Rollcage Research Archives

To Top

1946 CJ-2A Roseville, CA $2200


It’s a project.

“PROJECT! It has a 283 sbc and bold 31’s but everything else is pretty original. Has rust. Ran and drove but had radiator and gas tank leak so has been sitting for months. May part out if the price is right. Clean and clear title with registration in my name on non-op with proof. $2200 trade for enduro/quad/dirt bike/dual sport”

1946-cj2a-roseville-ca8 1946-cj2a-roseville-ca9

To Top

1948 CJ-2A Project Vernon, NJ $4500


It’s a project with work remaining.

“For sale is an unfinished project I built, finished, than took it apart for major changes. It’s been sitting for a few years and I just don’t have the time to give it.

1948 Willys CJ2A
– 350cid, 4 bolt, Jasper engine assembly with less than 20,000 miles. TBI fuel injection. Never finished wiring. PCM and all sensors. MSD HEI distributor. $500
– shorty headers wrapped $150
– Ford T18 manual trans with Chevy bell and 11” clutch. Has super low first gear. $750
– Jeep Dana 300 with stock gears and twin stick $300
– Dana 30 3.07 front out of a CJ7. currently installed spring over. Have new 4.56 still in box. $150
– Dana 44 front out of early bronco with weld on radius arm brackets. Has gears no shafts. Don’t know the ratio. $150
– Scout Dana 44 rear. All new internals. 4.56 gears. Alloy shafts. Spool. Disk brake caliper brackets for Chevy calipers. $600
– spare frame $100
– chassis, body, cage, bumpers, seats $750
– bolt on grille hoop $100
– tool box $100
– 5 Auto meter gages $125
– jegs ignition switch panel $60
– RCI fuel cell with hole cut for TJ sending unit $125
– griffen aluminum radiator on custom mount with electric fan (Taurus) $300
– five 34×10.5 super swampers. 4 are practically new, probably 10 miles on them. White wagon wheels with weld on stiffeners. Staun internal bead locks in all 5. $1700.
– ruff stuff specialties dual triangulated 4 link kit. Partially assembled. Not finished.
– custom heavy duty driveshafts made by axle exchange. Cost over $1000 new. $600

– plated rear frame. Custom poly motor and trans mounts. Custom bent exhaust, wrapped about half way.

I’m probably forgetting some things.
This project needs the rear suspension, fuel system and exhaust sorted out to be completed. There will be some odds and ends of course, but those are the major hiccups. It’s been garaged for about five years. I want the space back. Will deliver entire project within in 100 miles of 07422 if you come and check it all out first for $4500. ‘

1948-cj2a-nj-6 1948-cj2a-nj-7 1948-cj2a-nj-8 1948-cj2a-nj-9

To Top

1947 CJ-2A Lake Elsinore, CA $3500


UPDATE: Price dropped to $3500. Needs a new tranny.

(11/07/2016) Looks nice.

“1947 Willys jeep for sale
Very clean, nice cage.
Has a chevy 327 out of a 68 camaro that runs great
brand new prp off road seats and harnesses
New tires.
Really just a great vehicle.
All it needs is a tranny. ($500)
My loss your gain at this price.
No lowballers.”


1947-cj2a-lakeelsinore96 1947-cj2a-lakeelsinore97 1947-cj2a-lakeelsinore98

To Top

Stainless Steel Flattie Atascadero, CA $8000(?)

• CATEGORIES: Racing, stainless/jewels • TAGS: , , , .

UPDATE: Price listed at $8 (which I think means $8,000).

I imagine this goes fast on the dunes.

“It a flat fender full stanless steel willys from the Philippines. . It has a 383 twin turbo afr aluminum head sbc. In it with a 400 trans with a brake in it it has a supper 14 rear end with leaf springs and 44 up front on coil over it a cj Fram that is box call for.more info thanks”

stainless-steel-drag-jeep2 stainless-steel-drag-jeep3 stainless-steel-drag-jeep4

To Top

1946 CJ-2A Spring, TX $10,500


UPDATE: Price dropped to $10,500.

