Seems a pretty good price for a race-ready rig.
https://www.facebook.com/commerce/listing/715250883633180
“Ready to race, complete w/ 6.0L Built Turbo 400 BigShot plate consistent 4.40’s in 300′ comes with Paddle Tires only no Boggers”
Seems a pretty good price for a race-ready rig.
https://www.facebook.com/commerce/listing/715250883633180
“Ready to race, complete w/ 6.0L Built Turbo 400 BigShot plate consistent 4.40’s in 300′ comes with Paddle Tires only no Boggers”
UPDATE: Still Available. The owner made some stylistic changes since this was last listed.
I thought I had listed this previously, but I can’t find it.
https://www.facebook.com/marketplace/item/675607213800907
“Extended frame.468BB 177 procharger . New th350 . 9″ 410 posi .new brakes,tall shifter,carpet,door panels,u joints,tires, ect..turnkey w/build folder and clear title”
Sounds like it has been lightly used.
https://www.facebook.com/marketplace/item/1012689622854152
“1968 Chrysler 440 engine, 30 over New balance rotating assembly Forged pistons Rebuilt heads, double spring valves Baffled oil pan, extra capacity (rare) Milidon oil pump, pressure to block, return back to pan Cam 4400 low end, 7200 high end Holly 1350 CFM carburetor Nitrous 300 shot fogger system MSD 6 AL ignition High RPM Power steering pump 2 magna flow fuel pumps 4 wide five wheel adapters Mud hog cut tires on front 35” Bigger digger paddles rear 35” 5.89 gears on front and rear SCS gearbox (transfer case) 3 speed 727 transmission, reverse shift pattern Fiberglass jeep racing body Both engine and transmission rebuilt in 2016, only has a total of eight passes in four events, two of those were nitrous. Worked very well, asking $15,000 OBO”
Nice looking build.
https://www.facebook.com/marketplace/item/457833389787526
“Sand drag jeep ready to race, 4wd, 434 small block with a 400 and 250 shot of nitrous, ran 3.70 with 400 only then added 250 with separate fuel system and haven’t ran yet, built power glide trans, full electronics with trans brake and shift control, goes straight down track, selling for a friend”
UPDATE: Now priced at $12,500.
(04/25/2022) This nice looking 3B drag jeep looks like a fun ride.
https://seattle.craigslist.org/oly/cto/7538036797.html
“Hot Rob jeep looking to trade for boat or??? Value must be around 18,000 send pics and description of boat.
The jeep has a 355 small block chevy 10.5 to 1 compression ratio. Big cam single plain intake manifold 4 bolt main. 750 brawler carb. MSD distributor and 6AL ignition box. Around 400hp turbo 400 transmission 3000 stall speed converter. Ford 9 inch rear end. 4 link with coilovers. 5.38 gears. Griffon aluminum radiator, holly electric fuel pump bucket seats with 4 point harness. Rear tires are 33×21.5×15 Hoosiers and fronts are 29×12.5×15 Hoosiers.”
This drag jeep is named “Wicked Willy”.
https://www.facebook.com/marketplace/item/2860049174303406
“This is a nostalgic Jeep Willy’s sand dragger with a clear title and matching VIN number. Small block chevy engine with a 350 turbo transmission. MSD 6AL ignition. Lots of good parts. Ford 9 inch rear end. 4link suspension and coil overshocks.”
This might have been rebuilt for drags of some type.
https://www.facebook.com/marketplace/item/370692988552838
“1977 CJ5 304 on vin. Has the 4×4 dep in ft no transfer has the AMC v8”
This has a bunch of mods.
https://www.facebook.com/marketplace/item/416691679967391
“1943 Willys Jeep 2 wheel drive Small block 383 Chevy Dual tunnel ram high-rise Board 60 over a camel humpheads Roller rockers has old school motor circle track Turbo 400 transmission 513 gears in rearend super scoops on the rear no rust holes or rust in the floors bought steel body kit for $5000 clean solid hard metal military frame numbers I Have lots of time and money so please don’t waste my time $14,000 is a fair price for vehicle like to use for sand drag Jeeps Brand-new five point harness It has a special place where it can be driven on the road for cars shows Downsizing husbands things he can’t drive anymore”
Looks fun.
https://www.facebook.com/marketplace/item/515691630182897
“Very clean sand jeep for sale. This was built by Bolton’s Welding out of Placerville, Ca. Mike has built a number of quality sand jeeps through the years.
Motor is a 383c.i. that we ran in our dragster for years. It ran 3.60’s in the 100yds and won multiple championships. North of 650hp. Motor was freshened and sold to a friend who never used it, and I ended up buying it back. – AFR 227 Heads – AFR Titan Manifold – Bowtie Block – Yellow Terra shaft rockers – Wiseco pistons – Callies rods – Callies crank – QuickFuel 1000 carb
Brand new TCI Powerglide tranny w/ 5000 stall converter, Dana 60 rear. 20 gallon fuel cell. MSD ignition system.
Floorboard and firewall are polished aluminum. Paddles are essentially new.
Jeep ran 3.94 in 300′ in it’s first full pass and then was involved in an accident that twisted the wheelie bar up. Would need a new wheelie bar to use on the track. No other damage.
Bought the jeep to use at the track and dunes, but I moved to Seattle and we have four other race cars and not enough time or space currently for this one. This jeep is honestly immaculate, pictures don’t do it justice.
Will sell as a roller w/ tranny for $14k. Wouldn’t hurt my feelings to keep the motor, it’s our favorite engine we’ve ever had.”
UPDATE: Still Available.
(10/23/2022) Seller also willing to bundle for sale with a trailer for the right amount.
https://www.facebook.com/marketplace/item/2868455066784799
“1978 cj5 drag jeep. 305 bored 30 over. Complete engine build set up for NOS. Chevy rear end linked to a turbo 350 transmission. Complete two piece fiberglass body. $7500 obo can bundle in a trailer for the right amount as well”