UPDATE: Still Available.
(01/30/2017) Craig shard this franken-jeep.
“1946? Willis home made half cab with Kelly doors, bed from 1/4 ton trailer, we call it “frankenwilly” flathead engine has decent compression, converted to 12 volt, new alternator,carb,starter, new wheel cylinders and master cyl. Frame repaired and sags, very ratty, very neat lots of good parts no title. We used it on the farm til this summer ”
Hard to tell how much value is here.
“Willys jeep project motor turns but dos not run but most allcomplet 1000 obo”
This is awesome.
“1946 jeep running gear,48 ford cab,259 c.i. Studebaker engine.it starts and runs good,slow gears.4wheel drive,a real conversation piece.calls only.cash only.scamers please don’t waste my time.the rig is titled as a 46 jeep,it has license.”
UPDATE: **SOLD** Was $3500.
Has diesel engine and aluminum body.
“1953 Jeep with an aluminum body. Dash and grill are original. Clutch and transition are new. This jeep will climb a wall with its 4 cylinder turbo diesel. Needs some TLC but its a blast to drive. includes a winch and snowplow.
I am sorry I had many calls and I dropped my phone in the lake Tuesday. If you are still interested please call.”
Here’s an odd-bodied 2A.
“Has the 240 Buick motor, Runs great. 4×4 works great! Great for farm use or off roading! Call for info….”
Looks like the seller was making a flattie truck (similar to some of these) out of this one.
“CLEAN FRAME NEW TIRES TO BAR WHAT YOU SEE IS WHAT YOU GET CALL ME”
UPDATE: Still Available.
(08/02/2012) “1946 cj2a 1st year of the CJ, Will sell complet or just Body with 6 point cage 120 wall dom tubing & frame set up for sbc is now a 2 wheel drive street rod,, pro built streched & boxed frame new m38 wimdsheil chopped 2″ gauges & petals go with, new jeep tail gate. New custom bed is now 102″ wheelbase would make cool rock crawer or lifted 4X4 have title in hand $4600 Body only; $10,000 complete.”
Wade spotted this unusual combination of a CJ-2A and FC-150 bed. No description provided.
Here’s something special. It runs. You’d be the only one on the block with this rig.
“Most all work has din done and alot of new parts was in the process of restoring but I’m burnt out 4wheel drive all works run’s and drives all wiring is new motor was rebuild a few years ago clean title serious people onely may consider art trade call”
The black CJ-2A might run (top pic). You’ll need a big trailer.
“Lots of good parts!!! Must all go together.. ”
UPDATE: Still Available
(03/17/2015) David spotted this unique, cool GPW Ford truck jeep. It even has a tilt bed.
“42 Ford tilt bed truck – 302 Mustang power – C4 automatic – 9″ rear end. Disc brakes on front, mag wheels, 2 fuel tanks, cloth interior. Currently on a Historical Vehicle license. Great driver. Formerly a magazine car, with copies to go with it.”
UPDATE: **SOLD** Was $1800
(04/22/2014) Here’s an odd duck. Note the seller will thrown in the weight for only $100.
“For sale is a 1950 Jeep Willys truck with a snow plow and clear title. Registration was active until this spring and it has been used yearly for snow plowing. It runs and drives well, has a 72 horse power F motor with has a 3 speed with high/low 4 wheel drive. This Jeep started out as a farm implement and at some point in time it had the frame and body modified to accept the truck bed. The interior sports VW bucket seats. It will need brake work(currently very little brakes), exhaust, tires(have tread but very weather checked), has a bad spot on the ring gear, the windschield is cracked and it has rust. There are many directions that you could go with it from continueing to use it as a unique plow truck to making a 1 of a kind rat rod. It is being sold as is, needing repairs or for parts.”
This has some style.
“For sale, 1948 Willys CJA 4cyl, 4 WD, Runs and Drives, winch Can email pics if interested, 2450.00 Paul 586-419-8546”
UPDATE: price dropped to $2800.
(06/05/2013) I’ve never seen another jeep truck quite like it!
“Vehicle has been customized, lengthend and widened by adding Jeep Pick-up running gear and fenders.
has original 4 cylinder engine, and running gear. It is in good running condition. Owners manual included. More photos available. Inquire at 251-3070.”
Does not run at the moment.
“Jeep Willy’s rat rod, Custom fabricated Jeep willys and Toyota/Nissan truck bed together with chevy 350 engine, 4bl carb, auto trans and 8 lug truck axles. 2wd. I purchased off ebay several years ago and had shipped to GA and it ran and lot drove then. (NOT STREET LEGAL, no turn signals/brake lights). frame is orginal jeep with extensions welded on to create longer wheelbase. It appears to be chevy suspension.
It has sat for over 3 years in my shop, so it will need to be towed and gas tank probably flushed out. I do not have to sell and will not accept any offers, just trying to help finance my home remodel/addition if possible if not I will keep this Jeep in the shop until I have time to finish.”