(01/23/2017) Looks nice.

“1946 Jeep CJ2A Willys – Major updates and items done recently to Jeep. Body is rust free and straight. I have invested a lot of money into this Jeep. Runs and drives well. Items replaced are listed as follows :
Rebuilt V6 Engine with 14 miles on it, 4×4, 3 speed, Headers, New Aluminum Radiator, New 4 Barrel Carburetor, Tires almost new with new spare, Complete soft top, New Water Pump, New Air Filter housing kit, New Thermostat & Housing , New Alternator , New Electric Air Horn , New Electric Fan Assembly,
New Distributor Spark plugs and Cap, All New Wiring Harness, All New Instrument Cluster, New Aluminum ” Quick Disconnect “Steering Column, steering linkage, and quick disconnect Steering Wheel, New Head Light Switch, New Turn Signal Switch with new indicators, New Aluminum 11 gallon Fuel Tank, New accelerator cable and gas pedal, New tail lights, New Starter , Checked and filled all cases fluids, New Battery, New Upper / Lower Radiator Hose, New Coolant Reservoir, New Cooling Fan Temperature Control….This Jeep is ready to roll. I was going to add new exhaust to it, and re-upholster the seats but Dave Ramsey says I need to sell my toys. Please interested buyers only ! Have all the invoices on items just replaced. This Jeep is a classic. Hate to see it go.”



To Top

1946 CJ-2A Sumner, WA $14,500


UPDATE: Still Available.

(10/27/2016) Lots of upgrades, include on board welder and air. Looks built for jeeping. Has the full glass windshield, too.

“1946 Willy’s Jeep with too much to list but I will try, 3.8 ford V-6 aluminum heads (extra motor), auto Transmission, extra transfer case complete. upgraded everything, extra wide custom front window flat class, upgraded axes, on board air compressor, holding tank, winch, off road lights, family roll cage, new top for jeep still in box, (old top- if out and wheeling);
new this winter- all four disc brakes all the way around, power steering, two speed wipers, two speed heater, viper security alarm with perimeter alarm, Bose speakers, pioneer stereo, back seat/ with seat belts with build in locking tool box with a quick disconnect, it is water proof for groceries if needed or beer, deer rack for hauling out, or hauling gear,
tow hitch, all new gauges, complete fuel system flushed tank pulled with new sending unit and all is undercoated, locking gas tank, spare fuel tank, with switchable tank switch, half doors and bikini top, two hard tops for the jeep, interior lights, tilt wheel, spare tire, lock in hubs, reclining seats, nice mirrors— extra brain mounted just in case, on board welder, welder lead, air hose, wench remote cord….. storage boxes in rear and deep glove box, must see… nice jeep”

1946-cj2a-sumner-wa91 1946-cj2a-sumner-wa92 1946-cj2a-sumner-wa93 1946-cj2a-sumner-wa94

To Top

1946 Sand Jeep & Trailer Tacoma, WA $50,000

• CATEGORIES: CJ-2A, Racing • TAGS: , , , , .

Quite the build!

“1946 Willys CJ2A shell, full drag chassis, Wally World (Rick Wallace) paint. 567 C.I. Dart Big M 800HP/pump gas, Gary Williams 1150 Dominator, Super Victor Jr. intake, Dart Pro 1 heads, Ron Davis radiator, Eagle rotating assembly (on and on and on), have complete professional build sheets. PowerGlide w/4500 stall (2k HP build), scatter shield and drive line loop. Modified Dana 60 (4 link) w/removable drag bar, spool w/6.17 gears (have extra open gear set), 35 spline Mosers. Areospace brakes w/second hand brake between seats when running the open gear set for separate tire braking/steering. QA1 shocks w/adjustable height linkage.

