To Top

Memorial Motor Madness Hackettstown, NJ May 25th 2025

May 19, 2025 • CATEGORIES: Event This site contains affiliate links for which I may be compensated.
0

UPDATE: 5/19/2025

Show is coming up quickly, in addition to the normal goodie bag for entrants. I will be out there and will have some small things to give to any Willys folks who stop by and check out the show. You don’t need to bring a Willys it’s a great family friendly event. Hope to see you there. 

This is an awesome show, we had a few Willys out last year and had a good time for a great local organization. I’ve been going last 6 years as a volunteer. Mars Wrigley does a wonderful job and always lots of give aways and family friendly event.

29th Annual Car Show – Sunday, May 25, 2025 Mars Wrigley 800 High Street, Hackettstown NJ 07840 Makers of M&M’S® Chocolate Candies

https://hackettstownrotary.org/

 

 

Fb-Button
 
To Top

1963 Jeep Willys J series $1,500 Fisher, WV

May 19, 2025 • CATEGORIES: Willys Trucks This site contains affiliate links for which I may be compensated.
0

1963 Jeep Willys J series $1,500 Fisher, WV

Not the best pics, but it looks early maybe a 230 is hiding under the hood?

If you have the need this is a good price point for a rig like this.

I would go see this one, has the Willys ID tag so it should be an early one is my thinking.

Information from seller:

Ran and drive into shop several years ago. Newer engine, same driveline. Rear axle was removed and scrapped. A 14 bolt goes with it but not installed. I had title but have been through most of my stuff and still haven’t located. No bed. Surprisingly little rust for its age. Currently stored in moorefiel west virginia, and I live in pa

https://www.facebook.com/share/1AVcXn4TTf/

Fb-Button
 
To Top

1950s Willys Jeep $500 Swanton, MD

May 19, 2025 • CATEGORIES: CJ5 This site contains affiliate links for which I may be compensated.
0

1950s Willys Jeep $500 Swanton, MD

Ran when parked, maybe?

There is also a good thread on OWF called “Rusted to the Ground” it’s a good read.

Couple parts here the one looks to have a top, some horns and oil filters, some good stuff here for the price if you have time to go pull some out of the weeds.

Information from the seller:

Early 1950’s. Willys

https://www.facebook.com/share/1BdUNziAAm/

Fb-Button
 
To Top

Studded steering knuckles for Willys Jeep CJ Dan 25 $175 Bismarck, ND

May 19, 2025 • CATEGORIES: Uncategorized This site contains affiliate links for which I may be compensated.
2

Studded steering knuckles for Willys Jeep CJ Dan 25 front axle. Used Allen head button type bolts $175 Bismarck, ND

Looks like a good price point, it’s a good upgrade for your knuckles for sure.

Information from seller:

Willys Jeep Dana 25 studded steering knuckles. These knuckles have been upgraded to studs instead of the weak bolt style that tend to strip out and pull out of the knuckle. Located in Bismarck, North Dakota, would ship

https://www.facebook.com/share/1AGDFWvJyd/

Fb-Button
 
To Top

1940’s Jeep Willys $500 Stillwater, MN

May 19, 2025 • CATEGORIES: CJ-2A, CJ-3A This site contains affiliate links for which I may be compensated.
2

1940’s Jeep Willys $500 Stillwater, MN

Posting the year as per the seller information, someone may be able to dial this in a bit by some of the pictures. Does not take much to get to $500 for a parts rig, what do folks think on this one?

Dial in the year and will update this one.

Information from seller:

Willys jeep rolling chassis for sale. Been sitting for many years and is taking up space I need. Would make a cool restoration or rat rod, very simple chassis. No title. Need gone asap, no trades. $500. Located near Milltown WI

https://www.facebook.com/share/16bBJ3Z3PY/

Fb-Button
 
To Top

1962 Willys Jeep CJ5 $8,500 Baker, MT

May 18, 2025 • CATEGORIES: CJ5 This site contains affiliate links for which I may be compensated.
1

1962 Willys Jeep CJ5 $8,500 Baker, MT

Really solid rig and decent price on this one.

