Only two pics provided. Appears to be a nice build.
https://www.facebook.com/marketplace/item/350448154132395
“1957 willys cj3b my uncle built aprox 60 years ago. 327 chevy, Muncie 4 speed. Zero rust. garage kept has overdrive.”
Only two pics provided. Appears to be a nice build.
https://www.facebook.com/marketplace/item/350448154132395
“1957 willys cj3b my uncle built aprox 60 years ago. 327 chevy, Muncie 4 speed. Zero rust. garage kept has overdrive.”
UPDATE: Price dropped to $8000.
(10/09/2022) This has some mods.
https://www.facebook.com/marketplace/item/936790078451223
“Hi there, for sale is my 1947 Willy’s Overland CJ2A. This little jeep has been an awesome vehicle, and doesn’t need much. It has the F-Head Hurricane Willy’s engine that was torn apart and completely gone through, along with the transmission and transfer case. Gaskets and seals were replaced and fresh oil throughout the drive train.
This will start on the first crank even after sitting for a couple weeks. The differentials have fresh fluid and the manual hubs have been gone through.
The transfer case has a high and low range Newer drum brakes and it stops reasonably well.
I drive it all over town and have had it on the freeway for short periods. It will go 35 great, but should probably get some new tires if you plan on long freeway trips.
The Jeep is coated in a Linex type coating that is extremely tough. No rust on the Jeep, any old spots were cut out and repaired by the previous owner. Asking $8,500 open to trade offers.”
It looks like it was made from an M-38 body. It’s got a fiberglass front clip. 2WD only.
https://www.facebook.com/marketplace/item/1504525147070494/
“52 Willys Jeep Aluminum headed 406 small block Chevy, Pro comp heads, Crane rockers, Edelbrock Victor intake, Holley HP 750, all new MSD ignition w/ digital 6 box, built TH350 trans with trans brake, trans blanket, B&M pro ratchet shifter, Currie 9” Ford rear end with 5.57 gears on a spool, 4 linked front and rear with coil overs, 2 wheel drive, Cherokee front axle with disc brakes, fuel cell, race seats, VDO gauges, tilt column, new wheels and tire all around, rears are new Hoosier DOT legal slicks. Fiberglass front clip, Aluminum radiator, Been sitting the last 2 years, needs fresh gas, a new battery, and timing set (All new ignition) Easy project, super cool street rod, or sand drag Jeep. Title in hand. $10K FIRM, This means I won’t take any less. Offers will be ignored. may consider old car, drag car, muscle car, jet boat trade. No trades for newer cars, trucks, shitty tattoos, or pot.”
Someone went all out with this rebuild.
https://www.facebook.com/marketplace/item/3678135442466654
“1976 Jeep CJ 5, 304ci V-8, Custom headers, 4 spd (Granny Low), 3.70 (stock) rear end, Fiberglass Tub(all other steel is Jeep o.g.), Original Jeep hardtop, Full frame off restoration finished in 2010, Rebuilt Engine, Trans, Rear End, Brakes ect. 12,000 miles since restoration, Have original bumpers, Have back seat(matches front seats), Custom Straight Line Interior. $14,000”
UPDATE: Price dropped to $21,000.
(01/14/2024) Thanks to Mike for sharing this Fresno-area modified flat fender. It’s got the stylish doors, the muller top, and many other updates. Note the care taken to build the front drive shaft around the automatic transmission.
https://fresno.craigslist.org/cto/d/fresno-jeep/7705250995.html
“I have a custom 1943 Willy’s for sale. She is powered by a Chevy v8 350 with a t350 automatic transmission and a split transfer case. Chevy rear end with 3.73’s. Custom removable vinyl windows and roof to make it a fully convertible vehicle. Steering box was pushed forward to accommodate the power steering, custom made drivelines to GM front and rear end. Everything from suspension to interior and paint has been customized and done right. Everything on this rig works as it should. She is a 4×4 Hotrod that gets tons of looks and compliments!”
UPDATE: **SOLD** Was $13,000.
This modified sedan delivery is “Goin’ Bananas”.
“1949 Jeep Willys, it runs and I have title in hand. Great project car. Selling as is. Currently has a 1987 Chevy S-10 blazer motor installed.”
This one has a very “grain-ular” design.
https://www.facebook.com/marketplace/item/2005745376447437/
“Fully restored 1948 Willy. Everything works like new. Ford engine, New tires etc. Ready for take off. Come take willy for a drive”
Given the windshield and the rear bumper, I have to wonder if this wasn’t originally a Fresno area designed jeep. The interior dash has some custom aspects.
https://www.facebook.com/marketplace/item/1415929289134882
“This vintage 1949 Willys CJ 3 Jeep is a true gem with only 60,112 miles (Chassis) on the odometer. It’s been lovingly modified with a powerful Chevy 350 engine. If you’re looking for a classic with modern performance, this Willys CJ 3 is the perfect choice. Whether you’re an off-road enthusiast or simply want a unique and eye-catching ride, this Jeep has it all.
Don’t miss this opportunity to own a piece of history with a touch of modernity.
– VIN – ID42542COLO
– Tuffy Box center console
– 4 Speed w/ Overdrive
Upgrades:
– 11” Flywheel w/ Center Force Clutch
– Chevy 4 Bolt Main 350 ( 200 miles on Motor)
– SM 465 Chevy Transmission w/ Advanced Adapter
– Ring & Pinion 4.88 Front and Rear
– Warn Winch model 8274 w/ Remote Control
– Warn Overdrive
– Axles Dana 27 front / with Posi Warn Locking Hubs
– Rear Dana 44 / Full Floater Axles w/ Posi
– Air compressor w/ tank outlet gauge & shut off
– Stainless Steel on Firewall / Bumpers / Wheel Wells / Gas Tank (28 Gallons) Motor Mounts / Skid Plates / Radiator Mount / Battery Box / & Transmission Cover
– No Test Drives
– For sale by: Evolve Automotive”
UPDATE: **SOLD** Was $22,500.
(11/14/2023) Good looking build.
“Sand drag/dune jeep , full fiberglass body , 4 bolt main 468 , bbc 13.5 to 1 , JE pistons ,6.135 H beam rods , 4340 eagle steel crankshaft, dart pro 1 aluminum heads , solid roller cam , roller rockers stud girdles , 1050 dominator carb on e-85 by mark sullen ,fogger nitrous system , power glide transmission with break. 5300 convter , biondo racing electric shifter , msd 7Al 3 ignition box , hvc black coil , pro billet distributor , magna fuel pro star 500 pump , magna fuel regulator for motor and nitrous , dana 60 rear end with spool , 4 link front and rear , 15×18 wheels with 20.00 rear paddles , desart tracks 12.00 on front , crow harnesses , kirkey aluminum seats , jeep is very easy to drive great bracket car/ dune jeep, call for more information and details”
Looks like a great wagon.
https://www.facebook.com/marketplace/item/1725560171225269
“”REDUCED” Titled as 1947, probably a late 50’s, Willys Panel Wagon with 4-cylinder Hurricane motor, 2wd, 3-speed on the column with a B-W overdrive. I got it on a trade, looks like they did a good job with the restoration. It’s solid, runs and drives great, everything works. A real head turner. I installed front disc brakes for safety, new rear drum brake shoes, new glass in doors, new carburetor and a backup camera. Decals can easily be removed. Interested in TRADING for a mild v-8 vehicle that is HWY drivable long distance. Will consider 50s – early 90s chevy trucks, prefer auto trans with a/c. Must have a clear title, not just a bill of sale. Located in Bismarck, AR. Three three seven 2630696″