UPDATE: **SOLD** Was $9500.
Lots of updates to this jeep.
“1948 willys jeep. 302 Ford auto tranny, 4 wheel disc breaks ,power steering. Call for more details”
UPDATE: **SOLD** Was $9500.
Lots of updates to this jeep.
“1948 willys jeep. 302 Ford auto tranny, 4 wheel disc breaks ,power steering. Call for more details”
UPDATE: Price dropped to $9400.
(12/16/2021) Has some updates.
https://seattle.craigslist.org/tac/cto/d/bellingham-1946-willys-jeep-cj2a/7451318215.html
“Rare Normandy Blue 1946 Willys Jeep CJ2A with diamond-tread aluminum accents – complete frame-up restoration 17K miles ago.
Features:
• Original L134 Flathead 4 cylinder.
• Steel Roll bar.
• Desert-style racing seats.
• Corbeau rear seat.
• Custom
• Warn hubs
• Rancho shocks
• 2″ hitch mount + tow/trailer wiring harness
• Wildcat EXT knobbies + spare.
• New carb at 8K.
• Custom lockable ‘trunk’ (removable) in diamond-tread.
• Full TigerTop soft-top (black).
Converted to 12-volt system + key start. Kickin’ stereo + Bluetooth. Comes with original glovebox door & other misc. Jeep parts-and-spares. Clear title.
Runs wonderfully – daily driver in the summer.
Warning: causes men over a certain age to get misty-eyed and talk about their granddad. This Jeep taught my boys many lessons; time for it to find new students.”
This has a variety of updates.
https://chico.craigslist.org/cto/d/chico-1951-willys-jeep/7450389984.html
“1951 Willy’s Jeep with brand new Philippine body. Original Go Devil 80 hp 4cyl motor. Original 3 speed manual. Original Dana 44 rear axle and Dana 30 front axle. GM power steering . Disc brakes. Fuel cell. New leaf springs. New tires. 6500 lb winch. New shocks and stabilizer. New aftermarket gauges. Set up for tow bar. Serious inquiries only”
Lots of updates to this CJ-2A.
https://phoenix.craigslist.org/evl/cto/d/gold-canyon-46-willys-cj2a-jeep/7445342643.html
“46 Willys CJ2A. HP Buick v6 (less than 500 miles) w/ TH350 Auto & model 18 transfer case. PS, PB, rear Dana 44 w/locker 5.38:1 gears & 11 in drum brakes, Front Dana27 w/ HD spicer shafts, locking hubs and disc brakes. Full cage. Steel diamond plate welded tub w/ powder coat paint. Many spare parts included. Great trail jeep.”
This could have a Bobcat shell body.
https://www.facebook.com/marketplace/item/223529036307712
“SD 7AL-2 with two step full wiring/gauges/switch panel. Dana 60 rear end/, 6:17 gears/with spool. 2WD. Full float leaf spring suspension with ladder bars. Reverse shackle with straight axle front end. TIRES/WHEELS/WHEELIE BARS NOT INCLUDED ($3k price drop). 12 point cage, five point harnesses, suspension race seats mounted on cage, Seat covers in excellent condition. Halon full suppression (extinguisher) system. No motor. Set up for SBC on alcohol or gas, plus power glide or TH 400. WILLING TO PART… OBO”
UPDATE: Price dropped to $10,500.
This custom build may have an aftermarket body.
https://www.facebook.com/marketplace/item/402995584824297
“This 1946 willys cj2a jeep is in very good condition. The jeep runs is a real eye catcher. I bought it in great shape & added a lot more of new parts to it.”
UPDATE: Still Available.
(10/18/2021) Looks in good shape.
https://www.facebook.com/marketplace/item/397602235025807
“Willys Jeep 1955 CJ 3B I am the third owner of this vehicle it’s all original except it has been converted to 12 V. I still have the original 6 V generator. I had the original vacuum wiper motor as well.also has a best topper Runs and drives good Also have the following spare parts which can be negotiated for: 4 extra rims with tires in good condition transfer case transmission front and rear axle Steel topper only covers half of vehicle”
UPDATE: **SOLD** WAS $1000.