1962 Jeep CJ5 Willys Hard cab 134 hurricane engine – runs good -brand new carb -new starter -new rear main seal New front drive shaft Newer tires Good seats Winch On board air compressor $8,500obo

https://www.facebook.com/share/194fTLUAHq/

Fb-Button
 
To Top

1949 Willys Jeepster (restored) $22,980 Dealership  ·  Anoka, MN

May 18, 2025 • CATEGORIES: Jeepster This site contains affiliate links for which I may be compensated.
0

1949 Willys Jeepster (restored) $22,980 Dealership  ·  Anoka, MN

Druk has a few Willys in our Catalog so the folks over there may have some good knowledge on the Willys line up. This is a really sharp Jeepster, looks the part. Jeepsters pull a good dollar as well.

Information from Seller:

1948 Willys Jeepster * This vintage beauty combines rugged charm with open-air freedom, perfect for cruising backroads or turning heads at car shows. Powered with a ”Go Devil” 134 4 cylinder engine and 3 speed manual transmission. It drives excellent. Very nicely restored inside and out. The miles are shown at 45,102 on the odometer. The headlamps work and turn signals work. It has the complete convertible top with side windows. Top is in great condition. Whether you’re a collector or just love unique rides, this Jeepster delivers fun and nostalgia in every drive. Clean title. Make this unbeatable deal yours before its gone.

https://www.facebook.com/share/1MdSHNTJuC/

 

Fb-Button
 
To Top

1947-48 Listed as a 1950 Willys Truck SNOW PUSHER $3,250 Mekinock, ND

May 18, 2025 • CATEGORIES: Willys Trucks This site contains affiliate links for which I may be compensated.
1

1947-48 Listed as a 1950 Willys Truck SNOW PUSHER $3,250 Mekinock, ND

This one is listed as a 1950, and who knows what it was titled, its on a Bill of Sale now so unknown. But the gauges look to be mid 47 to fall of 48 with the silver 0-80 speedo. As we know that could have been changed out and its not super clear, but it has vent windows so its atleast a ’47. Anyone else want to toss in a guess go right ahead.

The frame has the typical snow plow bend to it, it looks to have a decent set up on the Plow part.

Should be a good little work truck.

Information from seller:

SNOW PUSHER 1950 WILLYS 73 FORD PINTO MOTOR 4X4 HIGH LOW GEARS 7.6 PLOW ELECTRIC LIFT RUNS GREAT WORKS GREAT $3500 CASH BILL OF SALE CALL[hidden information]$ INFO RUSTY BODY HAS BLOCK HEATER NEW RADIATOR & ICM & BATTERY

https://www.facebook.com/share/16FcEF1W5p/

Fb-Button
 
To Top

Vendor Spotlight: William Work Automotive Reproduction Parts

May 18, 2025 • CATEGORIES: Vendors This site contains affiliate links for which I may be compensated.
0

William Work Automotive Reproduction Parts

William Sparks has a neat company that makes Automotive Reproduction Parts for Willys, Jeeps, Ford, and International.  (maybe you have a need that is similar but different model cant hurt to ask about your project!)

There are door cards for most versions of Willys, some specialty trim part, interior hardware and even a selection of replacement Glass.

Check out some of his products, and see if they would be a good fit for your project.

Updated: ABS Panels are available please check out our post on those here:

https://www.williamwork.com/product-category/wwautoparts/

 

If you have a Willys related website or venture and would like us to spotlight it there is a Contact Us on the sidebar. If you link to eWillys please let us share your website as well. As I find links I add them to the sidebar.

 

Fb-Button
 
To Top

1949 Willys Wagon $2,000 Eagle Mountain, UT

May 17, 2025 • CATEGORIES: Willys Wagons This site contains affiliate links for which I may be compensated.
1

1949 Willys Wagon $2,000 Eagle Mountain, UT

Lots to unpack here on this project. If you wanted a head start on a small block swap this may be worth a call and go see this one.

Information from seller:

1949 Willys overland wagon with clear title. Completely torn down and ready to be built the way you want it! Has been set up for an LS engine with Novak Conversions motor mount brackets and front crossbar/grill and radiator mount.

The engine is not included but has been fully fitted and run in the car. This is one of the only LS Conversions on a Willys that doesn’t have a cut up firewall. I do have a sbc 350 that can go with it. Also have a custom aluminum gas tank It was complete when I bought it and I kept everything that came off except the drivetrain.

The dash has not been cut or modified. The only cancerous rust is on the rear fender, some on the driver floor and the tailgate.

I also have a 1957 wagon with title that has a lot of rust that can go with it for parts if you want it. Not in a huge rush to sell but I know I won’t get to it for years now that I have a baby on the way so make an offer.

https://www.facebook.com/share/15wcQobuGf/

Fb-Button