Features Research Archives

To Top

Parkette(?) Flat Fender Fiberglass Molds

• CATEGORIES: CJ-3A, CJ-3B, Features, Unusual • TAGS: , This site contains affiliate links for which I may be compensated.

UPDATE:   Steve and I believe these are the Parkette Molds.  They appear to have sold.

You don’t see these appear for sale often. The CJ-3B Molds are especially unusual.

“Old set of molds to build Willys fiberglass bodies
One floor pan mold in good shappe.
One High hood body mold, needs to be reworked, wooden supports rotted and broken
One high hood grille mold
One low hood grille mold
One high hood hood mold
One low hood hood mold
One tailgate mold
Couple other misc. molds”

[fb_button]
 
To Top

Check out this photo from Offroad Action

• CATEGORIES: Features, Website This site contains affiliate links for which I may be compensated.

I was checking out Wes’ Offroad Action site the other day and ran across this amazing photo.  There is no evidence to support the rumor that the driver was texting just before this occurred (in fact, texting was a few decades away yet).  But, I’ll make the claim anyway.  See kids, particularly my kids, don’t text and drive off road!

Click on the pic to see a larger version and to see other pics of this CJ-5 Camper Combo.

[fb_button]
 
To Top

Builds: Mark updates us on his Jeepster Project

• CATEGORIES: Builds, Features This site contains affiliate links for which I may be compensated.

During Mark’s last update, he got a steal on some Mitsubishi seats that fit perfectly into “Her Royal Highness”.  He’s made some additional progress since then.

Mark writes, “You may recall phase I consisted of making her safe, legal and roll down the road without leaking out all the  fluids. Phase II for me was to make it reliable and comfortable. Phase III is body & appearance and that one may take awhile. I’m rather fond of the aged patina look (alright I’m lazy).

After sitting in a barn for 18 years I’ve been leary of opening up the 265 on the highway because I was afraid the gaskets would fail so I replaced both diff. gaskets, the t-18 cover gasket and the oil pan gasket on the SBC. Once I got in there I was amazed at the pristine condition of the gears, they looked new. I installed a sound system and finished off with some sweet tan leather seats.  Replacing the orginal split bench with modern buckets changes the whole driving experience for the better.

One neat idea was to mount the seats with 1lb. rubber mallets cut and drilled to compensate for the uneven floor board. I’ve included some pictures.”

[fb_button]
 
To Top

1944 MB With Custom Body

• CATEGORIES: Features, Sedan-jeep, Unusual • TAGS: This site contains affiliate links for which I may be compensated.

I stumbled upon this unusual Willys creature at this prewarcar website.  I guess Wally Cohn wasn’t the only person trying to create a unique body on top of the Willys platform.

“2 of these willys mb were bodied in germany in 1945. one was destroyed, ended in hamburg probably beeing rebodied to an original jeep, so when i got that survivor i did not do the same mistake and put it on the road again. now it is one of a kind with all the original chassis, drivetrain, axles etc. even with the original data plate date of delivery nov.11, 1944 (author Bussinger Kfz)”

[fb_button]
 
To Top

Tubing in a Tubeless World

• CATEGORIES: Biscuit, Features, Tires and Rims This site contains affiliate links for which I may be compensated.

I admit that sometimes I’m entirely clueless.  Today was a perfect example, for today I got my Desert Dogs mounted onto a 2nd set of Hurricane Rims that have been holding down the garage floor for more than two years.

The last time I got a set of offroad tires mounted on a set of rims was 27 years ago.  Those too were desert dogs. I had inner tubes added to the tires so that the air pressure could be dropped to 10 – 15 lbs when jeeping; using inner tubes was a very normal thing to do.

So, now you will understand that when I pulled up to Les Schwab Tires (btw, Les Schwab, the company founder, was an early fan and seller of the Desert Dogs) and told the guy at the counter what I wanted to do, I didn’t think much of it.  He walks out, looks at the rims, looks at the tires, and tells me he doesn’t think the tires will actually fit the rims.  Frankly, he was looking at me like I just dropped in from planet Mars.  Fortunately, I’m used to people looking at me like that.  I told him that Les himself would have mounted Dogs to rims similar to what I had.  He took it all in and seemed to think that maybe my request was possible.  So, I asked him for an estimate to mount the tires and add inner tubes.

He gave me an estimate ($91 to mount and balance them) and said he didn’t know if he could get some inner tubes, because running inner tubes on tires like that would cause them to heat up and explode (the inner tube explode that is).   Now it was my turn to look at him like he was from Mars.

However, to his credit, he was courteous the entire time and spent extra time attempting to locate inner tubes, finally finding four tubes at a cost of $38 …. that’s $38 a piece.  After some quick addition I concluded that would cost me almost $160 just for tubes!!  I told him thanks, I would see what else I could find for inner tubes.

