To Top

1948 CJ-2A Livonia, MI $16,000

• CATEGORIES: CJ-2A • TAGS: This site contains affiliate links for which I may be compensated.

UPDATE: Still Available.

(08/10/2020) Nice jeep with a replacement body and a few safety features.

https://www.facebook.com/marketplace/item/509675806521080/

“I have been over this Jeep and fixed or replaced everything that was wrong with it. I rebuilt the motor starting with a brand new block and everything bolted to it is either new or restored. It was going to live at our family cabin and be used for fishing and canoeing but then Jeep came out with the Gladiator and I just don’t need two Jeeps.”

1948-cj2a-livonia-mi0 1948-cj2a-livonia-mi1 1948-cj2a-livonia-mi2 1948-cj2a-livonia-mi3 1948-cj2a-livonia-mi4

[fb_button]
 
To Top

1944 MB Williamsburg, OH **SOLD**

• CATEGORIES: Features, MB • TAGS: , This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was $23,000.

This MB was restored by the seller’s father who served in Japan. If you live near Williamsburg or are/were an MVPA member, you may have seen it in local parades.

1944-mb-williamsburg-oh0 1944-mb-williamsburg-oh1 1944-mb-williamsburg-oh2 1944-mb-williamsburg-oh3 1944-mb-williamsburg-oh4

“1944 restored Willy’s Army Jeep. My late WWII Veteran Father purchased this restored Jeep in 2000 from a Gentleman in Louisville KY. My Dad drove one like it in Japan during the War. He used this one for local parades.
He had a stroke in 2008, and I became his driver for the events. He just passed this April at 94. It needs to go to someone who can appreciate it and use it like my Father did. Selling to help settle his Estate.

New Tires put on 10/2017 Coker 6.00-16 Military Tires
All oils changed two years ago. We only did about two Parades a year, dependent on the weather. Last parade we did was in 2019.

Everything works at it should. Very low maintenance vehicle.

Was stored in my climate controlled drive-in basement.”

[fb_button]
 
To Top

Willys Dump Bed Parts Covington, GA $1050

• CATEGORIES: Parts • TAGS: This site contains affiliate links for which I may be compensated.

Given the dual pistons, this might be a Garwood model, but I couldn’t say for sure. Unclear what the value is or what it would take to restore it.

https://atlanta.craigslist.org/eat/pts/d/mansfield-willys-dump-bed-unit/7165964402.html

Original dump unit from a 1960 Willys Jeep. Complete unit with tank and pump. Could be used to turn virtually anything into a dump bed.

willys-dump-bed1 willys-dump-bed2

[fb_button]
 
To Top

CJ-2A Parts Fredericksburg, VA

• CATEGORIES: Parts This site contains affiliate links for which I may be compensated.

No pics provided.

https://fredericksburg.craigslist.org/pts/d/spotsylvania-willys-cj2a-parts/7158504902.html

“parting out a 48 2a.
including: T-90,T-18, D25, D41, go devil parts, block etc.generators, frame.
also like new cj3a windshield with glass.
fiber glass body tub in very good condition.
many other small parts.
will sell all or part.”

[fb_button]
 
To Top

Kemco Flat Fender Hardtop Old Forge, PA $700

• CATEGORIES: Parts • TAGS: This site contains affiliate links for which I may be compensated.

Price is negotiable (need restoration). KEMCO was the transition brand name between Beck and Kelly hardtops.

https://scranton.craigslist.org/pts/d/old-forge-willys-jeep-steel-cab-and/7171080061.html

kemco-hardtop-oldforge-pa1 kemco-hardtop-oldforge-pa3

“KEMCO all steel cab and doors for flat fender willys jeeps. This top is made by The Kelly Mfg. Co. The top will need to be restored and is sold as is. May be able to deliver for an additional fee. Price is negotiable.”

[fb_button]
 
To Top

Former Electric Stainless Flattie Sausalito, CA eBay

• CATEGORIES: CJ-3A, Features, stainless/jewels • TAGS: This site contains affiliate links for which I may be compensated.

UPDATE: Still Available. This is only for the body and parts.

(01/20/2020) The body includes additional parts.

https://www.facebook.com/marketplace/item/539638033394907/

stainless-electric-vehicle9

Here’s what it looks like when was together.

stainless-electric-vehicle01 stainless-electric-vehicle0

This is how the chassis looks:

stainless-electric-vehicle1 stainless-electric-vehicle2

“Hi I have stainless steel CJ3A body for sale complete including windshield and Omni wipers installed with 12v wiring included. I believe I bought Del@OMC last CJ3A from him in Oregon a few years ago before he passed away (rip).

