It appears this is a free jeep. That’s a good price!
“1948 Willys flat fender jeep rolling chasis with axles, tires, tranny, t-case. Great for project or for the rare spare parts.”
It appears this is a free jeep. That’s a good price!
“1948 Willys flat fender jeep rolling chasis with axles, tires, tranny, t-case. Great for project or for the rare spare parts.”
This looks like a fun little CJ-2A. I wonder if the bars attached to the windshield from the roll bar are intented to support the windshield? It’s a good strategy to help reduce stress on the windshield.
“Bright yellow.12 volt conversion with new 1 wire alternator.rebuilt starter, all light including turn work great. Has stoway towbar that folds flat on front bumper.(NO TOP) new master and brake cylinders. Tires are larger radial on white spoke wheels(NO SPARE) New e-brake cable yet to be installed along with 4 leaf after market springs.”
This looks to be a good foundation for a great little trail jeep. Though this is a non-running project at this point, it does have a number of quality upgrades.
“46 willys,1962 buick 198 v-6 rebuild 1 hour run time,sm 420 trans,5:38 gears,dana 30 disk brake,dana 44.lots of new parts,16 gallon fuel cell,frame boxed,power steering and power brakes.rear brakes are 11 inch.needs a few things to drive this rig.”
It’s hard to tell much from this photo.
“Engine – Buick V6. Full roll-cage, custom roof-rack, new seats, new frame “boxed-in”, tow bar, custom fuel tank with skid plates, 456 gears, 2 gas can racks, disk brakes, Detroit lockers, diamond plate body guards, aluminum rims (tires in good condition), high lift jack etc.”
This is a nice looking CJ-3A.
“My computerless neighbor would like to sell his 1952 CJ3A WILLYS JEEP. The engine was rebuilt,new gas lines,brake lines,seat covers,body panels,floor pan,and more.The Jeep runs and drives nice and was shown last year at the Autumn Roundup in Ludlow”
This sure sounds like a good deal. It has a bobcat hood.
“I am selling my cj3a to make room for my other projects. It has a 4 bolt 350 chevy with an sm420 truck 4 speed, dana 20 t-case, dana 44 rear end and stock front. Brand new 33.12.50 BFG mud terrains. Completely rewired with painless harness. Needs brake work and the rebuilt 4 speed still has trouble shifting into 2nd. Does run and drive (I drive it to work on Friday’s and weekends). $2,500.00 or will sell for $1800.00 firm with different wheels and tires. Call for more info.”
No pics and no price.
“1948 Willys CJ-3A with smallblock Ford V8 engine, the ultimate go-kart project. Roll cage, boxed frame, oversize custom radiator. Comes with soft top. Make me an offer, regretfully I need to sell her.”
This is a non running jeep due as the transmission has been removed.
“Buick 283ci V6, 4” Rancho suspension lift. Muncie 4speed. Transmition has been removed and has a broken spline gear. Trailer not included but is also for sale.”
This is a project that sounds like it doesn’t run.
“In process of conversion to V6 engine and upgrades. Parts include: 2 V6 engines (225 & 231 Buick), 2 Transmissions (T90 & 3 speed top loader side shifter), new pressure plate and resurfaced flywheel, Spicer 18 Transmission, Dana 25 & 41 axles, new 11″ brake drums, Alum plate side panels for body, new leaf springs (extra arch), misc. parts and manuals. $1,200 or best offer.”
Today it’s been all about parts! Here’s another project or possible parts jeep.
“For sale is my 1948 CJ3A Jeep. 4WD. I began the restoration process four years ago and have been unable to continue due to family and job. The old rusted body was removed and a NEW steel body set on the frame (not attached yet) The engine has about 500 miles on a professional overhaul and runs perfect and was not removed from the frame. The entire drive train is still intact. The tires are military NDs and is very good shape. The fuel tank was new just prior to beginning the process. The spare is good the wheel is not. The glass is good. I also have a full metal tip with door (roll sown windows) which is bolted on in the winter. It too is in good shape and may be included for $200.00. If you are so inclined, I also have a full frame and drive train (intact) from a 1953 Jeep Overland Wagon. It has an overhead cam engine, the same transmission and change over case. I’ll throw it in for another $100.00!”
This might be a good price.
“1948 Willys CJ2A. All original except wheels and 11 inch brakes. New tires. Runs and drives good but smokes a little. Selling because I have two other Jeep projects”
It does not appear to be a VEC CJ-2A.
“1946 Willys CJ2A runs and drives good, new fuel tank, new tires. 601-573-0123. Make me an offer. I will look at trade for camo polaris rzr + cash from me.”
“1947 Willys, runs great, new master and wheel cylinders, new steering gear, military tires, two gas cans and roll bar. listing for a friend, no e-mails, contact Dave 417-785-4338, cell 417-844-5790. Thanks for looking.”
