These are two separate auctions, both involving the Mile High Jeep Club.
1942(?) Custom Jeep Bend, OR $1800
TJ shared this unusual-bodied jeep. It certainly could be an MB.
https://www.facebook.com/marketplace/item/3064870103786809
“Custom built body on Willys Jeep frame with Willys MB block with matching head. Check photos. No Title. Not running. Have tons of parts.Great and unique project. Lots of time and money. Shoot me an offer. Feel free to ask questions”
Toledo Stack Brick on eBay
Not too surprising, the cost of shipping ($16.10) is more than the initial bid price ($10).
“Listed is a rare #294 of 1000 Limited edition smoke stack brick from Willys Overland Jeep Chrysler headquarters in Toledo, Ohio. for those that don’t know. Willys Overland was known for their triple smoke stacks. This is number 294 of the 1000 bricks that were kept and auctioned off to help their local boy scout troop years ago when they knocked down the infamous stacks to build a bigger factory to build the new 4 door Jeep Wranglers. It’s a rare item! TY for looking!”
Jeep Pens and Pencils on eBay
Here’s a collection of jeep pens and pencils. There’s one Willys Overland Motors pencil, too.
1948 CJ-2A Test Drive Video
Here’s a video of a drive in a rusted CJ-2A. The driver made a few minor mistakes in describing it. At least he had fun driving it.
1974 CJ-6 Coudersport, PA $20,000
Marty shared this customized CJ-6. He confirmed this was built in Pennsylvania. Both rear axles are drive axles, though one new carrier bearing is needed. The large side windows suggest the Meyer hardtop was modified, too.
https://twintiers.craigslist.org/cto/d/coudersport-1974-jeep-cj-6×6/7433296490.html
“his is a 74 CJ5 extended to include a third axle. Runs rough at the moment but drives amazingly well. It is powered by a 79 small block 350 which makes this Jeep scream down the road. Very well built all original look steel interior and exterior no fiberglass. Has a stretched and modified steel hard top wrapped in vinyl and a steel half cap included but not in great shape. Also includes the tan bikini top for warmer driving. In the opinion of mine and others (mechanics) this is a very well built rig and can be left as is with minor work and still a one of one head turner in the world!! Needs a carrier bearing on the mid axle rebuilt to drive the rear axle and with that is a live three axle Jeep. Will consider trading for; Scouts, Range Rover, Land Rover, Land cruisers 43,45,or 47 Ford Bronco, Jeep CJ6, CJ8-Scrambler, pretty much anything old cool and definitely 4×4!”
2 1942 GPWs Kahului, HI $13,000
Not sure what the shipping would cost, but at least one of these drives.
https://honolulu.craigslist.org/mau/cto/d/kahului-1942-willys-jeeps/7437927561.html

“Two 1942 Willys Gpw Jeeps for the
Price Of One!!
One legal and runs great!
Other can be used for parts or also registered and restored!
Will consider selling separately..
Serious Inquiries only…
$13,000.00 for both or best offer”
1961 CJ-5 Hazel Green, AL $9500
Not sure about the price given it needs a tank installed, but there’s a lot of stock CJ-5 here for early CJ-5 lovers.
https://huntsville.craigslist.org/cto/d/hazel-green-1961-willys-jeep/7436796917.html
“1961 Willys jeep, 4 cylinder,3 speed. Fuel tank cleaned and lined, needs installed, big winch. Been sitting for a while but will start and run. Posting for my father-in-law. He ca answer any questions.”
Monroe 3-point Hitch Storrs, CT **SOLD**
UPDATE: **SOLD** Was $2750.
Ted’s got this Monroe 3-point hitch. He also has some housings and other pro parts.
“Up for sale or possible trade is a Willys Jeep Monroe Three Point Hitch or Hydraulic Lift Assembly. This is the last of a large collection of lifts that I’ve liquidated. This Monroe setup is in overall very decent condition for its age and mostly complete with the exception of the one small rear housing mount ( which I might be able to source by the time of a sale or trade) and the hydraulic lines which all guys usually have made new at any hydraulic line shop or even most Napa’s will make you new lines. All the other components of a Monroe lift are present including a few of the super hard parts to find like the original crank shaft driven pump and mount , center link and adjustment Plates.
I was lucky enough to find an original under body mount for these lifts and I had a few made from a Machinest friend of mine which will be included with all hardware to mount. Control Valve and tank assembly included as well as Monroe Lift housing with original ram ( all mounting tabs perfect) , leveling link, lift rods ,left and right lower lift arms, rear draw bar mounts etc. I will also include a copy of the master parts list for a Monroe lift Assembly and a link to an original Monroe operation and care Manual.
I have a few extra housings that may be available as well but no other extra small parts. Feel free to call or text with any questions or specific pic requests. I have sold four of these units recently all within the $2500-$3000 range depending on condition and completeness if lift.
1959 Wagon Marengo, IL **SOLD** Was $19,900
UPDATE: **SOLD** Was $19,900.
This looks in good shape.
“For sale 1959 4wd Willys wagon Jeep restored, with rebuilt 226 ci 6cylinder engine runs and drives (needs headliner)”






























