I don’t believe that was stock?

“This early CJ-2A has an ID number of 16741.  It is a 3 speed on the tree.  It has a clear MO title. Below is the description: Motor – Org. 4 cylinder.  Just got back from machine shop.  All four cylinders were re-sleeved.  Crank was polished.  New pistons, valves, springs, etc  Everything still in boxes as you can see by the pictures. Interior – I have no seats. Does have a roll bar.  Floor is solid, except for the “bed”. It should be cut out and fitted with new metal.   Exterior – The only rust I can see is the passage side step. Some of the Hat Channel underneath will need to be cut (maybe 3 feet)  Tailgate is orginal, but is pretty rough.  I have no windshield and I don’t believe the hood is org. because there is no Willys stamped on it.”

[fb_button]
 
To Top

1963 CJ-5 Graham, Wa **SOLD**

September 28, 2008 • CATEGORIES: CJ5 • TAGS: , . This site contains affiliate links for which I may be compensated.
0

UPDATE: **SOLD** Was $4000.

This is a great looking CJ-5.  I suspect there’s a few additional upgrades on this jeep.

“1963 jeep willys 231buick v6 3speed with warn overdrive asking $4000”

[fb_button]
 
To Top

1951 CJ-3A Port Angeles, WA **SOLD**

September 28, 2008 • CATEGORIES: CJ-3A This site contains affiliate links for which I may be compensated.
0

UPDATE:  **SOLD** Was $1500.

“1951 willys CJ3-A project. Has rebuilt 2.8 liter ford v-6. I will try to post some pics. or can email pictures to interested buyers. I’ve had this jeep since 1987. I never seem to have the time and money @ the same time to fix it. Needs wiring, lights etc,,, I have access to a trailer and can deliver on the olympic or kitsap peninsula. $2995 OBO”

[fb_button]
 
To Top

1959 FC-150 Holly, MI eBay

September 28, 2008 • CATEGORIES: FC150-FC170-M677 This site contains affiliate links for which I may be compensated.
0

Looks like there’s the typical door rust.  However, it’s running and there is extra parts.

“This Truck is a 1959 Willy’s Jeep (Mileage unknown )it runs Good and has lots of extras that will go with it, Extra frame, Motor, Drive-train all in Good condition as well I assume although have never had time to rebuild. everything was bought with the intention of using as extra parts and the Jeep wont die.”

View all the pics on ebay

[fb_button]
 
To Top

1948 CJ-2A Payette, ID **SOLD**

September 28, 2008 • CATEGORIES: CJ-2A • TAGS: , . This site contains affiliate links for which I may be compensated.
0

UPDATE: **SOLD** Was $1500.

“I have a 1948 willys jeep with a flathed 4 it runs good drives good and looks good. no rust body is strieght.I asking 1500 for it or trade for a small car or pickup for same value.”

[fb_button]
 
To Top

1959 DJ-3A Sandy Springs, Ga **SOLD**

September 26, 2008 • CATEGORIES: DJ-3A This site contains affiliate links for which I may be compensated.
0

UPDATE: **SOLD** Was $3700.

Here’s an unusual find. It appears to be a pretty stock DJ-3A.  It looks to be in very good condition.  If it’s running and no rust, I’d say this is a great collector piece.

“1959 Willys Jeep. Antique. Hard top with sliding doors very rare. NOT A POSTAL JEEP. Has standard left hand drive. 3 speed on the column. Very little rust. Came from out west. 50,000 miles 4 cylinder flat head . New brake master cylinder.”

[fb_button]
 
To Top

Stainless Steel Willys Flatfender Body Moses Lake, Wa

September 24, 2008 • CATEGORIES: CJ-2A, CJ-3A, stainless/jewels This site contains affiliate links for which I may be compensated.
18

UPDATE:  I do not know whether this sold or not.  I’ll keep for historical purposes.

Obviously, these don’t appear every day.  Note that this one has been stretched 6 inches, which makes it ideal for placing on a CJ-5 frame.  It appears to have a solid back, like a DJ-3A.

“Very Cool!! RARE!! Stainless Steel Willys Jeep Body Hand built in the philippines in the 1970’s and was shipped to the states. Streched 6 in. in door & 6 in. Behind the rear fender. The Body will fit right onto a CJ-5 Frame It’s a Must sale for me… I simply need the money. “

[fb_button]
 
To Top

Puzzled about Brake Line Sizes

September 24, 2008 • CATEGORIES: Features, News This site contains affiliate links for which I may be compensated.
0

Once again, I’ve been searching the internet.  The newest quest for information involves brake line sizes.  Specifically, as I posted a few days ago, I pulled brakes lines and a combo valve from a late 80s Cherokee.

One of the things I didn’t realize initially was that the front brakes lines are 3/16″ while the rear line is 1/4″.  The question I had was, does that matter?  After some searching, I landed on the Hotrodders site where readers discussed this issue.  The nut of the discussion was that this should not be an issue and, in fact, has been done on many newer vehicles….

[fb_button]