Radio headsets-person to person, car to car capable, music. Listed the major info. but so many details, specs and pictures, feel free to inquire about any other details. 60k in the Jeep build alone . Have a complete ledger of the build. I will sell the Jeep separate from the trailer, but not the trailer alone. Sport Trailer brand 20ft wide body, oversize 48″ walk-in door, 5k axles, 80gal on board water w/pump, 100 gal fuel station, 110 interior/exterior outlets, florescent lighting, outdoor floods side and rear, 17′ awning, 30amp w/inverter, dual interior batteries, 5k interior winch (front and rear controls), in floor and wall tie down points. Electric tongue jack.Again, on an on. This was nearly an 80k package when it was built, who knows to have them built and packaged together now. This was one of the last Jeep builds to come out of a So. Cal. shop still fabricating today.”

1946-cj2a-sandjeep-tacoma-wa02 1946-cj2a-sandjeep-tacoma-wa01 1946-cj2a-sandjeep-tacoma-wa0 1946-cj2a-sandjeep-tacoma-wa1

Continue reading

To Top

1953 CJ-3B Selah, WA $18,000

• CATEGORIES: CJ-3B • TAGS: , , , .

UPDATE: Still Available.

(11/11/2016) Has a few updates and some nice pin striping.

“Complete rebuild from the ground up. Chevy 350 engine. Apple wood dash, Mint condition. Must See!! ”

1953-cj3b-yakima-wa-96 1953-cj3b-yakima-wa-99 1953-cj3b-yakima-wa-98 1953-cj3b-yakima-wa-97

To Top

1951 CJ-3A Talmadge, CA $28,000


Another unusual build.

1951-cj3a-talmadge-ca1 1951-cj3a-talmadge-ca2 1951-cj3a-talmadge-ca3 1951-cj3a-talmadge-ca4

“1951 Willy’s Jeep 4X4 CJ3A. $28,000 OBO Fresh resto, you won’t find one nicer at any price, 3400 miles since complete, I drove it from Portland To San Diego, runs like and champ and the best driving jeep you’ve ever driven, no freeway sway, built to be used, reliable and sexy. New crate 350 engine from JEGS with a 454 Lunati lift cam, all MSD ignition and wires, new 2 core 1” aluminum radiator, Kevlar wrapped custom headers, oil cooler, transmission cooler, everything under the hood and entire vehicle is new. Dana 44 limited slip in the rear with new Auburn limited slip spline and hubs (big upgrade over the originals). Dana 27 Limited slip upfront, both axles have new seals and brakes, front disc with power booster, power steering, hydraulic clutch, flaming river adjustable steering column, new 3 speed transmission, T-18 Borg Warner transfer case with over/under drive, Lakewood Bell housing, Center force Clutch assembly, Mean Green gear reduction starter. Smog exempt and current registration paid.
Continue reading

To Top

1948? M-38? San Luis, AZ $480


UPDATE: Price dropped to $480. Joe noted the body looks to me an M-38.

(08/10/2016)  “For sale i have a Jeep willys flat fender cj2a, i believed its a 1948. It has the stock, diferentials and transfer case, dana18. No tittle for it. What you see is what you get. Call me for more info. ”

1948-cj2a-sanluis-az1 1948-cj2a-sanluis-az2 1948-cj2a-sanluis-az3

To Top

Year? CJ-3B Miami, FL $500


UPDATE: Price dropped to $500. No drive train.

(07/20/2016) Appears worth a look. Has some funky aspects.

“Willys Jeep set up for 350 Chevy 2 wheel drive no motor no tranny”

year-flattie-miami2 year-flattie-miami3

To Top

1948 CJ-2A Colorado Springs, CO eBay

• CATEGORIES: CJ-2A • TAGS: , , , .

Nice build.

