1963 J-200 $2,500 Clarkston, MI

230_OHC Engine, Willys Data Plate, J 200, Eariler Production from SN: 10,886. PTO Winch. What a difference from the Willys Trucks of 1963! Grill, Badges, Air Cleaner, all there and in great shape in some cases. It has rust for sure all over.

Information from seller:

1963 Jeep Gladiator J200 4×4 Clean Title Rolls and steers for loading. Original Tornado 230 OHC engine still in place. As well as untouched original trans and PTO winch Jeep willys door tag. Truck is complete and rolls/steers. Tires even hold air. Does not run and will need full restoration. Body has beautiful patina and rust in the typical areas including floors. Bed, sides, and ORIGINAL TAILGATE are present and solid for the age. Has an original heavy-duty winch setup on the front bumper (likely Koenig or Ramsey). Great period-correct piece. Interior dash is complete. Windshield Glass is intact. Frame looks solid in the visible areas. Good candidate for a patina build, restoration, or donor. These early first-generation Gladiators with the Tornado engine are getting harder to find, especially complete with a title. Note not 4 door Unfortunately need it sold as soon as possible. Good project for a restoration. Located in Clarkston, MI. $2,500 Possible trades LMK

https://www.facebook.com/share/1Fv1VhecFS/

1953 Willys Truck $2,500 Redwood Falls, MN

Project rig. Might look neat with some stock wheels. Patina for sure, might be a tad moldy inside, be careful out there. Not sure what the seats are out of. Some extra knobs and cable pulls on the dash, has some sort of Radio.

Information from seller:

This is a 1953 Willys jeep pickup in pretty decent shape. There is currently no engine and I have the stock wheels, restore or make a rat rod or use for lawn art. Also has a vintage Western snowplow that can go with it and I know where there is an engine available for $400. Have title available.5zero743zerozero324. Price is firm possible trades. It looks like someone possibly had a small block in this. At some time there are motor mounts. Welded to the frame, but I have no idea what it would have been.

https://www.facebook.com/share/1BS4U4RUBB/

1952 Willys Truck $6,500 Waseca, MN

Going to be posting some older listings that are still up will try to add how old these are first some of these might be long gone but still never know. Will be building up some stock for the Holiday week.

Listed 11 weeks ago, they are selling for a friend so this is 4^th party here at this point on my end, quality of lead for a listing I give it a 4/10 stars.

F-134, listed as extra parts come with this which is a challenge at time if you don’t have physical room for spares.

I’m torn on the spares at times, I tend to take anything and everything to a fault then I wind up with tons of crap that needs a home. I do know Willys folks who have a nice collection and it does not include all the junk (rusty gold really)  like I have, and I don’t even think I have a lot of stuff compared to thousands of other people.

Information from seller:

1952 Willy’s pickup, runs and drives good. have a separate frame with spare rear end and trans. 4 cylinder. Have owned for 14 years no time to drive. Selling for a friend call or text Randy at

https://www.facebook.com/share/17ZGyp29LG/

EDIT> Rick pointed out the 2 Batteries, I think they are in Parallel, not sure. Looking at some stock photos from Deka the positive shows in the front right when the label is in the front, and they look to have paralleled the 2 positives. The ground on the drivers fender is probably not my first choice of a great “ground”.

See this pretty poor mark up. Yellow Neg, Red Positive. And I can not see the connections at the engine at all.

Nice catch for sure on this set up.

1952 Willys Truck $22,500 Okeechobee, FL

Lots of Easter Egg’s here to look over the details of this Custom Rig, someone looks like they had a lot of fun putting this one together. 460 / C6, that’s nuts. So much detail work done to this, but at the same time I would want to make this your own.

Here is my version of this, I think it’s about $8k in changes and freshen this up a bit.

• Safety Check, Tune Up and Service, check out the frame and suspension work performed to make sure anything that needs to be addressed gets addressed.
• I would go back to the Willys parking lights up front.
• Rear roll pan is gone then go back to nice simple NACO in the back.
• Same for the interior go back and retrofit the OEM gauges to the 460 not hard there. Might be easier to use a ‘47 – ‘50 Rectangle Gauge set.
• Interior all wood would go away.
• Seats may have to stay but recover.
• Door cards would come from William Work and make more OEM looking.
• Wheels would get US Wheel to make some custom based on the need there so they look more Stock, play with the ratio of the front tire a bit if able. Front is too small for me.
• If they have the paint code for the brown I would look to add the beading to the bed steps like the original, that’s a really nice touch not many would notice, but when its not there I think it stands out as a flat step.
• Mirrors would be replaced with an original single stock single arm simple circle one.
• Tailgate I would go standard “W” gate out back. If this is a narrow custom bed, would just source a re-pop then, would do stock chains and the sort

Information from seller:

Willys jeep pickup, 460, automatic transmission c 6, power windows, Detroit locker rear, three link rear axle, power windows, radio, two tone paint, ac, disk brakes, tilt steering

https://www.facebook.com/share/1GmjcNQAHv/

1962 Willys Truck $12,000 Dagsboro, DE

Not sure it “fits” too many large and tall folks perfectly (I am very guilty of just tossing in some anecdote like that all the time, like every day!) , not much detail on this ad, kind of makes me suspect of the ad in general. But the seller looks to have some other ad’s up and then the profile is from 2016, so I try to check what I can here, but with zero details, never know. Photo search does not pop up any other cross posting or stolen pics.

When it comes to Willys Trucks specifically I highly recommend you sit in one prior to buying, and driving if able, they are not roomy rigs. I have had one for 31 years so I’m used to it, unfortunately I’m not the same size as I was at17 anymore! But seriously sit in and drive a truck prior to buying is my highest recommendation, if you don’t fit, don’t be surprised, get a Wagon or 2!

Should be a 226 Truck, my guess 4.88 ratio rear, has an OD from the looks of it.

Information from seller:

Now this is a unique vehicle. Take a good look at this classic and picture yourself in it. It fits you perfectly. She just needs a little TLC and she will always love you. Come holler for more info

https://www.facebook.com/share/14NYCLNMK53/

1952 Willys Truck $5,000 Hot Springs, VA

OBO, actually looks pretty good, dark pictures but maybe in the light can take a look.

Information from seller:

52 Willy’s truck body and running gear seem to be in pretty good shape needs engine or rebuilt too many projects I do have seat and clean and clear VA title any questions or additional pics just ask $5000 OBO

https://www.facebook.com/share/1Cpn2XQ5rq/