This old racer has a fiberglass front clip that looks in good shape. The cage looks worth a few hundred as well. There seems to be some “sweet temptation” here.
“195ish jeep cj2 or cj3 tub. Has No engine or transmission. Frame appears to have been cut on the front? Fiberglass hood and front fenders one piece. No title, appears to have been raced or play in the dunes. What you see in the pictures is all I know”
This 2A has a variety of updates.
https://www.facebook.com/marketplace/item/513888486435879
“1947 Willys CJ2A “modified” This Willys was recently built by a Jeep enthusiast. The build has approx. 1200 miles but Jeep is still being driven around town. Everything thing works and there are no mechanical issues. Registered as an antique vehicle. The engine 2.5L 4 cylinder mopar EFI was recently purchased about 600 miles ago from Collin Bros.
Some modifications are:
47 CJ2A tub
CJ5 frame
D30 front axle with lunchbox locker (manual hubs)
D44 rear axle Solid diff covers
D300 transfer case twin sticks
31” BFG KM2 M/T Custom roll cage bolted to frame
New gauges
All LED lights Rock Lights
PIA fog lights
Lots of custom work here.
https://portland.craigslist.org/clk/cto/d/rainier-1948-willys-jeep/7391034797.html
“48 flat fender, 327 small block Chevy, Bronco running gear, 3 speed transmission, high low transfer case, warn manual locking hubs, 5000 lb warn winch. This jeep was built from the frame up. Lots of chrome and diamond plate.”
Lots of custom work on this stretched jeep. This may have a modified DJ-3A convertible windshield.
https://seattle.craigslist.org/est/ctd/d/issaquah-1952-willys-jeep-custom-off/7377672038.html
“This is an extremely custom 1952 Willys Jeep that has been extensively modified and is capable as a street, strip, or sand dune use.
It was a frame-off resto-mod project which features a boxed chassis, fabricated roll cage (certified), custom four link for rear suspension, and laser checked frame.
The engine is a professionally built (balanced and blueprinted) GM V8 Aluminum 406 ci / 7.0L block with aluminum DART heads, pro-comp high lift cam, Forged crankshaft/rods/pistons, and oversized oil pan. It has an Edelbrock intake manifold with 850 cfm Holley carburetor, Hooker headers with detachable mufflers/tailpipes
UPDATE: **Status Unknown** Was $26,000. The pics shown at the bottom are from an older ad, but are more comprehensive.
“49 Jeep Willys CJ2A show quality, great restoration project, every piece professionally done. SBC 383 stroke motor, turbo 350 transmission, custom 9” rear with 4.11. Stainless steel and chrome every where. Not for off road but could make it that way, more for cruising. Clean title in hand. Selling because I bought a new house”
Older pics:
It lacks an engine.
https://www.facebook.com/marketplace/item/223529036307712
“(Jeep, Ford, Willys, Alcohol, SBC, TH 400, power glide, CJ, five point, Dana 60, ladder bar, straight axle, Sand Dunes, Street Racing, Fiberglass) Clear title and collector plate.
MSD 7AL-2 with two step full wiring/gauges/switch panel. Dana 60 rear end/, 6:17 gears/with spool. 2WD Wheelie bars. Full float leaf spring suspension with ladder bars.
Reverse shackle with straight axle front end. 32 x 14.5 x 15, Rear tires: staggered Super Scoops with tubes, Front tires: Desert Track, by Sand Tires Unlimited. 12 point cage, five point harnesses, suspension race seats mounted on cage, Seat covers in excellent condition. Halon full suppression (extinguisher) system. No motor. Set up for SBC on alcohol or gas, plus power glide or TH 400.”
The winch is not included, but the Desert Dogs are. They appear in decent shape.
https://seattle.craigslist.org/est/cto/d/issaquah-42-willys-mb-jeep/7341133159.html
“42 MB Willys Jeep needs to go. (I need my garage back.)