“48 Willys CJ-3A custom, Kenny Bell Buick V-6, Turbo 350. Late model CJ frame and running gear used for the build. Lots of custom parts inside and out. Possible trade RZR/ Maverick”

View all the information on eBay





Continue reading

To Top

Early CJ-5 Rollcage Milwaukee, WI $400


Interesting design.

“Full roll cage to fit a CJ-5 tub years 55-71.
2″ tube 1/8″ thick. Very well built, came on jeep when I purchased and not what I’m looking for.”


To Top

1949 CJ-2A Santa Rosa, CA $19,000


UPDATE:  Still Available.

(07/29/09) “Year: 1949, Model: Willy CJ2A, Miles: Under 2000, Lic. #: 49WILYZ, Motor: 383 Stroker, Transmission: 350 Auto, Rear end: Ford 9”, Other: Fuel cell, nitrous, dual exhaust, Invest (by previous owner and myself): Over $40,000,”



To Top

1951 M-38 Signal Hill, CA $4900


UPDATE: Still Available.

(12/19/2014) Has the front of the rollcage installed on the steps.

“1951 Jeep m38 283 small block chevy. Runs good, with only about 500 miles on engine. Rebuilt transfer case, bigger brakes all new, dual exaust, bigger dana rear end, heavy duty rear bumper. No texts. Call number for questions.”

1951-m38-signalhill-ca1 1951-m38-signalhill-ca2 1951-m38-signalhill-ca3 1951-m38-signalhill-ca4

To Top

1946 CJ-2A Beeville, TX $4000


UPDATE: Still Available.

(03/22/2016) That’s some cage!

“1946 Wyllis with roll cage. Needs master cylinder work and rebuild carb. 31 inch rims included. Has custom bumpers and tows from front.”

1946-cj2a-beeville-tx1 1946-cj2a-beeville-tx2 1946-cj2a-beeville-tx3 1946-cj2a-beeville-tx4

To Top

1958 Stretched CJ-3B Lake Worth, FL eBay


Lots of modifications on this unusually stretched CJ-3B.

“This machine is 100% Solid Steel. No bondo, no fiberglass. Built in Colorado by professional machine shop at a cost of $14k. Receipts can be provided. V8 350 Good Wrench motor with less than 1000 miles on it. 4wd, 2 seater and Dual exhaust. This thing can rumble. Brand new tires, transmission, power breaks, and headers. This ride is great but I need the money for the holidays. Received offers to sell locally. There is no reserve on this listing so it will sell. I was burned the last time I listed this so No paypal.”

View all the information on eBay


To Top

1947 CJ-2A Inland Empire, CA $7000


Looks nice.

“cylinders: 8 cylinders
drive: 4wd
fuel: gas
title status: clean
transmission: manual
Selling my 1947 jeep willys
Has a 327 out of a 68 camaro , full cage ,prp seats and harnesses, runs strong , current registration. Open for trades”

1947-cj2a-inlandempire-cali4 1947-cj2a-inlandempire-cali3 1947-cj2a-inlandempire-cali2 1947-cj2a-inlandempire-cali1

To Top

1951 Extended Wagon Temecula, CA $26,500

• CATEGORIES: Willys Wagons • TAGS: , .

UPDATE: Price dropped to $26,500

“One of a Kind – 1951 Willys stretch Suburban Stationwagon
New Brakes and Steering
4 Doors – 6 Seats
350 Chevy with Edelbrock kit
425 HP
All New AC and Heating”

1951-wagon-4door-temecula-ca1 1951-wagon-4door-temecula-ca2 1951-wagon-4door-temecula-ca3

To Top

1947 CJ-2A Whitefish, MT $6500


UPDATE: Still Available.

(10/20/2016) Could be a good price. Interesting roll cage.

