Needs some additional work.
https://www.facebook.com/marketplace/item/771037996710510/
“1954 Willys Jeep, CJ3B for sale. Need some work, but it runs and drives and has a clear title.”
Needs some additional work.
https://www.facebook.com/marketplace/item/771037996710510/
“1954 Willys Jeep, CJ3B for sale. Need some work, but it runs and drives and has a clear title.”
Thanks to Jim for spotting this one.
https://www.facebook.com/marketplace/item/470536770564722/
“1953 willyz cj3b. Fun driver in decent condition. Comes with soft top. Brakes, shocks, rear springs, gas tank, generator, and starter were all replaced about 5 years ago”
UPDATE: Still Available.
(01/12/2020) Jim spotted this partially rebuild tub.
https://dallas.craigslist.org/ndf/pts/d/denton-1958-willys-cj3b-jeep-body-tub/7053857591.html
“Partially restored 1958 Willys CJ3B tub.
Most of the rigorous work has already been done. There is still some metal work left, but 95% rust free at this point, and that’s before blasting! A ton of work has gone into this project so far and picking it up from this point should go smoothly in the right hands. It’s in great shape, no major issues that can’t be repaired easily. Please contact me if interested. Thanks for looking! I could potentially trade for other willys Jeep parts and attachments. Looking for: warn overdrive, Koenig PTO or crankshaft winch, military soft top and bows, Koenig hard top and doors, PTO gearbox, overdrive/PTO adapter, seat frames and cushions. If you have willys parts, let’s deal!”
UPDATE: Still Available. Has an overdrive.
(02/13/2020) The has likely had some bodywork. It appears to have a seat notch on the passenger side rear wheel well.
https://honolulu.craigslist.org/oah/cto/d/honolulu-1944-willys-jeep-4cyl/7216410044.html
“1944 Willy’s Jeep
Runs but gas tank needs cleaning
Papers in storage, Minor work to be done,
-New Carb
-New Brake Master
-New Fuel Pump”
UPDATE: **Status Unknown** Was $2500.
(01/31/2020) Has potential.
“All original, would be great for a restoration project. Was purchased with another CJ3B mid-restoration, thought I might need it for parts but would rather sell it and put the money toward my main project. Should run with a little time spent on maintenance. Would also consider trade for a Warn overdrive, large industrial air compressor, or other Willys Jeep parts/implements, (hard top, PTO winch, rear PTO transfer case, etc.) If you have Willys Jeep parts, let’s talk.”
UPDATE: Still Available.
(05/14/2019) Sounds like there’s some value here. Includes a new soft top, Koenig hardtop, PTO winch, and Warn overdrive.
https://denver.craigslist.org/for/d/como-willys-cj3b/7073093436.html
“2 CJ3B Willys jeeps
Both have V-6 engines – 1 215 Dauntless Buick, other Chevy 194
Many parts included
10k pto winch, new white soft top, Konig steel top, Borg Warner 98 4 speed, Warn overdrive, alloy wheels
scout disc front and limited slip rear (6″ wider)
lift kit on one, multi military on other
to many other stuff to list
Both are projects or one awsome build into one and a lot of sellable rare stuff left over”
UPDATE: Still Availalble.
(02/05/2019) Seller includes pics of the rebuild on the ad. Brakes need fixing.
https://www.facebook.com/marketplace/item/184099589344882/
“This is an original RARE 1961 Willy’s Jeep CJ-3B. The last of the flat fender. Frame off restoration, engine rebuilt, new transmission, new transfer case, new shift tower, new exhaust, new suspension, new battery, and so much more. Frame and body is coated with an expensive rust proof paint, then primed, and then final paint. My husband poured his heart, money and soul into this jeep, with intentions of keeping it forever. This is not an altered or modified jeep, it has been purposely kept original for value sake, which is what makes it so rare. He has kept all the replaced components and has invested over $15,000 into this, plus two years of his time and labor. Open to offers, but please don’t insult me, this is worth every penny. Need to sell ASAP thanks“
UPDATE: **SOLD** Was $11,500.
Has a variety of mods.
“CJ-3B, Bored Chevy 350 w/ Holley Truck Avenger carb and dual electric fans, SM 465 Trans, NP205 T-case, Dana 44 front on leaf springs w/ chromoly shafts and Detroit locker, stretched and solid axle 4-linked Ford 9” rear. 4:56 gears.
Has compressor, stereo, amp, sub, roll-bar speakers, rock lights, warn winch, inverter, heater, full soft top and bikini, hitch-mount rack for jerry cans and cooler. 38.5 TSL SX super swampers with disc brakes. Registered to be street legal.
This jeep is ready to go, only needs an oil change. Being an older jeep the interior is a little tight. Selling because I don’t use it enough and want a boat.
No Trades”
UPDATE: **SOLD** Was $4500.
May need additional work.
“1960 Willys Jeep in Good condition. Runs well with a rebuilt less than 2000 mile Hurricane F head engine With a new head installed and the block Magna-fluxed at the builderWestcoast engines in Oxnard CA. Radiator replaced with high-efficiency aluminum. The clutch replaced at the installation of the engine. Shifts and drives 4X4 operates as it should. Brakes are out but will be redone this week, brake cylinders and shoes plus anything else I find during inspection today. parts arrive Monday. I also am replacing the cracked steering wheel, horn and button to be determined.
Fuel system cleaned and oil changed as the jeep was sitting on my property for two years unused. I am negotiable on the price I am starting at the average I have seen them going for won’t charge any extra for the bullet hole. The more I improve the jeep the less negotiable I will be. I have many extra parts plus a complete engine, needs rebuild, Solex carburetor, odds and end’s that I would include with negotiation.
I just don’t have the time and ambition for this jeep, other projects I’d rather do.
Thanks for reading and I will update pictures as I go along.”
UPDATE: Price dropped to $3500.
(12/30/2019) It’s a project with an L-head in it.
https://nwct.craigslist.org/cto/d/readsboro-willys-1955-cj3b/7054627843.html
“WILLYS 55 cj3b. It runs,stops ,steers,new wiring,brake lines,leaf springs,master cylinder,rebuilt Ross steer box,rebuilt Bell hanger,new exhaust,new brakes,new carb,new battery,new gas tank and on and on.
The pics shown on the trailer is how I bought it.In pieces.The under carriage was suppose to have been done,with plr.I paid 2800. FOR it.It wasn’t as stated underneath.Replaced all springs and hangers because they were rusted shut.Steering box was shot so I paid 100.00 in parts for new bearings and sector shaft.Bell hanger was unserviceable and replaced. Parking brake and cables installed.The entire wiring was gutted and replaced.Now all lights,signals and 4 way works. Gauges hooked up.
Continue reading