Vintage Carnival Ride Jeeps $300 Tupelo, MS
These are cool, would like to have one. Middle one looks the best from here.
Information from seller:
Antique carnival ride Jeeps, need restoration $300 EACH Tupelo Miss
Vintage Carnival Ride Jeeps $300 Tupelo, MS
These are cool, would like to have one. Middle one looks the best from here.
Information from seller:
Antique carnival ride Jeeps, need restoration $300 EACH Tupelo Miss
1952 Willys Aero Wing $900 North Chili, NY
Neat little car, NE car so typical issues plus says needs a frame so check for sure, but still I liked this one.
Information from seller:
52 Willy’s aero wirg motor turns over truck very. Good floor pans good doors very good needs rocker panels needs a frame u pick up
You don’t see mighty mite’s hotrodded very often.
https://www.facebook.com/marketplace/item/1565428310728552
“1960’s Mighty Mite Jeep
One Of A Kind.
Aluminum body, fiberglass hood & fenders from a Toyota Land Cruiser, 4X4 positraction front & rear, independent suspension with inboard brakes, power rack & pinion steering. 4 speed transmission with high & low range. Approximate LBS 1700 to 1800
Engine
Aluminum 215 block shaved & board out to 327 cubic inch. 300
crank. 300 heads. Needle bearing roller cam. Chaffer Aluminum fly wheel. Remote oil filter with oil cooler. Holly 850 4 barrel carburetor. Engine has not been tested has 0 miles on it.
Runs good & drives.
Built by Sam Sturges & Less Black.
Purchased in 1977 or 1978 from Jack’s 4 Wheel Drive on Stone Ave. No title can privde a bill of sale.
THIS JEEP IS STICKLEY FOR OFF ROAD USE ONLY, not a daily driver in its current state
Out of money and out time due to health issues. It’s ready for someone to take it to the next level and make it your own vision.
Sold as is, CASH ONLY NO TRADES “
Looks like a nice truck.
https://www.facebook.com/marketplace/item/3763425137248242
“1949 willys jeep pickup 350 motor with headers 10 bolt rear end Front axle original Mag wheels Paint is good no rust No power brakes, or steering No heater or air conditioning Bought this to take to car shows, it’s a head turner Please serious enquirer only don’t have time to take everyone for a joy ride Cash only”
This looks like a fun ride.
1955 Willys. Rare side windows and rear barn doors. S10 chassis, 350/4L60. PS,PB,CC, Heat & Air. Front bucket and bench rear seat. Re chromed bumpers. All new tinted glass. American Racing wheels on 215/60×16 and 235/70×16 tires. Gauge cluster and steering column out of ‘91 pickup.
UPDATE: Price dropped to $16,995.
(07/04/2024) This is a highly modified wagon on a Mustang chassis.
https://www.facebook.com/marketplace/item/437982825727379
“Barris customs,2 Hobe surf boards,291 Chrysler hemi, automatic, removable top, 4whl disc brakes, mustang ll sub- frame, AM/FM/CD, freshly tuned & carb o/hauled. Runs rides & drives awesome”
UPDATE: Still Available.
(06/02/2024) This looks like a well done build.
https://www.facebook.com/marketplace/item/1279260949403501
“4×4 ,Disk brakes, runs good, Flat Head 6”
UPDATE: Price dropped to $24,500.
(10/29/2023) Lots of interesting customizations on this Jeepster.
https://spokane.craigslist.org/cto/d/chattaroy-willys-jeepster-custom-street/7760746776.html
“Full Custom 1950 Willys Jeepster. It just doesn’t get more unique or custom than this. Powered by a great running Chevy 350 with throttle body fuel injection spinning a 5-speed manual tranny. Sits on a Mustang II type suspension with disc brakes up front and drums in rear. Has a custom built interior, console, and a dash off a ‘40 Ford fitted with 3rd generation Firebird gauges and tilt steering. The hardtop is removable making it a slick little roadster to enjoy. It also has shaved door handles and the custom built tonneau cover for all your goodies.
Painted in a vibrant metallic blue with a bit of tasteful pin striping throughout. Deep old school rumble coming out the cherry bombs on each side. $26,500 seems like a very good deal for you from me. Let’s see what you think. You could not build this car for anything near that. I have gone thru the car nose to toes to make it safe and realizable. I have thousands of dollars of receipts that will go with the car. For the person that wants a very good and distinctive clean driver classic.”

Has a less hotrod feel and more steam punk (not that I’m an expert on what is or isn’t steam punk).
https://phoenix.craigslist.org/cph/cto/d/concho-custom-built-1947-willys-tub/7761965598.html
“I have a custom 1947 Willys Tub Body rat rod for sale. Asking $6,000 OBO. Located in Concho, AZ. Would prefer cash, but open to trades; RV, travel trailer, enclosed trailer, tractor, skid steer, truck, work/cargo van, let me know what you have. The guy I got it from said it was custom built by a guy who worked as a machinist/welder at the Mines in Bagdad Arizona so he had full access to the metal shop there.
1947 Willys Tub Body
Custom Steel Frame and Tube Steel Body
Front and Rear Airbags with onboard air tank
Aircraft Aluminum Seats
Custom Front Axle with Chevy K5 Blazer Spindles
Drivetrain and all electrical parts from 1988 Ford F150
Ford 300ci Inline Six Cylinder
5 Speed Ford Manual Transmission
Ford Rear End
I have clean title in hand. Call or text if you are interested or have any questions”
This might make an interesting build. Andy shared this one.
https://www.facebook.com/marketplace/item/643107610824073
“A willys pickup converted to a roadster pickup with a jeepster split windshield on a 4×4 chassis, no running gear, cab & bed***have 4 fenders, hood grille, tailgate & all panels ,***NO TITLE* BOS ONLY *** blue frt clip is SOLD ** ANXIOUS SELLER”