“305” Chevy bored to 315″ , T-350 auto, Dana-18 T/Case, Large Axle Dana-44 rear w/lock-rite locker 3:73 ratio, Dana-27 front, Chevy Power steering, tilt steering column, 5-ton winch $6500. Also comes with spare tire, rear seat& full carpeting”

1947-cj2a-whitefish-mt1 1947-cj2a-whitefish-mt2 1947-cj2a-whitefish-mt3 1947-cj2a-whitefish-mt4

To Top

1942 GPW Issaquah, WA $3000


Needs work. The dogs look in pretty good shape. Nice cage, too.

“All metal body with a fiberglass hood. Currently installed 302 V8 (with short 289 waterpump to fit radiator), 3-speed transmission, Dana 20 transfer case. In progress new wiring harness. Full roll-cage fit to the frame. Warn 5k winch.
I have the MB windshield and flip headlights that need restoration.
Needs clutch and brake linkage, drivelines, exhaust, and lube-oil all around.”





To Top

1950 CJ-3A Canon City, CO $7500


Listed as an M-38, it looks more like a CJ-3A.

“Jeep 1950 Willys M38 with F-Head “Hurricane” 134 Cu. In. Engine. Full Roll Cage With Rack, Fuel Cell. Good Tires and Service Manual. Runs Great!”

1950-cj3a-canoncity-co-91 1950-cj3a-canoncity-co-92 1950-cj3a-canoncity-co-93 1950-cj3a-canoncity-co-94

To Top

1947 CJ-2A Brighton, CO $2500


Needs some work. The battery now sits behind the front bumper.

“I have a very nice little Jeep.
Very rust free and clean.
Brakes and electrical need work
V6 Oldsmobile engine.
3500 or best offer”

1947-cj2a-brighton-co-091 1947-cj2a-brighton-co-092 1947-cj2a-brighton-co-093 1947-cj2a-brighton-co-09

To Top

1947 CJ-2A Leesburg, FL **SOLD**


UPDATE: **SOLD** Was $7500.

(02/18/2016) Looks nice.

“1947 Willys-Overland CJ2A
4.25 Lift (3 inch Black Diamond spring lift w/ 1.25 lift Confer shackles)
32×9.5×15 Swamper TSLs (almost nothing for wear)
6 point cage tied to the frame on the front hoop
53′ CJ3A 134ci L-head flathead 4 cylinder
T90 3 speed transmission (rebuilt with a Novak master rebuild kit)
Dana 18 transfer case (rebuilt with a Novak master rebuild kit)
full Painless wiring harness
all new brakes”

1947-cj2a-leesburg-fl0 1947-cj2a-leesburg-fl1 1947-cj2a-leesburg-fl2 1947-cj2a-leesburg-fl3 1947-cj2a-leesburg-fl4

To Top

1946 CJ-2A Hesperia, CA $47,500


UPDATE: Still Available.

(08/29/2016) Seller has spent lots of money on this build.

1946-cj2a-hesperia-ca-93 1946-cj2a-hesperia-ca-94 1946-cj2a-hesperia-ca-95

“1946 CJ 2 / Post WWII / Willys * New Crate 350 Chevy Motor with Comp Cam, 6,500 miles on motor, 9,600 on Jeep, Custom made powder coated Headers, Elderbrock intake Manifold and polished pulley’s, Aluminum Valve Covers, Aluminum Air Cleaner, Holly Street Avenger dual pump 4 Barrel Carburetor, Chrome fuel pressure gauge, Chrome Alternator and Billet brackets, Stainless Steel overflow, Fiberglass Flex Fan, Cowl Induction Hood, and many extras
* New 2 ½ inch Dual exhaust with electric header cut outs
* Completely rebuilt 4 speed manual Muncie transmission, Hurst Shifter, New Clutch, Pressure Plate, Pilot Bearing & Throw Out Bearing
* 4 wheel drive front and rear housings and axles, new 373 gears, new bearings and seals, in Overdrive at 80 mph it tach’s 2,300 rpms
* Tinted Windshield with wipers
* Black Paint, Silver & Tan pin striping  Continue reading