So, I left, went home, and hopped on my beloved internet, hoping I could find a better price.  After a half our of searching the internet and finding nothing, I had an idea.  I would call Bucks, a local 4×4 shop, to see what they used.  They said they rarely use inner tubes.  The last time they used them, they got the tubes from Commercial Tire.

It turns out, in a world of tubeless tires, the use of tubes, once standard practice, has evaporated.  Worse, no one told me!

My next step was to call Commercial Tire and see what they could do.  The guy on the phone was helpful and said tubes would probably cost about $23 for my tire size, however I’d need to check the stem size of the rim as the tube price he was quoting was for a tube with a thick stem.

I figured I had nothing to lose, so I drove over to Commercial Tire and asked for some tubes.  They looked at my stem size and determined I needed a rare inner tube.  Several employees started making calls and one finally found four tubes at a warehouse somewhere and that was all they could find.  The price would be $35 a piece.

I still thought that was crazily high, so asked them to just give me a quote on mounting the tires.  They said they wouldn’t mount them because they were older than 6 years. So, my trip to Commercial Tire was a waste of time; and it confirmed that the world of tires had changed while I had been away from jeeps.

I left Commercial Tire and made the decision that I would mount the tires without tubes and give that a try.  Since Les Schwab was willing to mount the tires, I decided to just take the tires back to them and get them mounted.  Then, I took the mounted tires home and put them on the jeep.

So, maybe putting 18 year old shoes on Biscuit isn’t the smartest decision, but I couldn’t resist.  They probably have 5000 miles of road wear left, maybe a little more. However, I had to do this to complete my image of what Biscuit would be: a fiberglass flattie with an old school look.

Here are a couple images of the new, old tires.  I do prefer the pure aluminum color of the other rims, rather than having the black within the splines. So, I plan to polish the rims at some future point and take off that black.

[fb_button]
 
To Top

Oldies but Goodies – Desert Dog Tires

• CATEGORIES: Biscuit, Features • TAGS: This site contains affiliate links for which I may be compensated.

The main reason for my trip to Seattle this weekend was to pick up a set of Forumla Desert Dog tires from Mitch with some good tread still left that I can use as offroad tires.  I have four more hurricane rims just aching for these tires, so I can’t wait to get them mounted.  This should really make Biscuit ready for summertime explorations.  Thanks Mitch!

[fb_button]
 
To Top

Willys Shouldn’t Live in Cages — Victoria, BC circa 1990

• CATEGORIES: Features This site contains affiliate links for which I may be compensated.

I think this image was snapped just over 2 decades ago outside of Victoria, BC.  That’s me in the picture, shocked at the life that poor jeep must endure.  I wanted to demonstrate the unethical treatment of this Willys.  Just look how tight the cage is!  With no place to move, to roam, to really stretch out, this poor Jeep was forced to live a semi-sheltered life outdoors, a prisoner to the whims of the weather.  And, Canadians are usually so nice!

[fb_button]
 
To Top

Builds: Hugo’s CJ-3A in Uruguay

• CATEGORIES: Builds, Features, International This site contains affiliate links for which I may be compensated.

UPDATE: You can see the final build here.

A citizen of Uruguay, Hugo recently contacted me to appropriately correct me from confusing a town, Londrinha,  that doesn’t exist in Puerto Rico with one that does exist in Brazil (In this case, I believe I can blame Google Maps for my error!).

Because of this error, I got to know a little more about Uruguay, which it turns out I didn’t really know that much about.  One cool thing I learned is a hand was installed on (or more accurately into) the Punta del Este Beach in 1982 by Chilean artist Mario Irarrazabal.  He titled it the Monumento al Ahogado (Monument to the Drowned).  Apparently, he did another, different hand in a Chilean desert.

Hugo reports that the jeeping is excellent in Uruguay, though he hasn’t had much of a chance to jeep this summer (it is summer there of course right now), because his CJ-3A is currently dismantled in his garage for repair.  However, he did forward this picture.  Thanks for sharing!

[fb_button]
 
To Top

Builds: Goose Fixes up His CJ-3B in only 4 Months

• CATEGORIES: Builds, Features This site contains affiliate links for which I may be compensated.

Goose wrote me an email today, announcing he had finished the restoration of his CJ-3B.  Not only did he complete his budget-conscious restoration in only 4 months, but he also documented it in two different locations (see links below); not a trivial task!   He’s done a good amount of work in a short time and I think he’ll be happy with it for quite a while.  Well done Goose!

Goose writes, “Hey Dave. I finally got my jeep finished and wanted to share the story. I’ll include a couple pics with this email but feel free to pull any others down from the links below too. The first link is from thisoldjeep, which I discovered here and the second is from a site where I frequent due to my dirtbike passion.

http://thisoldjeep.21.forumer.com/viewtopic.php?t=578&highlight

http://www.thumpertalk.com/forum/showthread.php?t=949807

Here are a couple before images:

Here’s a midway point photo:

And a couple completed photos:

[fb_button]