Del owned the factory in the Philippines where they were made and exported to U.S. Great construction his bodies will probably out-last you and I!:) I built it for a EV prototype for a classics EV startup but all future models will use aluminum body out of Canada BC (stretched ~ 1 foot for more legroom up front) so no longer need this body. It’s just been a demo vehicle max 50 miles on it it’s like new see pics (does has vinyl EV stickers on hood those should heat gun off I haven’t bothered yet don’t have the time))”

Continue reading

[fb_button]
 
To Top

1951 CJ-3A Charlotte, NC **SOLD**

• CATEGORIES: CJ-3A This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was $3500.

(08/01/2020) Mark shared this one. Runs, but body is rough.

“Rebuilt hurricane motor 4cylinder 1000 miles,new carb,3speed,manual transmission,clear title,this is a project Jeep that can be restored it needs a new tub&frame cleaned up but you got a good motor & transm,now Jeep is good to run around now it just needs tail lights-headlights work, it just depends what you want.i bought it from a family in Weaverville Nc they had it for years road it around the mountains.”

1951-cj3a-charlotte-nc0 1951-cj3a-charlotte-nc1 1951-cj3a-charlotte-nc2 1951-cj3a-charlotte-nc3 1951-cj3a-charlotte-nc4

[fb_button]
 
To Top

1950 CJ-3A Plus Other Stuff Castle Creek, NY $5500

• CATEGORIES: CJ-3A • TAGS: This site contains affiliate links for which I may be compensated.

UPDATE: Still Available.

(08/01/2020) The principal item is a CJ-3A, but there’s other items here, too.

https://binghamton.craigslist.org/for/d/castle-creek-willys-jeep-lot/7167552318.html

“CJ2 1950 Willy’s Jeep with the following:
. snow plow
. back seat
. original wind shield
. aluminum top
. 16″ bottom land plow with front weight
. complete spare parts jeep
. chassis frame with all running gear
. 10 kw generator powered by willy’s jeep engine

I am the second owner and have had it since 1976. The first owner was my neighbor so I know the complete history. In 1976 I had 90% of the body rebuilt along with an engine overhaul. I used it in the woods so got banged up a little , for years now only for plowing snow. In good mechanical shape burns no oil. Seems this would be a good lot for someone that would refurbish back to original condition or just use as is around your homestead.”

cj2a-plus-stuff01 cj2a-plus-stuff0 cj2a-plus-stuff1 cj2a-plus-stuff2

Continue reading

[fb_button]
 
To Top

1957 CJ-6 Pepperell, MA $1950

• CATEGORIES: CJ-6 This site contains affiliate links for which I may be compensated.

UPDATE: Still Available.

(05/31/2020) Setup for a snowplow, but no mention of one accompanying it.

https://boston.craigslist.org/gbs/pts/d/pepperell-1957-willys-cj-6/7171665639.html

“Running -driving -stopping Jeep -has Dauntless V6 great power -4 wheel drive works -frame has been repaired as well as body -seats maybe different .have old Maine registration $2200 serious buyers only thanks that’s the price if it goes this week -drive it up on trailer”

1957-cj6-pepperell-ma41 1957-cj6-pepperell-ma42 1957-cj6-pepperell-ma43 1957-cj6-pepperell-ma4

[fb_button]
 
To Top

1944 GPW Thomasville, NC $2500

• CATEGORIES: GPW (Ford MB) This site contains affiliate links for which I may be compensated.

UPDATE: Price dropped to $2500

(02/01/2019) Mike spotted this GPW.

https://charlotte.craigslist.org/cto/d/thomasville-1944-jeep-wrangler-ford-gpw/7173291344.html

1944-gpw-nc3 1944-gpw-nc2 1944-gpw-nc

“Here is a 1944 Ford GPW. Hopefully if you are reading this, you know what you are looking at. I bought this sight unseen from a farmer’s estate in Wyoming. It is literally a barn find and had to be removed from the upper part of the barn with a forklift. I had it shipped across the country to NC and it sat for a couple years. I own a private restoration shop and recently got around to looking at what turned out to be a Ford GPW. The vehicle was clearly used on the farm and has had extra holes drilled into the sides and almost looks like they were using it to haul rocks? There are more dents in the tub than rust. The farmer reinforced the front bumper and had brackets for farm implements. It has a tow hitch on the front as well.

The Ford was “hot rodded” out in the 1960s and a Studebaker OHV straight 6 was installed with a T90 transmission. The front axle has Dualmatic locking hubs. From some light research it seems like this engine was made in 1961 and appears to have the original fan belts. I have no idea of the condition of the engine and it is missing the intake. The Goodyear Power Cushion whitewall tires have date codes from the 1960s, which is when the Ford was stored in the barn. It has not been driven in over 50 years. Those 50+ year old tires have tubes in them and still hold air and have tread. The spare appears to be the original “US” marked.

Continue reading

[fb_button]