It’s funky, but appears in good shape.
“Running gear is from a vintage CJ2A. Body custom built. Equipped with stock 4 cyl engine, 3 spd trans, hi-lo range and 4 wheel drive. Mechanically strong, good tires. Good title and vintage plates. A lot of fun to drive and to look at. Good business mascot, parade vehicle or use on you acreage, at the cabin or lake.
Buzz found this crazy looking CJ-2A.
“1946 Willys jeep with an old school repower. Has a 1950’s flathead ford engine, this jeep ran three years ago but needed a pull to get started. One head was removed to inspect the cylinders. It looks like this motor may have the original bore but is ready for a rebuild. The distributer was removed and is missing. I will throw one in if I can find one in the shed. The body behind the firewall is made of plywood and fiberglass, it was nicely made but alot of the wood should be replaced if you choose to keep it as is. Original jeep dash and front sheet metal is in good condition. The frame is mostly solid but does have some issues at the front of the rear leaf springs and it has been notched for the steering gear to clear the engine. The engine is coupled to the jeep transmission with a rare adapter. Will be sold with a clear 1956 Willys title. The buyer will have 30 days to pick it up, if you send a trailer I can help load.”
View all the information on eBay
A little different.
“This was a frame up build project my son and I did 5 yrs ago. The frame was repaired and strengthen like the military version. Engine, tranny, transfer case, and axles all rebuilt. New leaf springs and shocks. All original running gear. Body made from 11gauge steel. Underbody Herculined protected. 12 Volt system. Electronic ignition system. Starts right up and is a fun drive. go anywhere!! this thing is great for the back words or hunting the deep woods or just plowing the driveway. Comes with an old jeep plow and tire chains. tires are in fair shape . a one of a kind. Call Bob at 603-547-2416”
UPDATE: **SOLD** Was $995
Bob’s jeep had about this much jeep left. Some used leftover parts and created something neat. I think that has some potential.
“1946 Jeep, Willy’s Overland, CJ2A. Serial No. 68995. Starts and runs good. Need Bonded Title. The brakes need wheel cylinders replaced. Original L-head Engine. Had a rod bearing replaced-runs smooth. New 6-volt battery. Good fuel tank. Transmission and transfer case shifts smoothly. 4 tires – just okay. The bench seat, is the back seat out of a suburban. Great for Ranch or just fun running around. This Jeep is BEAUTIFUL, but only in the eyes of the beholder!”
UPDATE: Still Available.
(06/02/2013) This might be worth a look.
“First off this is a project. It is not in drivable condition.
Not 100% sure I want to sell but I have to many projects and not enough time.
1947 Willys CJ2A truck project. CLEAR Title in my name.
This is sitting on a 1960 CJ5 frame that has been stretched 2 feet in the middle. ( I bought it that way )
Motor is a ’60’s “F” head 4 cylinder. I had it running 2 years ago. ( have video’s)
Trans is a 3 speed (T-90) Transfer case is a dana 18. has a front driveshaft, NO rear driveshaft.
Axles are stock 1947 axles dana 41 rear and 25 front.
Has an old skyjacker lift springs on it ( maybe 3 inch lift) ( front spring not on it but go with it.) longer shackles.
Tub is the matching one to the title that was cut in back to form a truck cab.
sheet metal work was started but in no way is it perfect.
The seller’s reaching on this price given the description.
“This is a 1949 cj3A Willys Jeep it has the original 4 cylinder Flathead Willys engine also have the original title it has been in a born for about 10 years it has not been run we have not touched it the body is in not too bad of shape for as old as it is will take 4500 or best offer you don’t find these everyday please contact me soon as possible it won’t last long”
Besides missing the rear of the jeep, it doesn’t have ww2 axles. So, I would suggest looking this over carefully.
“1944 GPW military flat fender Jeep – 5 new all directional tires (military stock) – runs perfect – 12 volt conversion – clean title and current registration –
contact casey 408-690-9183
PS: This is cash and carry ONLY – don’t bother me with the BS stories of being away, or being on an off-shore rig, or having your “agent” be in touch – I will not reply and simply forward your email to the scam and phishing folks at craigslist and local law enforcement.”
UPDATE: **SOLD** Was $3000
“Got a good running willies over all in good condition frame and floors are good has original seats in good condition windshield has a small crack the motor is really clean and will fire right up and run good needs some tlc some minor tinkering hear and there to be ready for the road this summer the back has been converted to a dump bed but was done profesinally and is done right good litle project would like 3000”
UPDATE: **SOLD** Was $250
(03/10/2012) This is an oddball. I dont’ see that rim design too often.
“Selling an early 1945 Willys CJ2A Jeep. Frame in good condition. Originally a manual coulmn shift. Rear section of body was modified with a 1930s Ford pickup bed and tailgate. No engine, gearbox, or transfer case. Good for project, or parts.”