Ford 302 (V-8)
Borg-Warner 150T (T-150) 3-Speed trany
Dana 20 transfer case (case marking #C18-15-24)
Front End: Dana 30
Rear End: Dana 44
Looks like a good build.
https://sacramento.craigslist.org/cto/d/el-dorado-1948-jeep-three-aa-flat-fender/7333259474.html
“1948 Willys flat fender has all the goodies 350 Chevy four-speed with granny gear 538 running gears smothers axles lockers power steering mint condition 14,925 miles.
Has a windshield and top”
This might have some value given the newer-looking rims and tires.
https://www.facebook.com/marketplace/item/2074916506007208
“Definitely a collector’s item. New tires, new seats that have not yet been installed. Lift kit”
This looks fun.
https://www.facebook.com/marketplace/item/844958499442461
“1953 Jeep built for Silver lake. Frame has beet stretched and boxed, custom roll cage, fresh rebuild 355 sbc, 350 hp, turbo 400 trans, 4k stall, 4.55 rear gear. Full Suspension done by GFW reverse Deaver springs, and fox shocks. Rips across the sand and I have over 20k invested. Asking 8500. 00 OBO.”
UPDATE: Still Available.
(04/02/2021) It’s a project or parts.
https://www.facebook.com/marketplace/item/207936907768892
“1949 Willis CJ. A2. Project rusty floors solid body heavy duty leaf springs on military chassis boxed frame”
UPDATE: Price dropped to $9000.
(01/13/2021) This is a little different build.
https://yakima.craigslist.org/cto/d/yakima-1953-willys-cj3b/7313317056.html
“1953 Willys high hood Buick 215 V8 motor brand new tires 35 inch 6 inch lift 12,000 pound warn winch light bar collector plates $10,000 or best offer comes with extra motor and transmission new wiring front to back done at Yakima battery”
This rebuilt CJ-2A has a fiberglass body.
https://www.facebook.com/marketplace/item/287802496099198
“This jeep has been with me over 12 yrs it is titled and platted in fl it has a built v-6 a 4 speed manual w- creeper gear it has it all from aluminum radiator lockers in rear full roll cage fuel cell remote battery with power disconnect”
This might have done some early racing at some point? Has a one-piece fiberglass front clip.
https://www.facebook.com/marketplace/item/123194343052664
“Needs some TLC 383 Stroker Chevy engine Chevy turbo 400 automatic trans. Model 20 transfer case Front and rear 373 gearing 4×4”
UPDATE: Price dropped to $2000.
(01/15/2021) This has no powertrain. Looks like a metal body with a fiberglass tilt front clip.
https://www.facebook.com/marketplace/item/443828039953439
“Jeep CJ5 body has NO engine or transmission was set up for Ford. Dana axles out of a scout they are locked have driveshafts has new 31 inch mud terrain tires mounted on Wagon Wheels also full roll cage mounted to frame has fuel cell mounted in rear new extended leaf springs also traction bars on rear front axle moved forward several inches also fiberglass tilt front end 2 fiberglass race seats MSD ignition box aluminum radiator power control box for ignition and lights an electric fan on radiator don’t miss out on this deal make it a great toy or racer There is no title off-road use only get it before spring so you can get it ready to play for the summer”
UPDATE: Still Available.
(01/12/2021) This has a nice roll cage, but has no engine. Appears to have Allstate/Husky hubs.
https://northplatte.craigslist.org/cto/d/north-platte-1948-willys-flatfender-jeep/7255612905.html
“1948 Willys Flatfender Jeep
Near new 31 inch tires, 5:38 gears, custom roll cage, newer set of axles with 4:30 gears, set up for small block Chevy, ‘68 Vette engine available for more money
Call for more information
Leave message if no answer
Call for more pictures
$2500.00 obo”
UPDATE: **Status Unknown** Was No Price.
(11/08/2020) Looks fast.
“Sand drag / Dune / 1/8 mile asphalt Drag. Bb Chevy. Call.”
UPDATE: Still Available.
Lots of updates to this custom build. The body appears to be from a DJ-3A Convertible or a Surrey. The front frame rails have a curious shape; the chassis may not be a jeep chassis.
https://www.facebook.com/marketplace/item/582389092458452/
“Old Navy jeep, 4.3 v6, 700 auto trans, power steering and brakes, heated seats, S10 ft clip and rear end ”