Glenn shared this one.
“Complete rear winch assembly for Jeep CJ; includes: transmission PTO, shaft, and carriers for winch”
https://albany.craigslist.org/cto/d/willys-parts/6234025244.html
Glenn shared this one.
“Complete rear winch assembly for Jeep CJ; includes: transmission PTO, shaft, and carriers for winch”
https://albany.craigslist.org/cto/d/willys-parts/6234025244.html
UPDATE: **SOLD** Was $21,900.
Craig spotted this wagon that’s had lot of work done to it.
“1959 Willy’s 4×4 panel delivery restored and modified new 350/330 Chevy crate motor turbo 400 automatic runs and drives excellent take it anywhere!!! I have 14000 miles since restored been to many many car shows gets a lot of attention! ”
UPDATE: Still Available.
(02/24/2017) It’s a project with work remaining.
“For sale is an unfinished project I built, finished, than took it apart for major changes. It’s been sitting for a few years and I just don’t have the time to give it.
1948 Willys CJ2A
– 350cid, 4 bolt, Jasper engine assembly with less than 20,000 miles. TBI fuel injection. Never finished wiring. PCM and all sensors. MSD HEI distributor. $500
– shorty headers wrapped $150
– Ford T18 manual trans with Chevy bell and 11” clutch. Has super low first gear. $750
– Jeep Dana 300 with stock gears and twin stick $300
– Dana 30 3.07 front out of a CJ7. currently installed spring over. Have new 4.56 still in box. $150
– Dana 44 front out of early bronco with weld on radius arm brackets. Has gears no shafts. Don’t know the ratio. $150
– Scout Dana 44 rear. All new internals. 4.56 gears. Alloy shafts. Spool. Disk brake caliper brackets for Chevy calipers. $600
– spare frame $100
– chassis, body, cage, bumpers, seats $750
– bolt on grille hoop $100
– tool box $100
– 5 Auto meter gages $125
– jegs ignition switch panel $60
– RCI fuel cell with hole cut for TJ sending unit $125
– griffen aluminum radiator on custom mount with electric fan (Taurus) $300
– five 34×10.5 super swampers. 4 are practically new, probably 10 miles on them. White wagon wheels with weld on stiffeners. Staun internal bead locks in all 5. $1700.
– ruff stuff specialties dual triangulated 4 link kit. Partially assembled. Not finished.
– custom heavy duty driveshafts made by axle exchange. Cost over $1000 new. $600
– plated rear frame. Custom poly motor and trans mounts. Custom bent exhaust, wrapped about half way.
I’m probably forgetting some things.
This project needs the rear suspension, fuel system and exhaust sorted out to be completed. There will be some odds and ends of course, but those are the major hiccups. It’s been garaged for about five years. I want the space back. Will deliver entire project within in 100 miles of 07422 if you come and check it all out first for $4500. ‘
https://newjersey.craigslist.org/cto/d/willys-cja-custom-off-road/6211923860.html
UPDATE: **SOLD** Was $1400.
“organized pile of mostly original CJ2A parts, tub patched but sturdy, frame looks solid, new rear springs, will be rollable, good start for a project. NO motor, NO tranny (sold separately), NO title, NO Text, Cash Only. $2500 if parts sold separately”
UPDATE: Price dropped to $2700.
(06/06/2017) it’s a project.
“1949 Willys all original- motor (bad rings), driveline, trany, transfer case, axles, chassis. Good 32 inch tires. Extra Chevy 4.3 Vortex motor with resurfaced heads complete with computer. Clean title on non-op. Solid project Willys.”
https://fresno.craigslist.org/cto/d/willys-ja-original-with-an/6161664154.html
<– Day 7: July 27, The Lonely Road Home | Day 9: July 29, At Dawson Creek –>
On the 28th, Hugo, Fernando, Ann and I had a day without driving, a nice reprieve from our road trip thus far. But, we kept busy cleaning vehicles and organizing for the trip’s start.