It appears to be a running CJ-2A for $1500. I can’t tell what the condition is.
“Original engine, has heavy duty tow bar and skid plates needs a little tlc. Has the original hard top manufactured by Rawson industries very uncommon. $1500.00 negotiable. Call 512 669 3452 or reply to make arrangements to see”
I’m wondering if auto appraisers make their money as a percentage of an appraisal, because every appraisal I’ve seen has been way off of the market value. The one thing I really like about this jeep is the cool old top and doors; it looks in good condition. I’m not sure what a “one piece roll cage” is exactly; maybe it is made from one tube? This jeep has some good upgrades.
“For Sale, 1946 Willys Jeep, Custom built from the ground up. Full one piece roll cage, Warn overdrive (you can split every gear, including reverse). Buick V6, 4 core radiator, power brakes, power steering, tilt / telescoping steering wheel, HEI ignition, manual / electronic fuel pump. This has been in my family for almost 40 years, and was normally ONLY driven to hunt or to get ice cream.”
This looks to be in good mechanical shape. It does not appear to be a VEC.
“1946 CJ2A Jeep good shape artic hardtop and elec meyers plow runs good chip4x4@verizon.net price is neg.”
This jeep appears to have a MB body. This might be a good price for $1000.
“1948 Jeep Willy’s. Has motor, 4×4 locking hubs. Needs right front ball joints for wheel assembly($130.00). Have everything for the wheel assembly plus new brakes all the way around. Great for someone who has time to put into this Jeep!!”
This CJ-2A looks well maintained. With some good updates.
“its a 1946 and it has a little over 5500 miles on it theres no rust and it has upgraded brakes and the original motor transmission and transfercase tow bar and full size spare corvet seats!!!. my name is chance-509-520-6628”
“1946 WILLYS JEEP GOODIE AND SPECIFICATIONS LIST: BRAND NEW FACTORY REPLACEMENT 18 GA STEEL BODY, 360 CI .030 OVER STRAIT FROM THE MACHINE SHOP (A FEW YEARS AGO), OFFENHAUSER DUAL PLANE INTAKE, HOLLEY 4BBL, HEADMAN HEADERS, MALLORY ELECTRONIC IGNITION, TWIN ELECTRIC COOLING FAN SETUP”
UPDATE: Price dropped to $6500
There’s been some investment into this jeep. The Mickey Thompson tires appear in very good shape.
“This is a great driver,powerful jeep. We used this jeep on nice days to enjoy the weather,but we have a new baby and it will just sit.The jeep has a 383 chevy stoker,alum heads,intake,headers,msd ing,holley carb,muncie 4 speed,dana 44 rearend with arb locker and air comp,new wiring,gauges lights,turn signals work,paint is faded or just drive like is. You can not build this jeep for the price. Always starts and drives. call 316-210-7908 Brad”
“A 1946 Jeep Willys. Fair Condition. Needs new spark plugs and possibly coil. Parts are easy to find and relativily inexpensive. Front bumper missing and bumper mount bent slightly. Good jeep, just not used anymore. Will negotiate.”
UPDATE: **SOLD** Was on eBay.
It’s got some floor rust and the body has some dings.
“1947 WILLYS MODEL 2J2A -all original except 12 volt conversion. Solid body and frame but not with out some rust as pictured. 12 volt system all lights and gauges in working order. Original motor in good working order . Working 4 wheel drive with locking hubs. Tires on vehicle and spare in good shape. Extras included: two tires on rims, jerry can holder, tow bar.”
“47 willys rock crawler, chevy 350, turbo 350 tranny, dana 30 t case, dana 44 frount, 14 bolt int the rear, 9000 lb worn wintch, rollcage, 5 point harnes, truck advenger carb great for 4×4, 10in lift, 36 in super swampers 80% tread, lockers frount and rear, 5 13 gears, need to sell fast,”
This runs, drives and has a good body (according to the seller). This might not be a bad deal. It is still a project. I suspect it needs more than just the lights wired and paint.
“Excellent example of a 1948 Jeep Willys. It has been converted to a 12 volt system. Body is in good condition, runs and drives good. Interior is in good condition. It has only been driven a few miles as an occasionally. The jeep has great floors is amazingly solid. This rare CJ2A with a M-38 hard top. i have pics can send to your email and phone. cant get the to download from my phone.”
“1946 Willys Jeep Custom, Four wheel drive with Granny gear and overdrive transmission.
Runs strong with lots of power with a common modification using a Buick V6. Aluminum High Performance Radiator. Polished headers with dual exhaust. HEI electronic ignition. 9000 lb. Warn Wench. Tilt steering column and Custom interior and gauges. Chrome Rally wheels. Very Clean Jeep. Drive it Home”