As of midnight the 28th, we still awaited the arrival of Merlin & Britt and Andreas Gruson, Marcello, and Dario. However, everyone else arrived during the day, exhausted. So, we had a small celebration and got to know everyone. Since it is Ann’s an my 5th wedding anniversary, I’ll keep this brief.
We can’t wait to start! Only 1300 miles before we reach Fairbanks!
<– Day 7: July 27, The Lonely Road Home | Day 9: July 29, At Dawson Creek –>
It’s was our 5th anniversary last night, so I enjoyed some drinks and will spend the evening with Ann. I’ll update everyone on the trip Sunday morning.
<– Day 6: July 26, Almost to Dawson Creek | Day 8: July 28, Travelers Arrive –>
Today was a roller coaster of emotions for Scott and Bob. They started the day finishing up the reinstall of Scott’s engine. With that done, they fired the engine in excitement, only to be plagued by fuel pump issues. Faced with yet another challenge after a week of challenges, they plunged ahead and solved their fuel pump issue, successfully getting themselves on the road.
If only for a short time, they were on top of the world. For seven days they faced trial after trial, long night after long night. Ulysses would have faded under such circumstances. When they finally fixed the wagon Thursday evening, they were fired up as you can see in this photo ….
Triumphant, they roared down the highway, unstoppable … for almost 20 miles or so, before the engine faltered again, this time disabling the wagon. Unable to go any further, they concluded the trip was over for them.
We are all saddened by the news, because Scott was a major force for the creation of Alaska Or Rust in the first place. He and Bill both talked me into it. Meanwhile Bob was our treasurer and handled other logistical issues. The trip will not be the same without them and both will be deeply missed. They are now back in the states, ready to return home.
================================================
The day was full of other heroes, too. Russ and Cowboy drove to Dawson Creek with Charlene, becoming the first Alaska-Or-Rust team members to reach the beginning of the trek. Instead of staying, they parked Charlene at our motel, then roared southward, their truck towing an empty trailer meant for Scott. Russ felt that Scott and Bob deserved to be in Dawson and they’d drive all the way back to pick them and their wagon up if necessary.
As you can imagine, Russ was ecstatic when he learned that they’d gotten the wagon running again. But, he was soon heartbroken when they Scott told them to turn around, that he and Bob were finished. So, kudos to Russ and Cowboy!
================================================
From left to right, Merlin, Britt, Emily and Joe
When Scott and Bob broke down a few days ago, the four heroes above changed their course to pick up Rick so he could make it to Alaska. Together, the five of them had a good time in Glacier National Park on Thursday. When they left to cross the border, Rick ran into a technicality that didn’t allow him to cross. Left with few options, Merlin and Britt drove Rick down to Great Falls, Montana, so Rick can fly up to meet the group in Fairbanks when they arrive. Meanwhile, Merlin and Britt turned around and went back to Canada. It was a LONG day for them. At least they got some good pics.
Nice build.
“1948 WILLYS HOT ROD PICKUP WITH WILLYS TITLE. 2X3 FRAME, CUSTOM BED, SBC 355, XE 274 COMP CAM. THW 2500 STALL, WELDED WHEELS,S10 REAR, 2 LINK AND COIL OVERS, FRONT DISC BRAKES, BOMBER SEATS. PROFESSIONAL BUILD.”
https://atlanta.craigslist.org/nat/cto/d/willys-hot-rod/6234963171.html
UPDATE: **SOLD**
Seller has at least five jeeps that I see. The ad is a few days old, so I don’t know what’s left.
“1940’s Willys cj2a jeeps universal open body several parts jeeps and extra parts
There’s one 1959 cj5
Tubs fenders hoods seats radiators rear ends front ends transmissions transfer cases original wheels windshields (split and one piece) engines Go Devils, Super Hurricane 6 cylinder one F head
Too much to list so text between 7:30am-10:00pm if you want something I didn’t mention.
All the parts will sell under eBay prices if you need an idea price wise.
Text me for more info/pics I don’t carry the phone with me all time so might be a delay responding.
If the ad is up stuffs still for sale don’t hesitate because it’s going fairly fast.”